This is in preparation for adding support to confirm incoming pairing
requests. smp_pairing_req is now more similar to smp_pairing_rsp making
code easier to follow.
Change-Id: Ie5a77ae5092b7bbf76a482d0bd49e022c4d19d70
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Parse include function intention is to return last parsed included
service handle. Next discovery iteration of included services should be
started from last found included service handle instead of end handle
from included handle value (which contains attribute handle of included
service declaration and the end group handle, BLUETOOTH SPECIFICATION
Version 4.2 [Vol 3, Part G], 4.5.1).
Change-Id: I73fe4027cb616242e838ea54c61b7780f1838e52
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
If on_nble_gattc_read_rsp returns an error, this error shall be
passed to the application to let know that Read Request/Read Blob Request
was aborted due to ATT error received.
Change-Id: I0efe26ec90fe27a1ab3c791e555ebe682927ab57
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The Read Response only contains a Characteristic Value that is less
than or equal to (ATT_MTU – 1) octets in length so, condition
(length < bt_att_get_mtu(conn)) is always true, and the full
Characteristic Value will not be read.
Change-Id: Ib18fbedf277c880dc5cf0ce21fd7d550d12a64ef
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Disable reception and the oscillator as well when stopping. Revert
when starting.
Change-Id: I2a61066602267ac61e691ec9c20eb243de6fa076
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This prevents false packets to get accepted/generated into RX fifo.
Also, this will make AUTOACK working properly, when enabled. For some
reasons FRMFILT1 and SRCMATCH need to get their reset values written at
initialization, or then hw filtering won't work. This behavior is not
documented as it seems.
Change-Id: Ic0fe664dbc3b17d85d794c12b77bdbaafeb601f5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
For hw filtering and autoack to work, all the information should be
properly set in the chip.
That's a fix for the legacy radio/net API. From original code, these
were set from the application which is bad. But setting it from the
driver is not any better. ieee802154 and net stack should know what to
do, that will be fixed in the future.
Change-Id: I1688223e9488d10a423e788eb88ba1e251cb3f88
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It will not build without it. Generalize it then.
Change-Id: I334586f629de1f057e654a13a1c705cd559b44d8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Changed conf.py to use env var in the version of documentation.
CI can take advantage of this to name documentation using
tag version from git.
Change-Id: If59f800ccd37648a9c0dab6c948b13166a7f4aed
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Slope threshold attribute values should be received in m/s^2 instead
of Gs, since accel channels return data in m/s^2.
Change-Id: I0669345ff8af8559e47895bca8225e15d2576a06
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Use the SENSOR_G constant from sensor.h in all accelerometer
drivers, instead of having the constant redefined in each
driver header file.
Since GRAVITY_CONST was measured in mili-m/s^2 and SENSOR_G
is measured in micro-m/s^2, some changes to the calculation
of the acceleration data were added.
Change-Id: Ia323dfc46bee00035e24b37e1b7fbc886dfbe029
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Edited the microkernel API sections to get the proper linakage.
Change-Id: I1bc95c6e21ed996c4c5d72188c5f018038e3e958
Signed-off-by: Gerardo Aceves <gerardo.aceves@intel.com>
If the driver fails initializations, do not set the driver_api.
This follows the idea that device_get_binding() will not return
a reference to the driver instance when driver init fails.
Change-Id: Iff56b4150658a76567928b1fd166bde5d2848d52
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
- Put everything in one page and simplify workflow.
- Fix indent and layout
Change-Id: Ifd9d11531c9b906324cf87cf401cbce416cc01a4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Integrate the notes into the actual steps, notes are usually understood
as optional and disturb the actual flow.
Change-Id: If3168581ca130bd506bc44c353acc082dfa003fd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Merge documents and improve structure. Avoid too many jumps to get
to the information and avoid single paragraph pages.
Change-Id: Ifed4fa90d1105022bfe87e6d078845938e13bd3a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add sensors and networking into the new section and seperate
those from the kernel documentation.
Change-Id: I585845c3ba09173ced7caa0b7fbc1f1a81a26f96
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Put all device drivers and device model documentation into one
section.
Change-Id: Iba6a50796b02b7f9234c23dca706be62fd7b4259
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Because the random number generator is very dumb at the moment,
the generated MAC address has always last byte set to 0.
The MAC address is used when generating IPv6 address.
In order to avoid IPv6 address collision, swap the last four
bytes of the MAC address so that the most random data is
at the end of the MAC.
Change-Id: I96c03654359e32f407bab3b29be0e3b08ee91bd7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
On each net_receive() call with different destination and/or port,
µIP stack consumes a uip_udp_conns[UIP_UDP_CONNS] entry.
As net_context_put() doesn't free it up, Zephyr applications can very
quickly reach the point where it can no more create new UDP connection
(default UIP_UDP_CONNS value is 10).
This patch is both IPv4 and IPv6 compliant.
It modifies net_context_put() so that it frees up such entries if
a UDP connection is registered for the context provided as argument.
Change-Id: I9abe686c81368231d4443fc53da9038761a1787d
Signed-off-by: Jeremie GARCIA <jeremie.garcia@intel.com>
() The test names are getting longer so adds more padding.
() Aligns the numerical size numbers for easier visual
comparison when scrolling in shell.
Change-Id: Id218a641e9d5dffb77bf813ffbd828c48d14020f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Some boards require a newer version of openocd, this will
allow overriding the default version that comes with the SDK.
Change-Id: I70113182c3a2c8610e3b36542c6057ff3f0df547
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The device_get_binding() no longer returns pointers
to device struct when driver_api is NULL. Therefore,
there is no need to check for driver_api being NULL
in the serial driver wrapper functions.
Change-Id: I018a409324d7c1ae83c699a3ebf30f2f2abfb3b3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes the behavior of device_get_binding() so that
it returns NULL if driver_api is not set. This provides
a way for driver to state that it has not been initialized
properly, and prevents app from using it since no reference
to the device struct will be returned.
This implements the idea specified in [1]. The idea is to
reuse an existing resource by piggy-backing onto driver_api,
thus avoiding an extra "device state" variable in the device
struct. This differs from the code specified in the mailing
list by checking driver_api for NULL first. This avoids
the unnecessary strcmp() if driver_api is NULL.
[1] https://lists.zephyrproject.org/archives/list/devel@lists.zephyrproject.org/message/MZB5PYBSRHV3NIEHJYXYQVLTPFIIHPB3/
Change-Id: I978b1a6683cd56c8a72532d6368c47e67515c82d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This moves the assignment of driver_api to just before
the init function returns. This is in preparation to
make device_get_binding() return NULL if driver
initialization fails.
Change-Id: I69590c463b84877d250c63d4460b7e254b79c8b3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This moves the assignment of driver_api to just before
the init function returns. This is in preparation to
make device_get_binding() return NULL if driver
initialization fails.
Change-Id: Ibf08cb107885da7c1037c6e7d207530e1a4708f8
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This moves the assignment of driver_api to just before
the init function returns. This is in preparation to
make device_get_binding() return NULL if driver
initialization fails.
Change-Id: Ia0c7a0014eb28624cbf363f994d6149f1aa5aadd
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Demonstrate the use of SPI flash driver API on Arduino 101 board.
This is a re-submit of a previous merged patch which was reverted
because merge sequence was incorrect (the test app got merged
before the driver).
Origin: Original
Change-Id: I3fce61488ed7d48f400c12448f1c7a01c555661c
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add read multiple attributes request and response. Update RPC version
to niko-0412.
Change-Id: I5dfd99a1b8af866b69eae230ad24304eafccab4d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixes a problem where the nanokernel FIFO state information could get
out of sync due to a timeout.
The nanokernel FIFO structure nano_fifo now maintains two separate
queues: one for waiting fibers and the other for posted data. This
permits the safe and independent querying of the queues as needed
when getting and/or putting data from/on the nanokernel FIFO.
Change-Id: Ifbcb5004558b06fc55cad2a955f5be20e716b392
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Moves up and consolidate the BREDR specific code to skip certain forward
declaration and to prepare for possibility to initiate authentication
using start_security() routine.
Change-Id: Ic32d7d1376173d47b0eb0481eff37c6e56f995d4
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This reverts commit 3d08d16780.
The Read Response only contains a Characteristic Value that is less than or
equal to (ATT_MTU – 1) octets in length so, condition
(length < bt_att_get_mtu(conn)) is always true, and the full Characteristic
Value will not be read.
Change-Id: I63280e65b4ff5b830295aa9aadebe2758b626912
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
There is no need to have separate configs as init sample is now
used for different build configuration tests.
Change-Id: I917692f8a8e96345afc561dd04bdcf08cdfa5de7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Refines pairing method holder name to be more generic in connection object
representing applied method during authentication process.
Change-Id: Ia6f51788912974fbbda26b760d187c0f7e24bb0b
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Now that the incoming ACL & HCI event pools can be defined externally
to hci_core.c there should be convenience macros to know what's the
minimum required buffer size for these pools.
Change-Id: I6f2a7322a3d77e1304e9d925767a1fd3471c76c7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
So far the assumption has been that the host stack manages all
incoming and outgoing buffers. For the incoming buffers (from the
controller) this has required hci_core.c to manage its own pools and
do the host flow control. This setup makes perfect sense for an
architecture where the controller resides remotely on a different CPU
& address space (i.e. the "traditional" HCI transport case).
When the stack runs on a system where the controller resides in the
same address space this setup doesn't work that well. In such a
scenario the incoming buffers are ideally created as low down in the
stack as possible (i.e. below HCI), which means that the current
hci_core.c cannot be responsible for managing their pools.
To allow for both types of architectures this patch introduces a new
BLUETOOTH_HOST_BUFFERS Kconfig option that can be selected to say that
host-side management is desired, or deselected to say that the
controller (residing in the same address space) takes care of managing
the incoming buffers.
So far the incoming buffer types were identified by hci_core.c by
looking at their "free pool" pointers, however as soon as the pools
are allowed to be somewhere else this doesn't work. To solve this we
now require a minimum user data size for all Bluetooth buffers and use
that to store the buffer type.
Change-Id: I14bc32007e3e3f17c654f71f79b520650028d7ce
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This reverts commit 5680396aaa.
The network timers do not trigger with this patch so this needs
to be reverted for time being.
Change-Id: If653e3ecaae1ebddabe26227af876ff6b592675b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This information will be used to construct the fixed channel mask in
the L2CAP information response.
Change-Id: I66244ca2d5e40b3d204f5115c4bddad578f3ea64
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>