Update the power sample and drivers with the new device driver power
management API using the existing logic
Jira: ZEP-954
Change-Id: Idd94232e458767635973e94e9fc673c01612c1e2
Signed-off-by: Amir Kaplan <amir.kaplan@intel.com>
Have one function that can be used for all possible device
purposes using a control code instead of the suspend
resume functions, makes it generic for device control.
Added device power states.
The older replaced APIs will be deprecated in a future patch
Jira: ZEP-954
Change-Id: I6dd3ebfd0fde3546b2d8397f19842f5758fda0c4
Signed-off-by: Amir Kaplan <amir.kaplan@intel.com>
Removed CONFIG_INT_LATENCY_BENCHMARK dead code.
CONFIG_INT_LATENCY_BENCHMARK depends on ARCH="x86", it will never
be true for ARM code.
Change-Id: Ia5779a69b1bf670ebb140c2923c9fe0af6b781d4
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Removed unused workaround in loapic. There are no references
of usage.
Change-Id: I8700b4b7ce8efef5e7b95e6cdd2b201eae3f1f37
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
During USB device reset, the controller must have its device address
cleared (set to 0). This is not really taken into account by most host
side stacks, which is the reason why this bug didn't show up before.
It was found when we were trying to run the USB20CV [1] compliance test
suite on Windows.
Without this fix the device doesn't show up on the targets list, which
means device enumeration failed. With this patch in place the bug is
fixed and the device gets listed.
Tested with the CDC ACM sample application.
Jira: ZEP-950
[1] http://www.usb.org/developers/tools/usb20_tools/
Change-Id: I0b78f7ce043fa29dde0fb7f3b3aecee9844f4d11
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Due to the memory pool structure only static declaration of
memory pool is possible.
Change-Id: I4797ed88fd2ac3b7812ff26e552e1745611c4575
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Some modifications to the base linker scripts were not propagated.
Change-Id: I73ab016d861779ad7e633ce8602d2e57845bde85
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The CPU manual indicates that 8-byte alignment is sufficient,
not sure why gdt_rom was aligned on a 16-byte boundary.
The null descriptor in the GDT is never looked at by the CPU,
save a few bytes by putting the 6-byte pseudo descriptor there.
Change-Id: I73f26cdeb30a91f8258c88ef960a45812a11d959
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This header has a bunch of data structure definitions and macros useful
for manipulating segment descriptors on X86. The old IDT_ENTRY defintion
is removed in favor of the new 'struct segment_descriptor' which can be
used for all segment descriptor types and not just IRQ gates.
We also add some inline helper functions for examining segment registers,
descriptor tables, and doing far jumps/calls.
Change-Id: I640879073afa9765d2a214c3fb3c3305fef94b5e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
API documentation wasn't linking to important conceptual overview
material available in the primer documentation.
This will need to be done over again when we work on the combined
kernel documentation, but this will give us a peek at what that
will look like.
Jira: ZEP-746
Change-Id: Ib1142575272c72d93af8d409518d0d0a4304ef32
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Use the ReST metadata document title directive instead of
embedded javascript to assign a title to the configuration
options (Kconfig) reference guide pages. This will generate
a static <title> directive in the generated HTML instead
of relying on javascript.
Change-Id: Ib70a8b1f641a5ed72be774f0f5b2a93a2d1c9b8c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Add _arch_irq_is_enabled external interrupt API to find out
if an IRQ is enabled.
Change-id: I8ccbaa6d4640c1ab8369d2d35c01a2cfbb02f6cd
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add irq_is_enabled external interrupt API to find out if an
IRQ is enabled.
Change-id: I4e4fb6318f0c9da442926b34aa6773eb11e90efe
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Do not clear pending IRQ when enabling an IRQ on ARM
architectures. Peripherals and S/W ISRs may be required to
be deferred until they are enabled later and the pended
IRQ should be retained for the ISR to be vectored to when
enabled.
Change-id: I808183018d8a2cc58390a1de3b4797b2bb7c6ec9
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Threads usings semaphore groups require a larger stack.
Also suppresses warnings in test_sema/microkernel due to Zephyr's
__printf_like() toolchain macro as variable types being printed
have changed between the microkernel and unified kernel.
Change-Id: If7490e0c68c299cc7a45010b9e6db7c01c826a6c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Semaphore groups are enabled by default. Disabling them will both
decrease the footprint as well as improve the performance of the
k_sem_give() routine.
Change-Id: If6c1b0e2e1f71afd43e620f05f17068039d12b05
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The '_timeout' structure is needed by dummy threads so that they can
handle timeouts.
Change-Id: Iefabd6ad93c8e176e95ce4262f5f3544dc90b7d5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Only define the __printf_like() toolchain macro if it is not already
defined. This permits projects to override this macro if desired.
Change-Id: Ic4a7b3eb48360f8e258493d6f447d3df793f572e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The routine _is_next_thread_current() checks if the current thread
is still the highest priority thread that is ready to run.
It is useful for determining if a thread must be swapped out when
timeslicing is in effect.
Change-Id: Ide7b89742a64f6082ca4c679a4b2fbd60792e30f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This commit adds the test-case for the ECC DH algorithm.
Origin: https://github.com/01org/tinycrypt/tree/v0.2.0
The code was refactored to eliminate function calls and checkpatch
errors. Furthermore, the PRNG was replaced by sys_rand32_init.
Refactoring history is available at:
Repo: https://gitlab.com/santes/tinycrypt/tree/refactoring
Commit: f71fc46403e90be0c54a77150e0539756d8314e7
Jira: ZEP-614
Jira: ZEP-861
Change-Id: I884f26ef8e9ff8e79ed0858678c4f51a37796e02
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit adds the test-case for the ECC DSA algorithm.
Origin: https://github.com/01org/tinycrypt/tree/v0.2.0
The code was refactored to eliminate function calls and checkpatch
errors. Furthermore, the PRNG was replaced by sys_rand32_init.
Refactoring history is available at:
Repo: https://gitlab.com/santes/tinycrypt/tree/refactoring
Commit: f71fc46403e90be0c54a77150e0539756d8314e7
Jira: ZEP-614
Jira: ZEP-862
Change-Id: Ief3c317f3d370a073f07307e53018991b03d9229
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This test is prompted by incorrect multilib selection for Cortex-M4
(armv7e-m subarchitecture) in Zephyr SDK 0.8.1 toolchain. The idea
is do an operation which guaranteedly results in a call to a support
routine in libgcc, which is part of multilib set. Long long division
is used as such, with a fault produced (see README) when built for
BOARD=frdm_k64f.
This test now passed with SDK 0.8.2 for frdm_k64f, but is added in
the hope of preventing/easing diagnosis of future regressions.
Change-Id: I07f01b0e70921703fc0d261fc6c48a2b13b29873
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The driver originally gets the full-duplex configuration
from the PHCON1 register and PDPXMD bit as stated by the
ENC298J60 specification document section 2.6 "LED Configuration".
This section trust the board to LEDB connection to signal the
full-duplex configuration.
This commit gets the full-duplex configuration from Kconfig
symbols to allow a proper functionality even when the board
is not connecting LEDB apropriately.
Change-Id: I803958409a611e23e2c3e03f40b412f1695947af
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
There is a tx semaphore that controls a single access to the
transmission service. The device is capable to manage a single
transmission call at a time. Multiple requests need to wait
for the resource to be free.
This commit adds the initial release to the tx semaphore.
Jira: ZEP-895
Change-Id: Ic9879cfd15bb1494644b2cf0f4565f7e6a2c1c22
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
ENCC28J60 specs section 6.5 "MAC Initialization settings"
state that MACON3(7:5) register configure automatic padding and CRC.
It also states that the configuration 111 and 011 both configure as
all short frames to be zero padded with a valid CRC appended.
Nevertheless, experimentally, there are ocassions when configuring as 111
frames does not have a CRC appended. This frames could be rejected
by the receiver if it is configured to do so.
This commit changes configuration from 111 to 011, which is not
presenting that behavior.
Jira: ZEP-842
Change-Id: I302bb99f7a1f23b298fe0db0245963b640644040
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Do not force selection of X86_IAMCU
Jira: ZEP-867
Change-Id: I2ca0bcd73502321e9e6f5a4638c309393da54e43
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Arduino 101 comes with a bootloader that supports DFU
and flashing of all cores using the dfu-util package.
This changes the memory layout of the image built for the
Arduino 101 and remove previous work-arounds to allow booting,
including the version-header section in the linker script.
The bootloader expects the text section at +0x30 from the physical
load address and thus requires special treatment in the linker
script.
Other changes by Andrew Boie:
The flash size parameters were both wrong. X86 side has 192K
of flash from 0x4003000 - 0x40060000, the entire span of
sys_flash1.
ARC side is now the span from 0x40010000 - 0x40030000, 128K.
Change-Id: Iecfa5d2b84a3f522d9eca06268d6b8b71a094aaa
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
TCF now prints more detail in the summary line to conform with the
rest of the lines to ease up parsing; update said line to filter it
properly.
Change-Id: I7c21eea18a67dbfd027d680036762546556f90db
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Quoting the product specification this device contains an "ARM
Cortex-M4 processor with floating-point unit" or, as this would
more normally be expressed an ARM Cortex-M4F.
Update Kconfig accordingly.
Change-Id: I5bd6f17724d0d4aa9aaab9961f12d4e8502c38a5
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
This fixes the UUID 128 bits to use the right byte order so it can be
decoded properly:
< HCI Command: LE Set Advertising Data (0x08|0x0008) plen 32
Length: 21
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
128-bit Service UUIDs (complete): 1 entry
Eddystone Configuration Service (a3c87500-8ed3-4bdf-8a39-a01bebede295)
Change-Id: Ia4aacaf3557d74a248f63cbffb2adb73b076d38c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Not every environment has $ZEPHYR_BASE/scripts/ in the PATH, which can
cause conflicts (eg: the test environment doesn't define it to
simplify the build instructions).
Using vercomp as $ZEPHYR_BASE/scripts/vercomp, we remove this
requirement.
Change-Id: I8c390f905907f42d1ba2b4d1378e188705164e13
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
As part of the effort to consolidate the BLE Controller's
HCI layer, the following files have been renamed:
* hci.h -> hci_internal.h: contains the HCI API to be used
by the driver
* main.c -> hci_driver.c: Implement bt_driver and includes
initialization and glue code
Jira: ZEP-726
Change-Id: Ica8b3e114da42a766a1b14ce59558cacd899a1a7
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The board defconfig is useless if it does not override what the SoC
sets. Boards can have different values than those set by the SoC.
Change-Id: Iab287c62986b20585b4df3e77bd973dbab50eea4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The FS needs to be allowed to choose the correct allocation unit
size based on volume size. Current code passes a fixed value to
the function that creates the FS. Passing 0 allows the FS to configure
the required au size.
Jira: ZEP-898
Change-Id: Ic43bfba8b8f8498f4db49db744743afad4b118cd
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Error out when old SDK versions are being used.
Jira: ZEP-584
Change-Id: If3515f38cc75d8a378614ef77d8946ba2d9ab28d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>