The files for the Arduino Due needed to be updated to use the new
configuration when the SoC moved from the atmel_sam3 directory to
the atmel_sam/sam3x directory.
Jira: ZEP-2067
Signed-off-by: Justin Watson <jwatson5@gmail.com>
Sys log already break a line after each line, by default, so removing
the '\n' on log messages.
Enabling support for sys log colors.
Change-Id: Ica3a601aba0bbbd2d9438b41fb7bca0aad9c05f4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Don't return without freeing the session when relevant.
Change-Id: I9e5903791f8eb54026c4bb2ddda9f1fe9f3f7bb3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I08c682bfc0b80dfa88de859e90a011bcd2db2762
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This sensor is supported already with many features, using it to test
SPI and I2C is an overkill. For both basic I2C and SPI samples we have
the FRAM samples supporting both IOs.
Change-Id: I794e584bd540d5fe6353fa3370aac0f1d6d105dc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix doxygen comment typos used to generate API docs
Change-Id: I248d53000d8e57b902b9a18fdcfc9e995142a8b3
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Change to use the device config name defined by driver's Kconfig
for device binding, instead of hard-coding it which is not
portable.
Jira: ZEP-1764
Change-Id: I61ed7cfd97e20faad8f1e98dacef9384e8fefc73
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Change to use the device name defined by driver's Kconfig for
device binding, instead of hard-coding it which is not portable.
Jira: ZEP-1764
Change-Id: I0dc9aa2cdf426af71f1ed6dcef1ec7cec19f4c3e
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Change to use the device config name defined by driver's Kconfig
for device binding, instead of hard-coding it which is not
portable.
Jira: ZEP-1764
Change-Id: I7af234ada73302eb062340740df2fc7a8539150d
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
This reverts commit 81f85f4e4b.
Need a better solution for this, the patch itself does not solve any problem
and fails on many platforms that do not have I2C enabled.
Change-Id: I060e3d7a9992db8a1ece6da5e8d3a521f4052395
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the config name defined by the driver Kconfig in device
binding calls as that is safer because device name can change and
the app does not need to change.
Jira: ZEP-1764
Change-Id: I5a3e16e10f7700ec12edbd07603808cd32f15755
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Instead of using a hard-coded device name in the device binding
call, use the config name defined by the driver Kconfig as that
is safer and the app does not need to change when the device name
is changed.
Jira: ZEP-1764
Change-Id: I99efc4bcae0d1acae70f7820f69dfffbe17510a6
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Some files made it through review process with full license header.
Change-Id: I2722b127c40b4b19500042c12e4fde85a165bae9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
A sample application to illustrate the usage of crypto APIs.
This shows the usage of AES - CTR, CBC and CCM based encryption
and decryption.
origin: original
Change-Id: I17e4d966a70169b71a754c9cdc3f713a5d0c3ac0
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Remove CONFIG_GPIO from the prj config file. It is redundant.
Change-Id: Ife4301e7ce480a9002cadcddfd5eaa569900a391
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch moves pwm driver samples to samples/basic and also convert
documentation of PWM samples to RST.
Jira: ZEP-1536
Change-Id: Ib2b3ff8b1722a26618e9a6fe416e2138d82ca28b
Signed-off-by: Punit Vara <punitvara@gmail.com>
Correct some syntax error and update some comments. There is
no functionality change.
Change-Id: I86c922c8aabcc4464b86f33ad7edf6056b1d765c
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The gpio device driver name for the sensor sub-system was
renamed to GPIO_SS_x from GPIO_x recently. Let's use the
new gpio driver name for the sensor sub-system in the app.
Change-Id: Ie06b072d31e23e74c3ac41a4590845b24a020ed1
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Remove two configuration parameters related to gpio used as spi
chip slect from prj config file. since they are already in
arduino 101 board config.
Change-Id: Iebaab605d8a6394e27c70ebbf4bac37a24665522
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This patch adds Beetle to the Watchdog test case.
Jira: ZEP-1300
Change-Id: I371ca2f89aaec8e07f45cfa04fc2618d009cf487
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Exiting from the test case when the i2c device is not found, this
to avoid a null pointer dereference
This issue was reported by Coverity
Coverity-CID: 151982
Change-Id: Ib11224ef2a78170f6e4d20545f645b4f2ea4a181
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Exiting from the test case when the gpio device is not found, this
to avoid a null pointer dereference.
This issue was reported by Coverity
Coverity-CID: 151980
Change-Id: I7aafbc993674c8874a16b5a9213108f5769114ec
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
If an i2c transaction fails the sample will hang the program into
an infinite circle.
This commit will remove the infinite circle and report back the
error code from the i2c transaction.
Change-Id: I38d350a805af6bec43f2fa8d4af6ce4e3cc27662
Coverity-CID: 151991
Coverity-CID: 151992
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
If the gpio or spi devices are not found there is no
need to keep the device busy in a loop for this particular
sample.
Since it is not possible to continue execution it is better
to simply end the application.
Change-Id: Ie25ea970a479db2a2f339ca2b37f88541a45ef97
Coverity-CID: 151973
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Exiting from the test case when the gpio device is not found, this
to avoid a null pointer dereference
This issue was reported by Coverity
Coverity-CID: 151980
Change-Id: I44f13131d44c7c093781e1f11f8481e7ef8175c9
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Exiting from the test case when the gpio device is not found, this
to avoid a null pointer dereference
This issue was reported by Coverity
Coverity-CID: 151982
Change-Id: Ifaed47b2b48359dacfdb3111ca2895d5912779e6
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
The data structure member being used is character array,
dereferencig this array gives **char instead of the expected
*char type.
This issue was reported by Coverity
Coverity-CID: 152030
Coverity-CID: 152033
Change-Id: Ied67e4b2d47017e6ad5e40b9b6fca1b496c483ed
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Add a sample app to demonstrate the usage of Fujitsu SPI
FRAM.
It uses SPI 1 on quark spi controller and gpio 20 as CS.
Change-Id: I30c83bdd8312ca0cab7a62e397c0cb4ade0821cb
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Remove those from Makefiles and testcase.ini, we now support unified kernel
only and sanitycheck script now knows how to deal with this.
Change-Id: I853ebcadfa7b56a4de5737d95f2ba096babb2e13
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove this sample app. The component is no longer on the
board (quark_se_c1000_devboard).
Change-Id: I342616781e6f343cfc66b89cbdf85de5844f6f4a
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Use unified kernel for lcd hd44780 app.
Some delays were rounded up to multiples of millisecond, since
k_sleep only takes multiples of millisecond. Based on the lcd
datasheet, this should not cause any problem.
updated some comments based on what the code is actually doing.
Change-Id: I533c822dbaea0246dcd62a76cc23ce0d8edd4630
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Use unified kernel for the watchdog sample app.
Change-Id: I6b53f066033a451c3aafe7f3a528c7f3461ae305
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Add a new pwm app (rgb led) using the new API.
Following the recent pwm RFC, all existing APIs will
be deprecated. Two new APIs will be added. The changes
for the new APIs and the required driver function have
been posted.
To demonstrate the usage of the new PWM APIs, this app
to drive a rgb led is added. It will use the new API
pwm_pin_set_usec().
This app will be located in a new sub directory.
Jira: ZEP-745 ZEP-1029
Origin: Original
Change-Id: If8e5d8ab22dcf8b7cf3665e38949715c61ca9c03
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add a new pwm app (motor control) using the new API.
Following the recent pwm RFC, all existing APIs will
be deprecated. Two new APIs will be added. The changes
for the new APIs and the required driver function have
been posted.
To demonstrate the usage of the new PWM APIs, this app
to drive a servo motor is added. It will use the new
API pwm_pin_set_usec().
This app will be located in a new sub directory.
Jira: ZEP-745 ZEP-1029
Origin: Original
Change-Id: I65857848e64d0478c4e12d1317b2089cdd1ecf5c
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add a new pwm app (fade led) using the new API.
Following the recent pwm RFC, all existing APIs will
be deprecated. Two new APIs will be added. The changes
for the new APIs and the required driver function have
been posted.
To demonstrate the usage of the new PWM APIs, this app
to fade led is added. It will use the new API pwm_pin_
set_usec().
This app will be located in a new sub directory.
Jira: ZEP-745 ZEP-1029
Change-Id: I8d929a21f7de88307c47b52f98f131e00b2fdbe7
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Replace existing APIs which will be deprecated by
the new API in this app and rename the app.
Following the recent pwm RFC, all existing APIs will
be deprecated. Two new APIs will be added. The changes
for the new APIs and the required driver function have
been posted.
Since the two existing APIs (pwm_pin_set_period and
pwm_pin_set_values) used by this app will be deprecated,
this change is to replace them with the new API
pwm_pin_set_usec().
To demonstrate the usage of the new PWM APIs, more apps
will be added. All the apps will be located in their own
sub directories. The existing app is actually one to
blink LED. So, it is moved the "blink_led" sub directory.
Jira: ZEP-745 ZEP-1029
Change-Id: Icc3fbf6b6c25db9590c63bc08f40ec62c87c0f16
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This sample justs outputs the SPI FLASH IDs.
I think we should improve this to also output done, otherwise
it looks like its stuck or something.
Change-Id: I18d5919c1e25bb5aaa9ceba53793cc14b15f3c77
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
These platforms don't have the hardware and will always fail.
Change-Id: I637d39f003bd1d507da0b5bb6fa12118040fcd63
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
When the sample fails, it's difficult to identify whether it failed
during the configuration or transfer stage. Provide a little more
information which will allude to the nature of the failure.
Change-Id: I5272ce73f56b0e51c8439d5510e512b616665705
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This board is not being used or tested and does not actually
run on any hardware, remove it in favor of well supported boards
for this CPU.
Jira: ZEP-850
Change-Id: I01c825c7eb44d6c321f2ffb88e8899da528921dc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board is not being used or tested and does not actually
run on any hardware, remove it in favor of well supported boards
for this CPU.
Jira: ZEP-850
Change-Id: Ied681b6059ad74f9d019054292c919a9f938e7d3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In many cases there is no need to define a macro for printing to
the console, just use the correct variant directly.
Jira: ZEP-240
Change-Id: I9952deda4bfc60424f01fca2443d037562d13d0d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove this app, since the sensor is not on the
board any more.
Jira: ZEP-763
Change-Id: I931acfe9f01b817bc0b24a4e0745bf759e53da90
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Don't try to detect the UART device manually, the list is missing a
bunch of boards (the Quark SE sensor subsystem variant, and both
Arduino 101 halves). There's a config variable for that.
Change-Id: I903e52dcb6025e5da824faadb5e4bc59221fa210
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This output is going to a terminal device, not a Unix tty descriptor
which will cook the output for us. Newline moves the cursor down.
Carriage return moves it to the start of a line. We need both.
Change-Id: If93d1a85d16cea93b4788fa55e694a7b77055bfe
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
- Set default board to Quark SE Debvboard
Jira: ZEP-690, ZEP-760, ZEP-782
Change-Id: I7f7cc45b527a116f88cf45796e46b429ae6f0060
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change the api argument format following the API
argument definition change in the driver. Some
definitions of CONSTANTs were changed accordingly.
Correct some comment error.
Jira: ZEP-642
Change-Id: I1b34640aa70f1597076e035e2b3b576d8337129a
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Remove generic PRINT macros from button samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: Iae35d69a6a8473afdc1003ed629a21447a6f9a4a
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from aio samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: If50d8de2256f38902b5a4b68c57553cb5e8b8a94
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from pci samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I5a556637c441b1a4117eb75463d66f7127355a59
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from flash samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I2a9b69e9eb82bbdb03af563bdc49c7ed51681580
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from spi samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: Ie377c7bba8b3cf2de05976cef5c4d814fa62b647
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from sensor samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I474efcd1daf8e621acd50d88b3a9662b8cd2b516
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
