Currently all received packets are dropped as this is just
the initial patch enabling the receive support.
Change-Id: Ib06735f498a80edb8c9f7c5ec6f536a5ac1d362a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For both of these, we send the .elf binary over the JTAG and it gets
written directly into SRAM. The CPU boots the image from the entry
point (__start).
This does not provision the kernel onto device's User Flash Memory
(UFM). Implementation of this is still in progress see ZEP-273.
Change-Id: Iae8188a21e4a3eecfda0f4f0bb220c0607d719cb
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The emulator supports all the integer math instructions and has
the necessary registers for exception debugging.
Change-Id: I55938d9e3a4b9d219f6fee06fe070e860ca71d4b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Remove unused defines and turn off debug options.
Change-Id: I21e6b54a81505783396991e165a8087372d4986b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The double include of Kconfig.debug causes the following warning:
scripts/kconfig/conf --silentoldconfig Kconfig
/home/jh/src/zephyr/net/ip/Kconfig.debug:45:warning: choice value used outside its choice group
/home/jh/src/zephyr/net/ip/Kconfig.debug:47:warning: choice value used outside its choice group
/home/jh/src/zephyr/net/ip/Kconfig.debug:49:warning: choice value used outside its choice group
Change-Id: I3f59587eed656b67e1f69e2a8151288f41b50769
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some non-ASCII characters were used in code comments.
Change-Id: I77f13ca1648f34dc5dbd9ea78ccd2964a73a1712
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Ensure that all parameters and return values are properly documented.
Change-Id: I04b19701355e994ba45cbc98167386c01d0f607b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Tests have issues right now so these will be activated later.
Change-Id: Ib5549f9ed5600a20b2cfddbddcde8e7f7b297eef
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Using net_receive with long timeouts breaks net_reply. Sending a lot of
packets in a row without yielding causes failures since the network
stack can't send them. Add yield code for both net_reply and net_send.
Jira: ZEP-469
Jira: ZEP-497
Change-Id: Ic59769462e0575da0898d35745d49647f7e43edd
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
When handling TCP packets, ip_buf_len is set 4 bytes too big.
Recalculate the value when handling it.
Change-Id: I6502bd58d3860f6318dca668b7b1d6b556d34c2a
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
There is now Kconfig option to enable net_if debugging.
Also use NET_DBG() instead of directly calling syslog macros
so that we can print fiber id automatically.
Change-Id: I150d363006e4be358c38308a93771ba444b0835e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of directly calling printk/printf, the network printing
macros will use syslog macros defined in sys_log.h
Change-Id: I3f12f81557f50b24ca47a43f345162f9ffbd574c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The send() function is called from IP stack and it is used
when the network packet needs to be send via a specific
network interface.
Change-Id: Id6ce86b1748915fee73b62366dee13fcb7cf11a1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The YAIP stack uses CONFIG_NET_IPV4 to compile IPv4 support.
Change-Id: Ia4a579591d6d2050e168c35e68546281043d53a8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This will return the network interface that has some specific
link address.
Change-Id: Iaebcf6e769d4f91f3cda6d3a0779324f89603b54
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User does not need to call net_init() as it is automatically
called when system is brought up.
Change-Id: I2cb10f4402088a0ca4feff226b65341f337194ea
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The YAIP stack uses CONFIG_NET_IPV6 to compile IPv6 support.
Change-Id: I25c3b2d6775ed610fca43960a569ddab0ec470aa
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
uIP specific debug options are shown only when uIP is
being compiled.
Change-Id: Ieea5db021227a2b3cbe625a9c774e7c1f99b5e83
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This macro can be used to check stack usage. It should only
be used when debugging is activated.
Change-Id: I99fe6f9db1f3e955152a91f3a18d031126172cfd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The NET_IF_INIT() macro used parameter pasting incorrectly.
Change-Id: I40a988ffb06ce135731cd69f18931b7507cd71cc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The SLIP driver is using UART pipe driver to communicate with
host when Zephyr is running in Qemu. Currently this is only
used by networking sub-system when testing the networking
stack.
Change-Id: I432b4136670766a7fc190f146057924c266f9bea
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User should use the net_nbuf API that is supporting a concept
of RX, TX and DATA buffers, instead of using directly the net_buf
low level API.
Change-Id: I3b8f5f13cd37d42d2322a58b35573e117d520c54
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Save 12 bytes per IP address if IPv4 is active and IPv6 is not.
Change-Id: Ia01d2feb83e6ba80b2775f9eed3065c956932632
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Network drivers should call this when new data has been
received from network.
Change-Id: Ife78fa0683b8c410c38358300a6a18e9325f0ef8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Network packets to be sent are placed to correct fifo that
is allocated to certain network interface.
Change-Id: Idd5eded42758c5bed2c18769122c38d9d03dc419
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This echo-server does not yet do anything useful.
Change-Id: I317051b3a2bfb0a80584ad385c2f308978a243cd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This will be used by the new network stack to relate a device to actual
network context, and used in the different layers (mac, ip ...).
Change-Id: I30c08fa975314544c36b71636fd9653d562891b3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It only describes the structure for now, but will then provide helpers.
Change-Id: I7ac7717a3289086dac50d90e25b2a1ce7d7abc91
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use CONFIG_NET_... prefix for Kconfig options.
Change-Id: I3e882845e7c09ba910f108179208fcaf33360f21
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is a placeholder that just compiles but does nothing else.
Change-Id: I9689fa26eb13bc23d29940938f7b3c11f32b2ff1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Utility function net_buf_frags_len() calculates amount of data
stored in the fragments.
Change-Id: I89ebc8dac4f216ff9e77b5c44002082398957f7b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
More realistic IPv6 packet creation tests created.
One test creates one big IPv6 packet and manipulates that.
Second test creates a list of IPv6 header + data fragments
and sets some user data in those fragment buffers.
Change-Id: Ic8309ff115e1d735e98c30b3c8292b0d6ffc5f42
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add tests for checking that the net_buf fragmentation works ok.
Change-Id: I778f79bae971314b6f19c1bf00ed42e1c2128e99
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allan fixed the underlying issue, re-enable.
This reverts commit 19fa82ab91.
Change-Id: I6e517f76a6650a3e9ba5a09118187e6c965a147a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If the channel is being destroyed the RTX work should be cancelled as
it may cause destroy to be called again.
Change-Id: I49c10d64a2108719d28e456fb5b4bfb50ef8a140
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
