This macro can be used to check stack usage. It should only
be used when debugging is activated.
Change-Id: I99fe6f9db1f3e955152a91f3a18d031126172cfd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The NET_IF_INIT() macro used parameter pasting incorrectly.
Change-Id: I40a988ffb06ce135731cd69f18931b7507cd71cc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The SLIP driver is using UART pipe driver to communicate with
host when Zephyr is running in Qemu. Currently this is only
used by networking sub-system when testing the networking
stack.
Change-Id: I432b4136670766a7fc190f146057924c266f9bea
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User should use the net_nbuf API that is supporting a concept
of RX, TX and DATA buffers, instead of using directly the net_buf
low level API.
Change-Id: I3b8f5f13cd37d42d2322a58b35573e117d520c54
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Save 12 bytes per IP address if IPv4 is active and IPv6 is not.
Change-Id: Ia01d2feb83e6ba80b2775f9eed3065c956932632
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Network drivers should call this when new data has been
received from network.
Change-Id: Ife78fa0683b8c410c38358300a6a18e9325f0ef8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Network packets to be sent are placed to correct fifo that
is allocated to certain network interface.
Change-Id: Idd5eded42758c5bed2c18769122c38d9d03dc419
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This echo-server does not yet do anything useful.
Change-Id: I317051b3a2bfb0a80584ad385c2f308978a243cd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This will be used by the new network stack to relate a device to actual
network context, and used in the different layers (mac, ip ...).
Change-Id: I30c08fa975314544c36b71636fd9653d562891b3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use CONFIG_NET_... prefix for Kconfig options.
Change-Id: I3e882845e7c09ba910f108179208fcaf33360f21
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is a placeholder that compiles but does nothing else.
Change-Id: I9689fa26eb13bc23d29940938f7b3c11f32b2ff1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
getenv() returns an string of unknown size, so Coverity warns that it
might be used to overflow the stack in the call chain off
conf_read_simple().
To avoid that, wisdom says copy to an string of known size and pass
that.
Change-Id: I9e468de0ae66429062027f58fe0a0a4e1197218f
Coverity-ID: 150819
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
(cherry picked from commit 0307d6ea5fa361abe5c9fb1872f9dc8256208ee0)
Certain structures and defines in this file are from
from mbed's implementation. The file header is updated
as per this.
Change-Id: I688917cdd17cfc8b27d5b78181ced90df73c9efd
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
The current ARC GCC compiler used in Zephyr SDK v0.8.2 generates
incorrect code when using the "-fno-omit-frame-pointer" option. This bug
should have been fixed in the 2016.03 release of the compiler.
Jira: ZEP-1243, ZEP-1403
Change-Id: I0901f55973c1ea37491b07bf625d0d1918803f3e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added new option to make sanitycheck script error on deprecation
warnings, to use:
sanitycheck --error-on-deprecations
For example, to find usage of legacy APIs in master, run the following:
sanitycheck -e legacy --error-on-deprecations
Change-Id: Ib83c266c8357475840dea03d62ceefed72b73f27
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The reversal of the meaning of a value of 0 from k_sem_take vs
nano_sem_take has caused some issue when porting code from the legacy
API to the new API, so put some emphasis on this difference.
- Add a note in the API description.
- Put the call to k_sem_take and the reversal of the return value inside
of nano_sem_take on one line so that grepping on it shows the
reversal.
Change-Id: I2f4ba58dc087176d68b55371fa6e367b72559e70
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This implements a modified version of CDC ACM class driver
in a WebUSB compatible way. It adds the WebUSB descriptors,
custom and vendor requests handlers so that the host OS and
browsers can get the required BOS descriptor and supported
origins from the device. It also adds a custom interface
class so that the interface will not be claimed by the host
CDC ACM driver.
A simple echo app also included in this commit to demonstrate
how to create and use a WebUSB interface, as well as the
communication between browser and WebUSB enabled device.
WebUSB Spec: https://wicg.github.io/webusb/
Origin: Based on CDC ACM device class driver in Zephyr
Jira: ZEP-744
Change-Id: I2eac10bd718e8fce35cda52e7c2ac425c3210e23
Signed-off-by: Sudarsana Nagineni <sudarsana.nagineni@intel.com>
Revise the document to reflect the latest changes including
the updated concept of SOC interface instead of PMA. Simplified
and enhanced areas that were known to cause confusion. Added
descriptions of new APIs and usages.
Jira: ZEP-1386
Change-Id: I5fa74d85245924f512c22d9d977dd0c9ea62b6ce
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Interrupt must be locked before inserting a timeout in the timeout
queue.
Change-Id: Iab0bf01f393e66a6403d2f85e899dbf737da4afc
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Having CONFIG_ASSERT=y and CONFIG_DEBUG=y was causing these tests to
overflow their stacks and crash.
Change-Id: Ibcd57abe044a2203d1a954a4c5755218af48f302
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Too much code might run with a stale icache, before _PrepC(), so move
the invalidation/disabling code earlier. The asm code does the exact
same thing disable_icache() and invalidate_dcache() were doing.
Change-Id: If52f4e4a1de546fb82873c91ead95614a44b106d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
If a particular project needs to add additional data to the
binary image, in most cases the entire linker script needs to
forked into the project space, causing maintenance issues if
the main linker script is changed.
Now we add some Kconfig options to allow a project to specify
some additional linker scripts which get included by the main
one in a few key areas:
1) In the definition to the 'rodata' section, which can allow
additional data to be included in this ROM section.
2) In the definition to the 'datas' section, which allows
additional data to be included in this RAM section.
3) Arbitrary additional sections to be included at the end of
the binary.
For 1 and 2, this is useful to include data generated outside of
the normal C compilation, such as data structures that are created
by special build tools.
3 is useful for including arbitrary binary blobs inside the final
image, such as for peripheral or co-processor firmware.
Change-Id: I5738d3d6da25f5bc96cda8ae806bf1a3fb34bd5d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Tag all legacy kernel tests and samples as such.
Change-Id: I43b24acb71c282ed14ff6e6ef06c9542bad86f6a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch refactors the main Kconfig file in order to align it with the
Zephyr code style and to make sure that each Kconfig configuration
portion is easily identifiable.
Change-Id: Ib226aaa9a98e9b08a47d9d1c329f18f4f6936620
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
- {} are always required on if/for/while
- no break line before an if, if condition is testing previous
assignment
- parameters indentation etc...
Change-Id: I83f217c02733b9e63ef1e752f55937f3d7dc03e1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
s/nano_sem/k_sem + some necessary changes for the k_sem to work.
Change-Id: I96377083f5e17631b63d6da1a0546966ec95ff8b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If SPI 1 is selected and GPIO CS trick as well, then do not use
controller's CS but GPIO 0 instead as a CS.
Change-Id: Ifc17cdc44f47b9348f4c655d510349e3124dceea
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fix typo introduced by commit 6b2443e("console: Fix warnings
related to the use of deprecated APIs")
Change-Id: I6b4db8ba781fecae4413f473001f40ff53c765f0
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
With the current interface if multiple counters/timers are present in
the system, it is not possible to select from which one to read the
current value.
This patch fixes the behavior.
Change-Id: Id1ae1f2330e98d078f755c0b81c3b176e90b8389
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch refactors the main Kconfig file in order to align it with the
Zephyr code style and to make sure that each Kconfig configuration
portion is easily identifiable.
Change-Id: Iba83be8ae154df4b29ff423b4c3cc97a78c93e00
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
