Initially this sample was intended to be very simple and schematic,
but as this sample going to become a base for stream API conversion,
time to handle all the edge conditions.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Initially this sample was intended to be very simple and schematic,
but as this sample going to become a base for stream API conversion,
time to handle all the edge conditions.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
mbedTLS log level is obviously a mbedTLS config setting. It makes
sense to have it defined in mbedTLS Kconfig, and different parts
of Zephyr to reuse as needed (e.g. net-app vs upcoming TLS wrapper
for sockets).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Move the generated files into include/generated so they live with the
build and not in the zephyr source tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Create a net sample to setup a multi-node RPL mesh network using QMEU.
To enable this, it was necessary implement a hw filter on IEEE 802.15.4
UART Pipe driver and create a QEMU pipe management on cmake.
This sample use a tool developed on zephyr net-tools repository called
virtual-hub.
Signed-off-by: Pedro Martucci <pedropaulomartucci@gmail.com>
The Host header is even mandatory in HTTP 1.1, and indeed without
it, many virtual hosting setups don't work (which are many), so to
be faithful to what README says: "You can edit the source code to
issue a request to any other site on the Internet", let's
complicate the sample by including it.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
When testing whether the CTR mode decrypted the payload properly, a
comparison of `decrypt.out_buf` with the known plain text `plaintext`
is performed, but the buffer comparison that is printed uses
`plaintext` and `encrypt.out_buf` instead.
Coverity-CID: 181847
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This sample downloads a more or less big file (~6MB as preconfigured)
over HTTP and checks its hash for integrity. It also repeat such a
download indefinitely, counting total number of bytes transferred.
This is thus a kind of traffic load testing sample. (Ported to C
from MicroPython original).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This sample (which should eventually become a proper test) suite
builds from simple applications of the new primitives to a full
context switch test and interrupt handling suite (based on the
CPU-internal CCOMPARE2 timer).
It's been extraordinarily useful finding regressing as the asm2 code
gets modified and should probably stick around as long as possible.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The previous default, "config-threadnet.h", is more or less arbitrary
choice made in a commit 312def2c78 1.5 years ago. In particular,
it's not related to Thread support in Zephyr per se (there was no
such support at that time).
It doesn't make sense to have a default intended for a particular,
not widely used (yet) protocol. Instead, the default should work
out of the box with a contemporary widely deployed arrays of TLS
servers, which are HTTPS server. config-mini-tls1_2.h works with
https://google.com, and by extension, with many other servers on
the Internet.
So, have that as the default, and let applications with special
needs to override that to what they need.
Addresses: #6132
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
bt_gatt_discover_params parameter shall remain valid as long as the
procedure is in place.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Convert the mesh code to use the new net_buf_siple APIs. This has the
benefit of saving 4 bytes off the stack due to the not needed pointer.
Also update the publication context helpers to map to the new
net_buf_simple API in an intuitive way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Application should normally declare a bt_uuid with proper type and then
use bt_uuid_cmp.
Fixes#5162
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Two docs listed in the Samples an Demos TOC had the same title displayed
in the board-specific samples section, "Power Management Demo". Give
both sample docs a more specific title.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
With 323e8cf069 applied and printf() working out of the box,
CONFIG_NET_BUF_LOG=y workarounds can be removed from configs of
all samples.
Also, print an intro message at the start of each server sample,
to give a user hint that the app didn't just hang and what to do
next. (The port waiting for connection is printed. We can't (easily)
print host address, because the samples should run on both Zephyr
and POSIX systems, and finding out local host address would require
hairy #ifdef's undermining the purpose of these samples (that is,
showing that the *same* code can be used on both types of systems)).
Fixes: #5379
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Redesign of the net_buf_simple and net_buf structs, where the data
payload portion is split to a separately allocated chunk of memory. In
practice this means that buf->__buf becomes a pointer from having just
been a marker (empty array) for where the payload begins right after
the meta-data.
Fixes#3283
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The net_buf unit tests were doing some pretty hacky stuff with
defining a dummy _net_buf_pool_list variable to fulfil the linker
magic that happens with a real build. Until now the code got lucky in
that the simple net_buf_alloc() tests didn't depend on
_net_buf_pool_list being valid, however with the coming redesign even
net_buf_alloc will require proper setup of this.
Since the unit tests were extremely minimal, and not testing anything
beyond what tests/net/buf already tests, just remove them for now.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With current value of IPV6 Multicast address, IPV6 mcast bind
does not succeed and IPSP use case could not work.
Change use case multicast address to match IPV6 address and
enable binding
fixes: #6050
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Replace seldom occurrences of FLASH_DRIVER_NAME by equivalent
and commonly used FLASH_DEV_NAME.
Fixes#5919.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add sample application for AMS CCS811 digital gas sensor driver.
This application fetches Co2, VOC, Voltage and Current readings
from the sensor and prints it on serial console continuously.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Make it easy to override HTTP host/port/path. Print URL which we
request and make few other adjustment to the output for clarity.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
SENSOR_CHAN_DISTANCE is now in meters. Print value in meters, as
double, this requires printf() and CONFIG_STDOUT_CONSOLE. This is
similar to how other sensor samples have it.
Fixes: #5693
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Based on the discussion in #5693, the reason why humidity was defined
in milli-percent was likely following Linux which defines it as such
in its sensor subsystem:
http://elixir.free-electrons.com/linux/latest/source/Documentation/ABI/testing/sysfs-bus-iio#L263
However, Linux defines temperature in milli-degrees either, but
Zephyr uses degrees (similarly for most other quantities). Typical
sensor resolution/precision for humidity is also on the order of 1%.
One of the existing drivers, th02.c, already returned values in
percents, and few apps showed it without conversion and/or units,
leading to confusing output to user like "54500".
So, switching units to percents, and update all the drivers and
sample apps.
For few drivers, there was also optimized conversion arithmetics
to avoid u64_t operations. (There're probably more places to
optimize it, and temperature conversion could use such optimization
too, but that's left for another patch.)
Fixes: #5693
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The expected order for heading levels in our ReST documents is # for H1,
* for H2, = for H3, and - for H4. Some documents snuck in without
following this guideline.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The hts221 sensor driver was implicitly made dependent upon the
disco_l475_iot1 board when it was converted to dts, so build the
associated sample only for this board. This issue was encountered when
adding sensor dts support to nxp boards, which don't have hts221.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
A few lines earlier the code bails out in case len is 0. Checking for
buf->len < 1 is the same as checking for buf->len == 0. Since len is
guaranteed to be > 0 here the check len > buf->len implicitly checks
for buf->len == 0, i.e. the second test can be removed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add samples config for nRF52840 with OpenThread
for echo_client and echo_server.
Add OpenThread to CI for echo_client and echo_server on nRF52840
Signed-off-by: Kamil Sroka <kamil.sroka@nordicsemi.no>
Convert NXP k6x and kw2xd flash driver to use device tree to get the
flash controller name from device tree. We introduce yaml bindings for
the "nxp,kinetis-ftfe" and "nxp,kinetis-ftfl" devices.
Fixes: #5788
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Applies to #4008 and #5159 for this board. Problem is that the
button interrupt callback was only firing once. Solution is to
set the pin pull up flag to GPIO_PUD_PULL_UP.
Signed-off-by: Anders Pitman <tapitman11@gmail.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a simple UDP server application that will receive UDP data
and print various statistics like number of packets received and
dropped, amount of bytes received, and how many packets / sec
we were able to receive.
Currently the sample only provides a config file for FRDM-K64F board.
Note that this sample should not be run in QEMU as the performance
is very bad there because of SLIP link between Linux host and QEMU.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The GPIO unit on the SAM0 is called 'PORT' which conflicts with the
name used in this sample. Rename to LED_PORT instead.
Signed-off-by: Michael Hope <mlhx@google.com>
We want to move to use a common FLASH_DEV_NAME across the various flash
drivers. So samples, tests, or other code can be a bit more generic. So
replace CONFIG_SOC_FLASH_NRF5_DEV_NAME with FLASH_DEV_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Those are added by sanitycheck, no need to have them enabled in the
project by default.
CONFIG_DEBUG is causing issues on qemu_nios2, see #5743.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The demo can be configured to use different object types for its
synchronization, so test all of them.
The demo can also be configured to work with static objects or dynamic
objects, byt default the demo uses dynamic objects, add a test for
static objects.
Also, the demo can be configured to work with threads of the same
priority or not, so enable both options for testing
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Michael Hope
