Use UNALIGNED_PUT() to store the MSS value into network packet
because the memory location cannot be guaranteed to be properly
aligned.
Change-Id: I77fd7a70ef45eedb657cac29457b0239b0a1d4c2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
TC_START was missing from some tests. For this reason automated testing
parsing wasn't unified for all tests. This patch fixes the issue and adds
TC_START to tests where it was missing.
Change-Id: I7e27a3fd8eaef9c3d0b0e0aeba9bca5b97eb0c58
Signed-off-by: Milosz Wasilewski <milosz.wasilewski@linaro.org>
This test takes a bit longe than specified and fails on a daily basis
due to the low timeout specified.
Change-Id: Id774c35cb1b0d0dcc5455e4121a8e9e1612baafd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit 1c06065941.
Breaks cc3200_launchxl really bad:
CC drivers/serial/uart_cc32xx.o
/projects/zephyr4/drivers/serial/uart_cc32xx.c:39:18: error: ‘TI_CC32XX_UART_4000C000_BASE_ADDRESS’ undeclared here (not in a function)
.base = (void *)TI_CC32XX_UART_4000C000_BASE_ADDRESS,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/projects/zephyr4/drivers/serial/uart_cc32xx.c: In function ‘uart_cc32xx_init’:
/projects/zephyr4/drivers/serial/uart_cc32xx.c:65:5: error: ‘TI_CC32XX_UART_4000C000_BAUD_RATE’ undeclared (first use in this function)
TI_CC32XX_UART_4000C000_BAUD_RATE,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Change-Id: If46c239bc8d6b4296494f638e900f6044a92ce26
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch fixes an issue with mixed case node names. Node names
containing upper case letters were causing key match errors during
post processing. This patch maintains the case of the node names.
Change-Id: I153a186fa09dcf958c9de55b578dbc63e615a076
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Tinycrypt 0.2.6 fixed the issue with the definition of 'bool'.
Issue: ZEP-1722
Change-Id: Ie470e25dfe02a58d9c3f2324cab85bc02f574b51
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
_power_save_idle_exit() was removed long ago. All arches now just
call _sys_power_save_idle_exit() if PM is enabled.
Change-Id: I9cce3eecc8cbf1cbce15a355be420e747fb978de
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A patch moved the specification of debug flags to a
KBUILD_CFLAGS_OPTIMIZE, but this Makefile wasn't updated.
Change-Id: Ic0d23f95609798473298cda4c044981edabb3ed5
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
it covers the story "Port AES-CMAC-PRF-128 [RFC 4615]
encryption library for Thread support"
ZEP-734
Change-Id: I6213309b51da435060c3e3cfadde67e21a927b2b
Signed-off-by: ethan gao <ethan.gao@intel.com>
Deleted the instance of app_kernel in tests/legacy/benchmark.
JIRA: ZEP-1980
Change-Id: I5a6e073d9b0c870be0cc7d8ae5bb352b11d7f97e
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
When running with qemu often times the developer want to enable all
sorts of debugs which end up not working with only 192K.
Change-Id: I8d784618b9a0d911944f831a4058b34abc0c3e35
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The filter expects CONFIG_, otherwise it is noop
Change-Id: I2b0a02b6450287a090b69a12324fe7f7cf494999
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Filter was wrong and sample was not being built on any boards. Exclude
platforms that do not support interrupt based UART drivers.
Jira: ZEP-2014
Change-Id: I84a690e7c93fae52335434830b83086019cfd00d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This code is non-functional and is a left over from an old version of
the kernel that does not work and is covered through other new features
in the kernel, for example object tracing.
Jira: ZEP-2013
Change-Id: Id12ad09e2d06186b53cd2f0dd030ac6d37d1229f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
CONFIG_* usually come from Kconfig, rename variables that are locally
defined to avoid confusion about where they are set.
Change-Id: I402713e6f852907e75be4bc2b916a7d15dd5649c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
CONFIG_* usually come from Kconfig, rename variables that are locally
defined to avoid confusion about where they are set.
Change-Id: I83b8459913c5deb68dc1b9f5386b8934363a6d1f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The CP context area was before on the bottom of the stack just
after the thread descriptor. Now it is moved inside the thread
descriptor to support some kind of memory protection.
Change-Id: Id3ebeaecfd9c2475899713fdc8da583a1f9121f9
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
This fixes regression introduced by
87f2f7afec.
Change-Id: I4a1177ad42c7bb20fe66f8927cd00a30236152af
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
That option was not defined and the sensor does not have this feature,
probably was part of some copy/paste mistake.
Change-Id: Ib24d1f85cf90648b01fa81b285a1ec01fe28c545
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If the connection process fails the user may still need to do
bt_conn_get_info() in its connected callback, so this needs to give a
meaningful value for the remote address. Start off with the one that
was given to bt_conn_create_le().
Jira: ZEP-2005
Change-Id: I4e9a033dec7c55fa549f5b6746c3bd81c0ccade5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This replaces custom made list manipulation with sys_slist_t which makes
the code more readable.
Change-Id: I9ee024ad83da3e28f2ecab74b001bf0e795fe489
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use #if defined(...) constructs while using conditional
compilations of advanced event preparation and advanced
scheduling implementations.
Change-id: I728c76d0e7dbbfa378e8978b726ec404d9e55a72
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Move the scan duplicate filter length option and group it along
with rx/tx buffer size Kconfig options.
Change-id: I3df07e667029c7d2571270db442ecb7241a417c2
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
The bt_conn_set_state() function will not notify the connected
callback of the connection error if conn->err isn't properly set.
Jira: ZEP-2005
Change-Id: Idc30e736f4d8ba00156bf5c0e37dcccdb151742f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The BR/EDR configuration doesn't fit e.g. the Arduino 101 anymore.
Limit it to Qemu for the time being, which is anyway the primary
target where the functionality is being tested.
Change-Id: I9a34c82157d56079e43acabe29eeadd6d99e03fe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
tests/kernel/context:
added test point to cover k_cpu_atomic_idle.
Jira: ZEP-1242
Change-Id: Id09c89fd367d527ea1087e6eb2bdba29a338ceaf
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
The following warning occurs when !SYS_LOG_INF due to the fact
that these variables are only used for information purposes.
When logging is <INFO then the variables aren't utilised at all.
To fix this we're removing the variables completely and using
the direct calls from within the information prints instead.
drivers/dma/dma_stm32f4x.c: In function 'dma_stm32_dump_reg':
drivers/dma/dma_stm32f4x.c:196:11: warning: unused variable 'sfcr' [-Wunused-variable]
uint32_t sfcr = dma_stm32_read(ddata, DMA_STM32_SFCR(id));
^
drivers/dma/dma_stm32f4x.c:195:11: warning: unused variable 'sm1ar' [-Wunused-variable]
uint32_t sm1ar = dma_stm32_read(ddata, DMA_STM32_SM1AR(id));
^
drivers/dma/dma_stm32f4x.c:194:11: warning: unused variable 'sm0ar' [-Wunused-variable]
uint32_t sm0ar = dma_stm32_read(ddata, DMA_STM32_SM0AR(id));
^
drivers/dma/dma_stm32f4x.c:193:11: warning: unused variable 'spar' [-Wunused-variable]
uint32_t spar = dma_stm32_read(ddata, DMA_STM32_SPAR(id));
^
drivers/dma/dma_stm32f4x.c:192:11: warning: unused variable 'ndtr' [-Wunused-variable]
uint32_t ndtr = dma_stm32_read(ddata, DMA_STM32_SNDTR(id));
^
drivers/dma/dma_stm32f4x.c:191:11: warning: unused variable 'scr' [-Wunused-variable]
uint32_t scr = dma_stm32_read(ddata, DMA_STM32_SCR(id));
Change-Id: I91a0373ef6c9afa8a342181c0ab24bd58743300d
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Coverity points out that uart_irq_update() return value
should be checked.
Coverity-CID: 166776
Change-Id: I3a754dae9e8f1563f4879e2fadfd89621785de8f
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
tests/kernel/common:
added test case to cover kernel clocks service.
https://www.zephyrproject.org/doc/kernel/timing/clocks.html
Jira: ZEP-1242
Change-Id: I40a06dd9d4dcb1ed24d488088eb2e456740c3bad
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
This is intended as a temporary fix for ZEP-1882.
Investigation for this bug has shown that the current SDK 0.9 compiler
for ARC generates incorrect code under -Os optimization level.
Kuo-Lang Tseng found out that SDK 0.8.2 does not have this issue, and
that lowering optimization level to -O2 fixes the issue with SDK 0.9.
Juro Bystricky is working on an updated SDK with ARC GCC 6.3.0, but
there are still problems with it, so he also suggested to use -O2 in
the meantime.
Instead of blindly setting -O2 for all toolchains and architectures,
let Makefile.toolchain.zephyr make the decision for ARC and 0.9 only.
Tested with hello_world, CONFIG_ADC=y and BOARD=arduino_101_sss.
Jira: ZEP-1882
Change-Id: Ifde2e3950c9d93eed8982149805acfda9d13a94f
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
Initial assumption with Arduino 101 was that the "alternate setting
name of the DFU interface" would be simple enough to be used as the
grep pattern when attempting to find the board in DFU mode.
However, for boards such as the 96Boards Carbon, this name includes
grep meta-characters, so the DFUUTIL_ALT environment variable is
provided as a numeric value, instead of the previously expected name
string.
In order to avoid false positives, we now check whether DFUUTIL_ALT
is a numeric value, and the grep pattern is adjusted accordingly to
search for either "alt=" or "name=".
Also take into account that the name might contain spaces.
Change-Id: I81351d03bd727b35093fd1280e2b8b6904f3c89b
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
CONFIG_DEBUG_INFO was disabled for IAMCU targets. As per Jira update forked
arch/code is gone. So it should not block enabling DEBUG_INFO for IAMCU.
Currently CONFIG_DEBUG_INFO depends on (x86 = y && !X86_IAMCU)
CONFIG_DEBUG_INFO can not be set for IAMCU. this patch removes dependency.
Jira: ZEP-601
Change-Id: Ib5635096f83f7b931c277b667a55c6d54f8e946a
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
