The way the build system works, the Makefiles under ext/hal/* are being
included unconditionally, so anything they add to the build flags needs
to be protected by the correct configuration value.
Change-Id: I238e04cd836dd9e4c5d83040822039c68abb6b17
Signed-off-by: Iván Briano <ivan.briano@intel.com>
This patch fixes an unreachable code condition in the uart_console
driver.
If UART_CONSOLE_DEBUG_SERVER_HOOKS was not defined
handled_by_debug_server in console_out was always 0.
This issue was reported by Coverity (CID 131627).
Change-Id: I4376c3e5b3e68220218df6aabd91b6a8900ca31f
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch fixes two "Unchecked return value" conditions into the bma280
driver.
The issue was reported by Coverity (CID 151953).
Change-Id: I2e595b67619411594cec527f358f6c3d3d034550
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This issue was reported by Coverity (CID 151952)
Change-Id: I59a20a3ccbe606ef634db98ac6cc6889a3973ec3
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
This fixes an uninitialized pointer being pass and evaluated by
a subsequent function
This issue was reported by Coverity (CID 150824)
Change-Id: If1f636a44cc675b56e426b1de85895b74ba7105e
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
testcase.ini was not building for ARC. This app would
run on x86 and arc.
Change-Id: I961d56079aa1db7d84e0fcc87780ba11d7f4d831
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Remove redundant platform filtering and only use SOC filtering
Change-Id: Ib823e076a874ce61a235eca63eebb7f19d2fdd30
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
The variable type mismatching was caught by LLVM.
Jira: ZEP-1179
Change-Id: I084406601badc64c257cbdd82b9c8b7509549303
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The variable type mismatching was caught by LLVM.
Jira: ZEP-1179
Change-Id: I1193a946ea5814510e6c07668c5d05a5d91445a8
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The variable type mismatching was caught by LLVM.
Jira: ZEP-1179
Change-Id: I402c348af142342e37e93619c4da6e3a5bfd82da
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This patch fixes unchecked return value conditions in the bme280
driver.
This issue was reported by Coverity (CID 151961, 151959, 151955).
Change-Id: I3a2dfbabd41ae52b00fa512a40e00c2e36c3b5ca
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch fixes a less-than-zero comparison of an unsigned value
condition present in bmi160 driver.
This issue was reported by Coverity (CID 152002, 152003).
Change-Id: I703066519652ac1ecdd9ddf7e97ec7dcbe2a9e27
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This sample was created intially when there were no other
samples in place to enable the CONFIG flags to build code
inside those flags. However, those CONFIG flags are now
guarded with corresponding "SUPPORTED" flags which are
enabled based in Kconfigs of socs based on their support
for that power feature. This app is for x86 and those
features will not get enabled for this configuration. If
it is still required, then we would need to fake such
support in Kconfig.board of qemu_x86. Removing it, because
those flags will get enabled by sample and test apps of
socs that support the power features, causing code inside
them to get built.
Change-Id: I647be9289a49d69880811abee499a4efd61bbc6a
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Cleaned up and removed some unnecessary code to avoid
distraction from main sample implementation. Updated some
logic based on new PM interface in soc area. Updated README
to indicate it supports x86 and ARC and updated sample
output of both architectures.
Change-Id: I1c9c8348dae403b7ca6fe17ab867e3fbef06ae60
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
The variable type mismatching was caught by LLVM.
Jira: ZEP-1179
Change-Id: I37934ef2ee47c521a78086564876843794688d55
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This reverts commit
"kernel/arm: add comment about _is_next_thread_current"
and fixes the interrupt locking issue.
The comment would have been right if only reads were done the ready
queue, but that is not the case. It turns out that the comment was written
ignoring the fact that _is_next_thread_current() updates the next thread
cache when fetching the next thread.
Change-Id: I21c9230f85f4f87a6bbf14fd4a9eb7e19b59f8c5
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Though Cortex-M4 could optionally have a floating point unit,
the MCU in the cc3200 in fact does not have an FPU.
Enabling CPU_HAS_FPU caused applications built with CONFIG_FLOAT=y
to crash during an early call to enable_floating_point().
This patch was validated by running microPython, which is one
such application.
Change-Id: I8bfd42c456524e152cbbb983001d9540d93fbe98
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Normally, _is_next_thread_current() must be called with interrupts
locked, but the ARM interrupt exit code does not have to do that. Add
explanation why.
Change-Id: Id383b47a055fdd6fbd5afffa52772e92febde98f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
By default, when a 'fatal fault' message is seen in the output of any
testcase, it is consider an inmediate fatal condition and the test case
is aborted.
However, in all such cases, the testcase is provoking the situation to
verify the condition is caught. In this case it shall NOT be considered
a fatal fault and the default overriden to allow it to proceed.
Change-Id: Id4e9138e5f0fcb8cd77efbb1831897fb0946ba20
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This TC is only exercising the API, as we don't have a feedback loop
mechanism to verify whichever values are fed to the ADC.
Fixed the loop to complete after 10 runs; on each run, print the
values and actually report the difference between them. With no inputs
connected (aka: floating), they should be reporting noise relatively
close to the previous reading, so we might want to use this delta as a
testing pattern (assert if the delta is higher than some value, but
I've seen variations as high as 40M units). For now, the test is just
happy with being able to read them.
The buffer has been re-typed to uint32_t so we can iterate over it
without casting tricks -- it requires then only a single cast when
initializing sample.buffer (which shall be a void* anyway).
Duplicated the buffer, so we can flip/flop between two buffers to
compare against the entries read in the previous run.
v4: fixed missed warnings
Change-Id: If6b48b92231007202d74f5c042f6d0cf3fdcb60a
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This test case just exercises the PCI enumeration and there is no real
way to test success/failure other than running it and the kernel not
crashing.
Moved to ztest.
Retag so it is actually ran on QEMU/x86 and galileo once we deploy in
the HW pool. Note this means that we need to force CONFIG_PCI on
Qemu/x86, which can run this testcase.
Change-Id: I85b64800f7d989357927b4a25777041047293b34
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Update file to catch any regressions and major changes during
stabilisation period.
Change-Id: Id30dd1827034b96c5478c78f9c388384f51bcbec
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move away from legacy APIs and use unified kenrel instead.
Change-Id: Icae86beec66df1b041405cbe3455913630fc8ad1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use unified kernel APIs and align syntax after function name changes.
Change-Id: I028f4faeaf33e28197d5f705063459188272027d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These should help to make it easier to understand code passing
specific durations to the kernel APIs.
Change-Id: I8682fafc291e8af56fd0289d0cab8c736b88da59
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
SYS_DLIST_FOR_EACH_NODE() is marked as non-safe when an item is removed
from the list while looping over it. This is not true per-se, since the
item, when removed, keeps its next and prev pointers intact; however, it
is true if the item is then put into a list, be it a different one or
the same one. To prevent this, SYS_DLIST_FOR_EACH_NODE_SAFE() must be
used.
_mbox_message_put() can remove items from the rx queue and then put them
in the ready queue: this would cause the loop to start processing other
ready threads as item in the rx queue.
k_mbox_get() also removes items, from the tx queue, but does not seem to
add them to another list; however, it now uses the safe version as well,
since that is the proper usage.
Change-Id: Ieccbff238fc8a036c0d53d873eaaf55f4f5a14af
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Switch left-over usage of TICKS_NONE and TICKS_UNLIMITED to the new
unified kernel counterparts K_NO_WAIT and K_FOREVER.
Change-Id: I2f2a16360e816f9f8791eb216deb3c70b8cc87df
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The NBLE driver is now deprecated and will be removed in a future
Zephyr version.
Change-Id: I50753f8cf8566ac1e4e73df480c96253c199e6a7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There was a lot of duplication between architectures for the definition
of threads and the "nanokernel" guts. These have been consolidated.
Now, a common file kernel/unified/include/kernel_structs.h holds the
common definitions. Architectures provide two files to complement it:
kernel_arch_data.h and kernel_arch_func.h. The first one contains at
least the struct _thread_arch and struct _kernel_arch data structures,
as well as the struct _callee_saved and struct _caller_saved register
layouts. The second file contains anything that needs what is provided
by the common stuff in kernel_structs.h. Those two files are only meant
to be included in kernel_structs.h in very specific locations.
The thread data structure has been separated into three major parts:
common struct _thread_base and struct k_thread, and arch-specific struct
_thread_arch. The first and third ones are included in the second.
The struct s_NANO data structure has been split into two: common struct
_kernel and arch-specific struct _kernel_arch. The latter is included in
the former.
Offsets files have also changed: nano_offsets.h has been renamed
kernel_offsets.h and is still included by the arch-specific offsets.c.
Also, since the thread and kernel data structures are now made of
sub-structures, offsets have to be added to make up the full offset.
Some of these additions have been consolidated in shorter symbols,
available from kernel/unified/include/offsets_short.h, which includes an
arch-specific offsets_arch_short.h. Most of the code include
offsets_short.h now instead of offsets.h.
Change-Id: I084645cb7e6db8db69aeaaf162963fe157045d5a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This will allow making some arch-specfic parts arch-agnostic. Some
definitions that are currently in arch/<arch>/include will end up in
kernel/unified/include.
Change-Id: I4df71090e20a5599e70fb578b36f9211411b56ad
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The unified kernel is now the only supported kernel, so this
option is unnessary. Eliminating this option also enables
the removal of some legacy code that is no longer required.
Change-Id: Ibfc339d643c8de16a2ed2009c9b468848b8b4972
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Use k_current_get() instead of the deprecated sys_thread_self_get()
API.
Change-Id: I4ddb45f299373237690b2f4ca614e7fd3b6c0c36
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix compilation error when CONFIG_USB_UART_CONSOLE is not enabled:
drivers/console/uart_console.c: In function 'uart_console_init':
drivers/console/uart_console.c:497:12: error: unused variable 'dtr' [-Werror=unused-variable]
uint32_t dtr = 0;
Change-Id: I592724150f86199f6a57354c3246197db2ac7a01
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In addition to providing documentaton, we also modify the static_lib
example to use outputexports instead of the double-include
Makefile.toolchain trick. For this to work well we need to fix a tiny
bug in the dependency handling in Makefile.inc.
Change-Id: I6571bc681bc34155f37cff1eccc2ea12ed52ef07
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Sample to show the USB UART console output.
Jira : ZEP-775
Change-Id: I70220daf8e63a0847b10cc094665ef6a4bc38907
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Add support for console output via the USB UART.
Note that console input via the USB UART doesnt work.
Adds a simulated poll method for UART interface exposed by USB.
Jira : ZEP-775
Change-Id: I357827ea52c027eb000baed80225f422df1f3358
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Add spi flash erase boundary check. The erase boundary must be
4K-aligned. So, the flash chip will round down an non-4K aligned
address to the nearest 4K boundary automatically. As a result of
this, the erase area will start from a different address (if the
API caller specifies an non-4K alighed address), even though the
size of the erased area is the same as what is specified by the
API caller. Let's add a boundary check to make sure the starting
address (from the API caller) is 4K aligned.
Correct an error in the highest address check. Because of the
error, the erase api call will fail if the flash's highest
address byte is involved.
Jira: ZEP-1277 ZEP-1278
Change-Id: I8b6be57cc8f636f94e5fe67d5a492841a8555005
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
tests: power_states app updated to support SoCWatch collection
Add CONFIG_SOC_WATCH option for enabling the SoCWatch
QMSI driver and associated instrumentation hooks.
Bug fix for soc_watch.c to use local irq_lock/unlock
This will be put into QMSI as well.
JIRA: ZEP-1121
Change-Id: I0514324e81ca02c1d01ffc2d6cf4d31aee491544
Signed-off-by: Jon Moeller <jon.moeller@intel.com>
Right now the build system builds the host tools over and over again, in some
environments especially when running in an IDE on windows for example,
this is not desired and a set of pre-built host tools should be used.
Provide an option to use pre-built tools instead of building them
from source.
To use, set PREBUILT_HOST_TOOLS to the path where all pre-built host tools
are hosted. To get a prebuilt version of the host tools, build without the
variable set and copy the generated host binaries from outdir. The following
tools are supported:
* conf
* fixdep
* gen_idt
* gen_offset_header
Jira: ZEP-237
Change-Id: Iea505bfd0b50f851ee2781b5117bb6085ab20157
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add the device_ctrl hook to the ADC driver of the Sensor Subsystem,
using the QMSI APIs to save and restore the driver's context.
Jira: ZEP-667
Change-Id: I8b89a875d8185cc4db3c4bfc30ef0f39c6589df1
Signed-off-by: Iván Briano <ivan.briano@intel.com>
This commit updates the spi_qmsi_ss driver by adding save/restore
context functionality for power management, using the corresponsing
QMSI APIs.
Jira: ZEP-664
Change-Id: I9e62729f91c4808eb557d8a64c0f10955f5456f3
Signed-off-by: JuanX Solano Menacho <juanx.solano.menacho@intel.com>
This commit updates the i2c_qmsi_ss driver by adding save/restore
context functionality for power management, using the corresponsing
QMSI APIs.
Jira: ZEP-666
Change-Id: I36fb18b52edd4dac4c4b6cb98162adbca74800cb
Signed-off-by: JuanX Solano Menacho <juanx.solano.menacho@intel.com>
