This is the port of the legacy/kernel/test_pend test case to
the unified kernel
Jira: ZEP-932
Change-Id: I81762b45ff7000ff9f6079c674b46d233b2645de
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Also recommend dfu-util on Mac OS, as it's the recommended flashing
method for Arduino 101 and 96Boards Carbon.
Change-Id: I91d5a8323330ee31cc2165336e4a0a7fdd23dbcf
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Now that dfu-util is a supported flashing method, make it the
default flashing option for Carbon when used via 'make flash'.
Change-Id: I0d2fb9a8cbb4324ea77f1c94ca5df6f1a51e67f6
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Add DFUUTIL_DFUSE_ADDR to the list of dfu-util environment variables,
which can be used to flash DfuSe devices (e.g. STM32 based MCUs).
Change-Id: I39fdc338f7f034376ce50b648b06f39fee3169a7
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
This fixes an issue found on automated testing. If IUT had no credits
to send data, the TX request was not queued, because -EAGAIN error was
not returned to bt_l2cap_chan_send (which was responsible for queueing).
Scenario:
1. IUT was out of credits
2. Tester requested to send some data
3. Credits was given
4. No data was sent
Fixes: ZEP-1896
Change-Id: Ie9d0945d1e6b628cd978ede8105b37b838a61f1a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Cleanup controller's root makefile and add folder level
makefile to have better control over dependencies.
Also explicitly include folder paths in c files to clearly
depict the dependencies.
Change-id: Iac7b3a86eff11082111049ba48559c74f6c4d3fb
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Move the PDU related size definitions out of radio.h and
place it in pdu.h. This will remove hci's dependency on
radio.h.
Change-id: Idf9d7cdf7c60d74816ef2b093c4ae457df16e9a9
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Added conn-update command to btshell module to test
bt_conn_le_param_update Bluetooth API.
Change-id: I205df9ffc12a0ab062de5a779ab96bc91cbd9259
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Mark each PDU type explicitly instead of using BT_ATT_OP_CMD_FLAG for
this. For simple "error response or not" selection the command flag is
sufficient, but to prepare for support for enforcing both request and
indication flow control it's useful to easily look up the type of the
PDU.
Additionally, refactor the handler lookup to make the flow a bit more
streamlined.
Change-Id: I575848356934b6d636dcda8d10b7e7fde1095355
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Reordered the commands in btshell to represent the logical
order of use. Moved advertise and scan before connect
command.
Change-id: Id64509e39848109a6df7ddb1306b6bd221b65c40
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Move the uint8_t members together to save 4 bytes for each struct.
Change-Id: I522be86397c57fd062018e409b65835912c6e7bc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_conn_le_param_update returns -EBUSY when used in central
role if peer did not support LE connection parameter
request.
This commit allows a central role to use either LE
connection parameter request, if local controller supports
it, else use LE connection update.
Jira: ZEP-1773
Change-id: I72b9c77440459672fd50216a74ffcbd59c5f38f6
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Added checks for latency and timeout changes requested in
bt_conn_le_param_update, to decide if connection parameter
update is needed.
Change-id: I9de9f566158c5ade808ed356cb90b27186aa0243
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
There's no need to be opaque about this. Use the right type and let
the compiler catch errors for incorrect assignments.
Change-Id: If745354f514cbecfe6c0d845ebeaf3b93208b9b8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Only 1 TX buffer is sub-optimal for performance since the controller
would always have to wait for the host TX thread to give it another
buffer. Increase the value to 2 so the controller can keep
transmitting data without waiting for the host.
Change-Id: I4841a6c5010f294996d6fe0fe63260b848a6a437
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Updated controller code to use NULL keyword instead of
using 0 for pointers.
Change-id: I5ebff53dfeeba670fb7afe4740596b2662eb0334
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
There may be use cases where input and output is in big-endian rather
than little-endian. Introduce a native big-endian API to avoid
excessive byte order reversals in these cases.
Change-Id: Ia7b3e01bb0a07c4560b23f60c2f615ec614eb431
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are some use cases where all parameters are in big-endian. To
avoid excessive byte order reversals introduce a native big-endian
API.
Change-Id: I58fe9156c8819a3a43d715e70b6ba358bd2f844b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Do this in preparation of a purely big-endian API (all three
parameters as big-endian).
Change-Id: I815f74549caffd5ac387b5bb84e5851aa96639b9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This avoids overpopulating the high-level bluetooth.h
Change-Id: Icab8500be92003aa45d837ff111a8d93689865cc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
1. Reset the state when error occurs
2. This patch avoids checking for the AT_STATE_UNSOLICITED_CMD state
as the loop exits with possix error. So check for at->state
AT_STATE_START is sufficient for loop termination.
3. Fix different sign warning.
Change-Id: I80a1ca582112f1783690ac8a4125036bb706705f
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
This patch adds support to initiate audio connection from the stack.
< HCI Command: Setup Synchronous... (0x01|0x0028) plen 17 [hci0]
Handle: 256
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 7
Setting: 0x0060
Input Coding: Linear
Input Data Format: 2's complement
Input Sample Size: 16-bit
# of bits padding at MSB: 0
Air Coding Format: CVSD
Retransmission effort: Optimize for power consumption (0x01)
Packet type: 0x003e
HV2 may be used
HV3 may be used
EV3 may be used
EV4 may be used
EV5 may be used
Change-Id: I4f4c0788760c9bdaf75651825511ff6bcd06df59
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
This patch handles the SCO disconnection part also unref the connected
corresponding ACL conn.
Change-Id: Ic2de68560cfd7d847e6011578c4424e24800d2ac
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
This patch renames the 'conn' variable to 'acl' which is reference
to ACL connection for SCO connection.
Change-Id: I5f0a60bc5d80de08fa5b963cf545c71552909401
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Expose LE Encrypt helpers to applications. If software-
based controller is compiled-in, then controller's AES
hardware will be used by the exposed helper interface.
Change-id: I2bac9dfa5ccb3dd50447079affb52d920ae5bd81
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>.
Now that we have all the requested attributes of the service, form
the response packet and send it.
This also renames create_attrib_resp() to create_attrib_list() since
it is basically creating the list of attributes based on the filter.
> ACL Data RX: Handle 256 flags 0x02 dlen 21
Channel: 64 len 17 [PSM 1 mode 0] {chan 0}
SDP: Service Attribute Request (0x04) tid 28258 len 12
Record handle: 0x10000
Max attribute bytes: 4096
Attribute list: [len 5]
Sequence (6) with 3 bytes [8 extra bits] len 5
Unsigned Integer (1) with 2 bytes [0 extra bits] len 3
0x0004
Continuation state: 0
< ACL Data TX: Handle 256 flags 0x00 dlen 32
Channel: 64 len 28 [PSM 1 mode 0] {chan 0}
SDP: Service Attribute Response (0x05) tid 28258 len 23
Attribute bytes: 20
Attribute list: [len 17] {position 0}
Attribute: Protocol Descriptor List (0x0004) [len 2]
Sequence (6) with 3 bytes [8 extra bits] len 5
UUID (3) with 2 bytes [0 extra bits] len 3
L2CAP (0x0100)
Sequence (6) with 5 bytes [8 extra bits] len 7
UUID (3) with 2 bytes [0 extra bits] len 3
RFCOMM (0x0003)
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x05
Continuation state: 0
Change-Id: I54ba00f7700cbb72182dce745d61f5281f83437a
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Add proper logging for errors in the same go.
Change-Id: I8bd4fa8d5b143e51024496bfba0056525ad35964
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move crypto related interface provided by the
software-based Controller bt_rand into separate file,
crypto.c.
Change-id: I9998a43fe45799b479969ca195f324199418b8c2
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Use explicit path while including internal header files.
Change-id: Ide80eb23007574a7362850173ac227943bda21d5
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
The current hci_driver.c contained all the software Link Layer
initialization code. To decouple HCI from the actual LL, most of the
functionality that is actually part of the LL has been moved to the
ll_sw folder, opening the possibility for future hardware-based LL
implementations.
Change-Id: I1b54d655568a4ec02409da2f1a0addb4d64beed0
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since this presents a risk of public Bluetooth address duplication in
the wild by compiling once with a particular address and then flashing
the same image to multiple devices, a decision has been taken to remove
that config option and replace it later with another mechanism.
Change-Id: I068db25b2996c2409630554b1819b6adc48226cd
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
To present a common interface to both software and hardware Link Layers
the API in ll.h now lives in its own separate include/ folder.
Change-Id: I2b0ab0d11b47b9c35a5759bcc30f347e6c616648
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Declaring these as const lets the linker generate more optimal code.
Some extra care is needed with hci_ecc.c since it was overwriting the
send callback. Now the choice of send() call is done directly in the
bt_send() function
Change-Id: Iac74f5ee9bee097bbb34c11bd13d1d886700f5cc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Retrieves the record specified by the record handle, go over each
attribute in the record and check whether the attribute is there
in the list provided in the request.
Change-Id: I8f09e0fbb7811a20bb25dc0029cd7c79a9345c88
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
In preparation for future hardware implementations of the BLE
Link Layer, this patch introduces the BLUETOOTH_LL_SW
configuration option to specify that the default software
LL is to be built.
Change-Id: I8b9d5b5e0d2926d18f9e8c8f042a74326895bf95
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Handles the ServiceAttributeRequest, populates the attributes to be
searched in the record specified by the record handle.
Change-Id: I3b702eaf05615f795d32aa30dbfaf91f5b2ce560
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Rename all LL downstream API calls from radio_ to ll_ so that they
reflect the layer they are actually targeting. Additionally they have
been moved to ll.h so as to expose a proper interface.
Change-Id: I4fb3946597920c9fafaacb6d87d34d83d75e8f27
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove the H:4 packet type macros that were unused in this file.
Change-Id: If161ddbf2d3adb2871cadd76de0e6c3bb50a16db
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Report as Bluetooth 5.0 compliant controller as there are
no mandatory features.
Rename PDU types as per the changes in Bluetooth 5.0
Specification.
Change-id: I1363e054eafd37c2bdca0f69b2638c7edb785787
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Bluetooth device address is 48-bit, added Kconfig range
field to restrict input to 48-bit hexadecimal value.
Change-id: I650343eab5809535137e164e783c9dd4f3e2a6f2
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add Kconfig option to set the Controller's company id and
subversion number.
Change-id: I3508aba18bf0b79fd423c7b4142b6fc57eaf55d7
Signed-off-by: Matthias Ringwald <matthias@bluekitchen-gmbh.com>
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add a Controller event that indicates everytime
advertisement event has been transmitted on air.
Change-id: I4722488bbfeca987e66983faf5b26467407a89c9
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add ARG_UNUSED on rssi_ready local variable when the RSSI
feature is compiled out.
Change-id: I04f8f11cbc3530f7b85ffa72f27373e213b6e35e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Now that we have all the records which has the uuids in the
service serach pattern, take the handle of each of those records,
prepare and send the service search response.
> ACL data: handle 256 flags 0x02 dlen 17
L2CAP(d): cid 0x0040 len 13 [psm 1]
SDP SS Req: tid 0x6b6f len 0x8
pat uuid-16 0x0100 (L2CAP)
max 256
cont 00
< ACL data: handle 256 flags 0x00 dlen 26
L2CAP(d): cid 0x0040 len 22 [psm 1]
SDP SS Rsp: tid 0x6b6f len 0x11
count 3
handles 0x10000 0x10001 0x10002
cont 00
Change-Id: I85ec8ee384d0bf8090265577ec3ef805e75d4766
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
