This procedure is used query local GATT Server for attributes
based on given search pattern. Attributes can be searched using
Attribute Handle range and Attribute Type.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This will be used for verification in GATT test cases.
This procedure is used query local GATT Server for attributes
based on given search pattern. Attributes can be searched using
Attribute Handle range and Attribute Type.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
When the controller is connecting to multiple connectable
advertisers, the events are scheduled consecutively avoiding
overlapping events. Calculation of the window offset did not
consider the preparation time before the event, causing the
new master role connection event to overlap with previous
event. This is now fixed by including the preparation time
in the used window offset from the end of connect_ind PDU
transmitted.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Due to insufficient ISR stack memory the irq offload was
corrupting the memory.
GH-4766
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Final edit pass on the release notes prior to 1.10 release.
Fixed misspellings in GitHub issues title (here and in GitHub).
Updated doc changes.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
I can't explain why "make run" worked before, but after this patch it
should definitely work.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The exticrX registers were shifted by a word, so configuring
an EXTI line on a port different of PA misconfigured the EXTI line
source and could flood with unwanted events.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
This board doesn't support the 'flash' goal, which was mistakenly
included during the CMake conversion.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
The BOARD variable has been removed from the environment provided to
runners. It's not being used to flash the board, so just remove the
check for it to avoid an exception at runtime.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Fixed the check related to initiating connection parameter
request procedure. This will avoid sending invalid repeated
dispatch of connection parameter request PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This introduces an nrf build to CI for the echo_server sample. Doing
so ensures that https://github.com/zephyrproject-rtos/zephyr/pull/5018
cannot regress again.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This fixes a regression from
https://github.com/zephyrproject-rtos/zephyr/pull/5018
The ieee802154 driver wouldn't build because nrf drivers/ieee802154
depends on the nordic ext drivers to build.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
When connection parameter request procedure was responded
by master role with Unsupported Link Layer Parameter Value,
a missing reset of the connection parameter request
procedure state caused next connection parameter request to
be incorrectly responded with same procedure collision
extended reject ind PDU. This caused an eventual connection
disconnection with reason LMP response timeout. This is now
fixed by reseting the state correctly.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix#5298
irq_is_pending function returned TXE/RXNE flag status
even if IRQ was masked, which led to enless loop
in uart_pipe when no TX was performed. Fix by reporting status only when
IRQ is unmasked.
Signed-Off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add link to the 1.10 technical docs to the available tech docs listed in
the documentation home page. Add the 1.10 release notes to the list of
available release notes in the release notes page.
Also update description of where to get Zephyr source code (downloadable
archives listed in the GitHub tagged releases page).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
If we have the maximum number of supported connections, then it
doesn't make sense to try to do connectable advertising.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Create a slightly smarter algorithm for choosing how long to advertise
each subnet. This is particularly important for the mesh_shell app,
since it uses a 10 second NODE_ID_TIMEOUT, meaning starting Node ID
advertising through user interaction would only succeed in advertising
one subnet (due to this being configured to 10 seconds).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Mesh Profile Specification 1.0 section 7.2.2.2.3:
"When the server starts advertising as a result of user interaction,
the server shall interleave the advertising of each subnet it is a
member of"
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Node ID advertising is short lived, so it's important to make sure
that subnets that get it enabled are first in queue to start
advertising.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We'll soon extend the start functionality with a bit more stuff
(prioritizing the started subnet), so in order to avoid excessive code
duplication, create helpers for these actions.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Until now the proxy server code would only advertise with the first
subnet. Introduce tracking of what the last advertised subnet was, and
give each subnet 10 seconds of advertising at a time.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add configuration client model support for NetKey Add message, as well
as a mesh shell command for calling the new API.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are files in the cloned copy of the Zephyr tree needed to setup
the development environment, so there's a bit of chicken and egg
problem.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Footnote reference in a code block is ignored. This text shouldn't
really be in a code block anyway, so just make it a paragraph with a
trailing footnote reference.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
With a clean Ubuntu install, following the getting started page
instructions for linux, only python3 is installed. Apparently (by
design), a python3 install does not create the symbolic link for
/usr/bin/python so the doc/Makefile complains.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
External serial flash on this board is 4MB.
Previously, this was confused with internal flash, which is 1MB.
Fixes#1270
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
When exporting flags to an external build system we need to deal with
the fact that we sometimes use generator expressions. Specifically, we
use generator expressions that look like this:
$<$<COMPILE_LANGUAGE:CXX>:-fno-exceptions>
This patch replaces the old API with a new one where users can ask for
compile options for specific languages, like this:
zephyr_get_compile_options_for_lang_as_string(CXX x)
The existing API would have either crashed or silently omitted flags
when a COMPILE_LANG generator expression was present.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The following files didn't have any copyright or license headers on them
when they got contributed. So add the SPDX Apache license and
appropriate copyright info:
boards/arm/stm32l476g_disco/pinmux.c
samples/basic/threads/src/main.c
tests/net/socket/tcp/src/main.c
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The reachable calculation for ND is using fractions combined with
integers and getting rounded to very small results (1ms or 0ms).
Let's split up the fraction into it's numerator and denominator
and perform the math in a better way to get the correct results.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
