This commit adds one routine previously found at the DNS resolver
library. The net_nbuf_linear_copy routine allows to "linearize"
an IP stack network buffer. This routine is required by functions
that must jump between big chunks of data that in this case may
lie between many fragments. Tracking fragments may be a tedious
task, so getting a linear copy of the buffer will reduce code
complexity altough it increases memory consumption.
The DNS client library is updated to reflect these changes.
Change-Id: Iae321f99fa9b05fae7e722b6d41baac427d82d7e
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
It's currently hard to find a Beacon enabled network. So let's switch to
active scan for now.
Change-Id: I192e7c3128f9488fb680ea7f23221b2b4aa52188
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
PAN coordinator can decide to eject a client device from the PAN by
disassocating it.
Change-Id: Ia868554d40a7aceb4c75a0b426db45f56003fbb7
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If associated, this will request to disassociate from the PAN. That's
only client side, PAN coordinator can also disassociate a client, which
case is not handled here.
Change-Id: If308f51b62c5006b4a2db53d0c891e8192f3c198
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Active scan differs from passive scan by sending a Beacon request (thus
the "active" part) and wait for beacons in reply to it.
Taking the opportunity to add debugging output to scanning logic.
Change-Id: I85001b1ea17f4ec4cd315dc39524c4d8f053cee2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now we can handle incoming MAC command frames.
Association result ONLY for now.
Change-Id: Ib54b1757185ed079fe6914fa7939347020e006d9
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Such management request will enable association the 15.4 device to an
existing PAN.
Change-Id: I61ffd5e4d8192716e067c5225b3327f08944063b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It will print-out the results, if any.
Change-Id: If988a6dc3c4504a8d4aa947d3d3f949870b638c8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is used only for scanning at this point. But will be needed to get
slots information and else in the future.
Change-Id: Ib917469134c6ba5a54485847c612d3755f62ed35
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Currently, as only CC2520 device is supported: it will loop over the 16
channels present in 2.4Ghz spectrum. However, this will need refinement
as soon as other spectrums will be in use: L2 layer could request
capabilites from the device in order to know which range to use.
Scan result is done one at a time for now. It's unlikely going to fit
all production use case, so it's going to change in the future.
Change-Id: I2fafec49eb5cbfca1a4f04107ba3b6511d7d956d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It can be thus used to track the status of network interfaces in order
to act accordingly (no need to try sending things on network if the
interface is down for instance).
Change-Id: Ie160ef0dfdad6679d531d05a7abada96ad1de7db
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fixes two references to yaip that were were left behind after net/yaip
was renamed to subsys/net/ip. The zperf sample needs net_private.h, so
the include path is updated. The dhcpv4_client sample doesn't need it,
so the path is removed.
Change-Id: I189f1b58191524330254a5b7b31a9a4974956728
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This adds enable callback which can be used to notify the L2 driver about
changes of interface state, the L2 driver can then check if the new state
is allowed and reject otherwise.
Change-Id: I4bb6b1e32be2633f24694c0246585f803f8c645d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds NET_IF_UP flag support indicating the interface is up,
currently this shall only be used internally by the driver, later on it
shall be possible to make it public by using dedicated functions.
Change-Id: I38090da4030395b2341733b846004789416d61c1
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
GCC 6.x for ARC does not recognize the options
-mARCv2EM and -mav2em anymore.
Both options replaced in Makefile by -mcpu=quarkse_em.
Change-Id: I9dec26dd64b4738976704a39455fe4241406db9e
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
GCC 6.x for ARC does not recognize the options
-mARCv2EM and -mav2em anymore.
Both options replaced in Makefile by -mcpu=arcem.
Change-Id: Ic86bf51cd5fb1a67ba2cd75998cd907e26996347
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
SW0_GPIO_INT_CONF shall allow boards to define the
interrupt configuration for SW0 without having to modify
the button sample app.
If SW0_GPIO_INT_CONF is defined set EDGE to it, otherwise
used default EDGE value.
Change-Id: Ia697e06debc341463ed9cdee1db564f3727d27e3
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
The sensor_attr_set() wrapper deals with drivers that do not support
the attribute set API, there is no need to provide a per driver
implementation that only return -ENOTSUP.
Change-Id: I1568ab018988fc560bd89ab96f2f2256ddd5b7e1
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
UART 16750 is basically a UART 16550 with a 64-bytes FIFO.
The 64-bytes FIFO can be enabled via register FCR.
Account for it in the uart_ns16550 driver whenever the
CONFIG_UART_NS16750 variable is set.
Change-Id: I2342b28a41d03c96410bbfbe57e4b5a4e335731d
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
It's possible for the Public Key to be available by the time that the
bt_hci_cmd_send_sync() returns, so we need to make sure the flags have
the right values no matter what.
Change-Id: I053093b6611af360f52b14ddca50d409388f9475
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since RTTWriteNoLock is not thread-safe or preemptable, it is necessary
to lock interrupts around the calls to it.
Change-id: I38b7e37a0f46e77bf82c1e07d549414393e84a51
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In the documentation you can now reference issues in JIRA using the
following macro:
:jira:`ZEP-308`
This will link to the JIRA in the macro.
Change-Id: I3785d4abd243f5c5b75e9e3b58a449e2a3225415
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
With LE Secure Connections the longest packet we require is 65 bytes
long: 64 bytes of Public Key data + 1 byte SMP opcode.
Extend the size of the L2CAP pool blocks so that they can fit such
packets and therefore one can use 70-byte
CONFIG_BLUETOOTH_CONTROLLER_TX_BUFFER_SIZE to achieve LE Secure
Connections pairing without HCI fragmentation.
Change-id: I2f11b4277ec5a24ceba79bccc7d84c64065b6e84
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
As per the spec, the station which disconnects the last dlc
should disconnect session also. In case if remote does not
do it we need to disconnect otherwise rfcomm will be connected
without any dlc. So this starts an idle timer to handle the
above scenario.
This also starts a disconnect timer to handle in case remote
does not respond to session disconnect request.
Change-Id: I3b45aa5bf4c35fd81dc10974f2b0b6d4cfe4ea7d
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Rename cind_status_handle_values to ag_inidcator_handle_values.
Because the same function will be reused internally for +CIEV
Callbacks.
Change-Id: I875064de17700d72ea89dbbe0f5cb6554c813a5e
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Reset AT and COMMAND state to process unsolicited response received
after processing result recieved for AT command sent to AG.
Change-Id: Id2a5827ce5b098336291696157027699479478cf
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Displays the present value of the indicators in the Handsfree
application.
Change-Id: I666ff2b15e70de8c1a26b902077d79c5c1a9d5fe
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Confirmation callbacks needed not be registered with AVDTP
during A2DP initialization
Change-Id: I2cdf8c5a283775e49fa6e7e9404024e26d05a767
Signed-off-by: Piyush Itankar <piyush.t.itankar@intel.com>
This basically implements timer for connection and disconnection.
Conn timer will be started when dlc is initialized and stopped
when it is connected. Authentication if any, will be also included
in this timer.
Disc timer will be started during disconnect initiation.
Change-Id: Ia4b74e478fefa42db21aef528e623a24c72ddf7f
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Moves rfcomm_send_disc() and rfcomm_session_disconnect() to call it
while doing timer implementation.
Change-Id: I5805d31fb45181193385f055716c8518d68cc4a1
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Adds more descriptive comment to the code responsible for handling no
resolved UUID case.
Jira: ZEP-1112
Change-Id: I1af07949e19246d51bab9df05504a90f5fb22bb2
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
User may want to know when getting called user UUID callback handler
on what UUID the result data was retrieved from server.
Jira: ZEP-1112
Change-Id: Iabb2dbdf0f3cfdb24244e052f094c7549164b199
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
