If the echo-server and echo-client are run in real hw, then
we need to add the used IPv6 prefix to the system. Otherwise
the client is not able to send anything because there is no
route to 2001:db8::/64 network that is used in these examples.
Change-Id: I3a00b77acf1329b3e448bd62ec38cc408c0bd086
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Update CoAP apps project configuration files and also update
according to common net_testing header file.
Change-Id: I09294dfd71e3d0cac980be4ae6d142cc3a59d85c
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Need to use the network buffer when sending CoAP serial message
because the message was constructed to net_buf.
Change-Id: I9422ff3f5f93945f1f9f91f2ed8572e3715338ce
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
User can set the desired number of network packets that are
sent. There is an example config that sends 10000 packets
and then stops the test application.
Change-Id: I5aa9049236f7bebdc9ea9997b9eb1f672c6adcbf
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The loopback test application works now and it verifies that
the data sent is the same as data received. This fixes the
issue described in bug ZEP-101.
Change-Id: I1babfab4db9d4df0e769711aa41983366a8b5065
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
CONFIG_HPET_TIMER_LEVEL_LOW and CONFIG_HPET_TIMER_RISING_EDGE are
selected from same choice option so cannot be both selected.
Since HPET_TIMER_FALLING_EDGE is the default only options overriding
this were left in defconfig files.
Fix following:
Merging prj_x86.conf
.config:10:warning: override: HPET_TIMER_RISING_EDGE changes choice
state
Change-Id: I5c88d2c0ae309afa11d9fae116235a8a424a2408
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The commit cd8d4eb2b7 caused
compilation error in coap.
Change-Id: Ie6fb24d7f213a12936d75a2a2fac350e4965e0b8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows to create outgoing BR/EDR connection and cancel pending
connection before it succeed.
Change-Id: I5c08bb2e89f79c09fa7930f860d6080d902186a1
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
When user creates a socket using net_context_get(), the function
requires local endpoint IP address. This should not be a NULL
pointer because the storage for that IP address was statically
allocated inside the function. Because of this the user needs
to allocate the storage for this and pass that local IP address
to the function. The net_context_get() will fill that local
address to sane value if user passes ANY address (== all bytes
are zeroes) to it.
Change-Id: I88314957f07912d9ecbe517a2402822401d81bd9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The nmi_on_reset.S functions are used by all ARM platforms. It
makes no sense to repeat the same code for all platforms. Moving
the code from each SOC implementation to arch/arm/core.
The same treatment for the NMI_INIT() macro. Moving it from a per
SOC implementation to the include/arch/arm/cortex_m/nmi.h.
Change-Id: I574d8880a44046cc7b9e1b635e80d6e83657b8c1
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
According to documentation, there must be at least one cycle delay
between two consecutive writes of the DR register. Apparently, this is
true for reading too, though undocumented.
The read_dr() inline function is called as follows:
*(spi->rx_buf) = read_dr(info->regs);
which the compiler, with full optimizations on, turns it into:
ld_s r2,[r1,24] <- the spi->rx_buf
sr 0x80000000,[r4] <- this is the strobe bit write !!!
lr r4,[r4] <- this is the FIFO read!!!
stb r4,[r2] <- store the result
Unfortunately, the read from the FIFO is always 0 since the FIFO data is
not yet available.
During my investigations, I found that the following code works:
sys_out32(1 << 31, info->regs + 0xd);
*(spi->rx_buf) = sys_in32(info->regs + 0xd);
This does, basically, the same thing. But the compiler inserts an
instruction in between the write/read:
sr 0x80000000,[r4] <- write of the strobe bit!!!
ld_s r2,[r1,24] <- the pointer goes to r2
lr r4,[r4] <- read from FIFO!!!
stb r4,[r2] <- store the result
A single clock cycle between writing the register and reading seems
to be enough for the data to become available for reading.
This patch adds a nop in the read_dr() inline function.
Change-Id: I0c216d5738d5771835b1052e2e83363e8e3abf0c
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
This creates the QMSI comparator driver which is simply a shim driver
based on the comparator driver provided by QMSI BSP.
In order to enable this driver, the following options should be set:
CONFIG_QMSI_DRIVERS=y
CONFIG_QMSI_INSTALL_PATH="/path/to/libqmsi/directory"
CONFIG_AIO_COMPARATOR=y
CONFIG_AIO_QMSI_COMPARATOR=y
Origin of the file: Original
Change-Id: Iad01cb80f7bb1eff1710cd76cd0afeb70c311e04
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Rationale for defaulting to IAMCU variant is that our most
interesting x86 boards use this calling convention. --all
will test both.
Change-Id: Idaddfec51a74ae85691d348adeeb88a8528060ea
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
For some strange reason IAMCU sets e_machine to 0x06 which causes
QEMU to freak out. This is just x86 code with a different C
calling convention, hack it back to 0x03 (EM_386) before running
under the emulator.
Change-Id: Ia5d51b771cad41f3013eb3d6a17912c8909c9bac
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Many bugs that have taken months to tease out could have been
instantly exposed had we run all our sanity checks on this
ABI.
Origin: Original code or copied from boards/qemu_x86
Change-Id: I6a5038bf99379470c3f736857d104024d3fc7978
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch extends the UART QMSI driver so it supports the IRQ APIs from
include/uart.h. The IRQ APIs are enabled by the 'CONFIG_UART_INTERRUPT_
DRIVEN' option.
Differently from others APIs such as I2C and SPI, the UART API is very
low level. For that reason, the IRQ facilities (e.g. irq based transfers)
from the QMSI driver are not useful to the shim driver at the moment. In
order to implement the IRQ APIs we rely on UART registers defined by QMSI.
QMSI UART header is missing some macro definitions from IRR register so
we define them in the shim driver.
Since the IRQ trigger condition is not configurable in the QMSI shim
driver, this patch also changes drivers/serial/Kconfig so the "UART
IRQ Trigger Condition" choice doesn't appear on the menu if the QMSI
driver is selected.
Change-Id: Idf9a0f6a47af2a550a31f474d721068dca989713
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch extends the UART QMSI driver so it supports line control and
driver command APIs.
The line control function supports the baud rate option only (LINE_CTRL_
BAUD_RATE) and, at the moment, the QMSI driver doesn't have any custom
command.
Change-Id: Icc10cb39b4077ed4ccfefb1f0feecec75b79d67c
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch extends the UART QMSI driver so it supports different baud
rate configurations. The baud rate is set per UART controller via
menuconfig. The default baud rate is 115200.
Change-Id: Iad736d72bd309b8a33ab5d538251fce374e89fd2
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch introduces the QMSI UART driver which is simply a shim driver
based on UART driver provided by QMSI BSP.
This initial version implements only the mandatory APIs 'poll_in',
'poll_out' and 'err_check' which are required by trivial sample apps and
by output functionality from the console driver. The remaining APIs will
be implemented by up coming patches. The driver supports only 115200 baud
rate at the moment.
In order to enable this driver, the following options should be set:
CONFIG_QMSI_DRIVERS=y
CONFIG_QMSI_INSTALL_PATH="/path/to/libqmsi/directory"
CONFIG_SERIAL=y
CONFIG_UART_QMSI=y
This driver has been tested with Quark SE Devboard so this patch also
adds its platform-specific default configuration options to 'arch/x86/
soc/quark_se/Kconfig'.
Change-Id: Ibde1825d4b0349a376a8e7d91cc9de306946b62f
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Microkernel timers are defined at compile time as a static list
but they are allocated dynamically in kernel execution.
The object tracing list will only list those timers that are
currently allocated at debug time. For this reason, timers
can be removed from the tracing list at any time.
A very simple double linked list was implemented to reduce the
complexity of the action to remove an item from the list from O(n)
to O(1) and simplify the remove implementation.
Change-Id: Ib7ea718b52e7c719a32b3fa4ff1d7e6b00482c28
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
The thread monitor allows to iterate over the thread context
structures for each existing thread (fiber/task) in the system.
Thread context structures do not expose thread entry information
directly. Although all the information can be scavenged from memory
stacks. Besides, accessing the information depends on the stack
implementation for each architecture.
By extending the tcs we allow a direct access to the thread
entry point and its parameters, only when thread monitor is
enabled.
It also allows a task to access its kernel task structure
through the first parameter of the thread.
This allows a debugger application to access the information directly
from the thread context structures list.
Change-Id: I0a435942b80eddffdf405016ac4056eb7aa1239c
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
This reverts commit b1a0041de6.
This breaks sanitychecks in CI. The early_sleep kernel test case is failing
randomly.
Change-Id: I129b649f7010da90f52616f6fd63eec8b63f8247
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit f9d1d56153.
This breaks sanitychecks in CI. The early_sleep kernel test case is failing
randomly.
Change-Id: I4b21f926198af9f0703f042fc170226ed6ab4331
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit 0d50329105.
This breaks sanitychecks in CI. The early_sleep kernel test case is failing
randomly.
Change-Id: I015f20699c052b4089076699fc0180945c4d3d16
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Exposes the CONFIG_THREAD_MONITOR functionality as part of the
object tracing header.
Change-Id: I2022a580df2cf33e543b980dc9c33b9adca3d3bf
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Adds the sanity test to integrate the kernel object tracing
API. The test implements the philosophers demo and adds
an additional test thread that uses the kernel object tracing
API and test for the correct output.
Change-Id: I2f01f7b3386afd4783ae58b5311eb7d6ee5a3cea
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Origin: Original
Test fails in CI, disabling until we have a resolution.
Change-Id: Ie8e1ca00b08238c2c2a4feefbe08140c762e6d2f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Restructure the kernel's object tracing implementation
to provide a public API that allows debug tools to use
the debug hooks easier and allows kernel developers
to extend the kernel's object tracing scope and include
new kernel objects easier.
The API provides the trace list abstraction to keep track
of different types of kernel objects. The API contains
a simple single-linked list implementation that allows
to save space and simplifies the access to the data for
debug tools such as gdb.
Change-Id: Ic4d393d584576f67f2c5b706e61bae08869debba
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
This adds a GAP service sample and make use of it in shell test which had
a copy of this code.
Change-Id: I5f03fb7db5349236e41bc30eb884c134136439e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If CONFIG_BLUETOOTH_GATT_DYNAMIC_DB is defined it shall be possible for
the application to register any extra service it needs.
Change-Id: I7186f3faf45e9295e0c8b32dce030099a142c500
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This moves IPSS sample code to samples/bluetooth/gatt which shall become
the default place for GATT related samples that can be reused.
Change-Id: I04089f6e43bfcc30ee1c7cc766620f19e3dad08e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
csma MAC driver queues outgoing frames, returning an OK status code immediately.
This defeats logic in sicslowpan fragmentation driver that drops remaining fragments
on send failure. The result is packets reported as sent successfully when they were
not, fragments sent that cannot be reassembled by receiver, packets dropped before
the first fragment even reached the radio driver.
nullmac MAC driver sends frames synchronously, resulting in sicslowpan driver working
as intended.
The MAC driver used by 802.15.4 is selectable now, nullmac is default but csma can be
used instead.
Change-Id: I261d551421a8f55634acb1c528f8f82bea49332d
Signed-off-by: Vlad Lungu <vlad.lungu@windriver.com>
Move network testing setup from echo-client to common net_testing.h
file which makes the application much simpler.
Change-Id: Ib1a90b9d87014b7f9adc5f6865ce0fc9faa13422
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move network testing setup from echo-server to common net_testing.h
file which makes the application much simpler.
Change-Id: I6f68826916c870ad7db597d30f20245bada70091
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Collect common routines used in every network sample application
into same file. These routines are used when testing with
qemu and slip.
Change-Id: I02f20b3a9bfa1e886846801b22f43a1d06c59930
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The driver should read the mac address from the chip but in
case of cc2520, the chip does not have it. So generate a
random mac address for this invocation of the device.
Change-Id: I2d0cf2ee70525e7f5e65da9fb8ceaa1a2dccecdd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that the internal libc has the off_t type it's the natural choice
for the offset parameters in the flash API.
Change-Id: I69999999625b46634f6d3008fe1b3f82c17d357c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add definition for the POSIX standard off_t type.
Change-Id: I1142428a3d226d641a8628cbba71cb3ea341ef92
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's no need to have a separate file for this, and we'll be adding
other types like off_t here soon as well.
Change-Id: I40629a5a0fba7af44828eaeead294e4e55844bb0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch removes the macro UART_IOAPIC_FLAGS from Quark SE and D2000
soc.h since it is not used anywhere in the code.
Change-Id: I0fd42fac2f02e8617bd92c73c1a0354ef2d7a71a
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This makes the ordering consistent e.g. with SPI, Bluetooth and
Networking APIs. This also follows the order of parameters in the
POSIX read/write APIs.
Change-Id: I4f11c8c90ccadf176d79f6a7bbd98aac61c26cf5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
