Nbuf data size needs to be set to 128 bytes, specifically for wpan
sample.
Debug output kills timing, and thus can generate spurious failures on
reception, so limiting it to errors by default.
Change-Id: Ia0b8c904e0bc66a7922af4f317db623db6c51462
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Hack in commit-id 835f93b8250abc0f3edbee9a99463fccac03597c was breaking
raw mode needed for wpan* adaptations.
Change-Id: If1ff96fa8170cc84e356fb0452e487f0ff174da5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
packet_received() does most of our work here already. The appdata
needs to be filled in correctly for TCP packets, which needed the
header size computation to be abstracted out of the ACK code.
Change-Id: Ifeb87c8ddcaa6f4b116214a3b3fb737ab03286f1
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
More protocols are incoming. Put the UDP specific stuff (address
wrangling and connection creation) in a separate function, leaving the
synchronous handling in place for other protocols to use.
No behavior changes.
Change-Id: I67fd9f683314ca9b2e671b84c46b9392db9496b2
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
I believe the original intention was to have code similar to:
buf = net_ipv6_create(...)
buf = net_udp_append(...)
buf = net_tcp_append(...)
buf = net_ipv6_finalize(...)
However, each protocol has different ways of creating packets and
checking invariants. Thus, the code now does something similar to:
if (proto == UDP) {
// original UDP code
} else if (proto == TCP) {
// TCP code, which creates the IP header as well
} else {
// unknown protocol
}
Which negates the need of such check in net_udp_append().
Change-Id: I7f05b7d556462b0db35aaecdf060539f8c246e8c
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The call would eventually return -EDESTADDRREQ, however -ENOTCONN is
the sane error value in this case.
Change-Id: I6c24bf9bf2ecc4bff6a615567547390e6f5b7d77
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This adds the required code to echo server so that it works with TCP as
well.
Change-Id: Ib45dd91a52a60ddb4d8f0ae11175ceb52199c398
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Adds support to send TCP packets using net_context_send() and
net_context_sendto() functions.
There's one behavior change: net_udp_append() will only append UDP
headers+payload if the context protocol matches. This would allow
sending only IP packets from Zephyr. Proper support for raw packets
should be added later if required, so the new behavior is to return
-EPROTONOSUPPORT if trying to send a packet through an
-unknown/unsupported protocol.
Note that sending packets outbound from Zephyr is still WIP; this is
just a step in the general direction of making it work.
Change-Id: Idcf26ad3820e85f1495e7029aed94f3b7abf25ed
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Both functions perform the same logic, except that the sendto() variant
expects two more parameters to specify the destination address.
Just obtain that from the context in the send() case and forward the
information to the sendto() variant.
Reduces code slightly, while also making it easier to add more
protocols later.
Change-Id: I48da621d8788d5ba2cddaf2982324d3e896c13c3
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
To avoid the risk of overflowing when dealing with retransmission
timeouts, increase the size of their representation to 32-bits.
Change-Id: I7c9c1e00c41f5ba75e19b0fd4527f273852eb85f
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
When debugging is enabled, compilation fails with an error, similar to
this:
... net/yaip/net_mgmt.c:155:35:
error: 'struct k_sem' has no member named 'sem'
k_sem_count_get(&network_event.sem));
^
As 'network_event' is a k_sem, there is no '.sem' field.
Change-Id: I09fb46ec02b62c30b9a12972abcaea8a36b84610
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Including shell allows to execute some kernel commands and make sure
system is not crashed.
Change-Id: I6157229614655dc7e523f1cf0f84ee7c58d7a717
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Current reassembly of 802.15.4 packets works only if fragments are
in correct order. But as per RFC 6282 reassembly should be based on
offset parameter in fragmentation header.
Change-Id: Icdcb10b9aa8f5837063b0201a64f8eb050c75681
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This is a hack, related to:
commit-id 835f93b8250abc0f3edbee9a99463fccac03597c
Change-Id: I7e305cef9ca908e2a71a011920663e1603ad8d6e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fragments reassembly was never used in l2.
Change-Id: Ia06ccbcd591ff79c43915e81c0b273533c607aa6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Current value is not enough anymore it seems. (depends however, if some
debug output is enabled or not).
Would be much better if the build system could automatically compute
such size.
Change-Id: I9052616a7923e484664e4f5c7760e6a6e1152c63
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There were different tags defined in testcase.ini files for
networking tests. Unify these and change the tag to "net"
in all networking tests. This makes it easy to execute
all network tests via sanitycheck.
Change-Id: I8ce7ccf8cccca35234602e37f6568db0b986d181
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There is something wrong with Arduino 101 ARC compiler.
Sanitycheck runs ethernet tests for this board basically using
this command:
cd tests/drivers/build_all
make pristine && make CONF_FILE=ethernet.conf BOARD=arduino_101_sss
Which then gives following warning
warning: missing braces around initializer [-Wmissing-braces]
which is then converted to error in sanitycheck.
Change-Id: I822c599cb172825a79b5b8e4a71cb9252757a435
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_buf tests were including net_ip.h which requires some
extra config options to be usable when the new native IP stack
is used. In order to avoid this dependency, define struct in6_addr
locally in the source file.
Change-Id: Iafe0d2b5b507665baaed23f5e2c55a9d9a300d47
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The 802.15.4 frame has a header and in the end after the payload a CRC.
Overall MTU is 127 bytes, but CRC is most likely going to be generated
by the device itself (offloading). Because the limitation of current
nbuf, it's not possible to keep this CRC in the buffer because it
require a user data size of 127 bytes but if we do so, IP stack will
fill in as much as it can as packet data, thus occupying the 2 last
bytes. This generates bugs. A perfect solution would be to generalize a
better handling of MTU and head or tail reserve data into nbuf, but
this will probably be solved in the future.
Change-Id: I1a0fee4d555e2717c1edd5afba399a1f17d9c7a9
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
User is able to send ICMPv4 Echo Request to destination
address.
Change-Id: Ie32d5970e5f3e75e925c283947f97e096e509555
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the destination IP address is loopback, then bypass
the L2 layer and directly feed the IP packet back to us.
If the destination IP address is unspecified, then
drop the packet.
All this is only done if CONFIG_NET_IP_ADDR_CHECK is
set as this extra processing can be unnecessary if
it is always known what addresses the device is going
to use. By default the address checking is enabled.
Change-Id: I323cce97a72533c75b0424870f08729479024ebf
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Create utility functions to create IPv4 packet if the
network context is not known.
Change-Id: I982830d09f3b91e23b75e6b63a5d97bfea0e8d4e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the user uses set_module command, then the target host
name pointer will be wrong. This is fixed so user can
either say "net ping 2001:db8::2" or if set_module command
is used "ping 2001:db8::2"
Change-Id: I708c53e329a11a18fcb448b34213e4b2f19c6390
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Due to huge delays with DEBUG log level change it to INFO.
Change-Id: I81caf78fc6e9e064c2ed8e18caa99351028af62a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In a case transmit is failed send ack to the driver with zero sequence
number which is not used for valid seqs.
Change-Id: I1047de9ab5de636c5a8983f31376046757c4dc0c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Following replacing semaphore with timeout semaphore transmit may not
be finished returning error after which communication stalls. Allowing
3 retransmits solves the issue.
Change-Id: Ibad05c2eac43dd6bb0ed72aaf16a7a2ef4185067
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Having 1024 bytes was really unsufficient and creating a lot of weird
bugs everywhere.
Change-Id: Ib642744fa6dfc9f3a699a0dc2f0c1783dc6f87b2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Semantic has changed in k_sem_take in comparison with legacy
nano_sem_take.
Change-Id: I06129b6f15f66266919bf371c2358e5634109156
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is meant to test echo applications with 802.15.4 L2 directly in
qemu.
Change-Id: I0edccd8c39360421dc77e0064147221d86877bdf
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use frag->data as a reference, not net_nbuf_ll or net_nbuf_ip_data.
Print out packet before compression/fragmentation, so it will help to
spot issues after such process.
Make sure as well no coloration is done if frag reserver is not set.
Change-Id: I7f1bdc9e5c39913b8d7f62b5ffacb9ba3e11ecc8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This commit adds the MQTT high-level API with Quality-of-Service
support. The following MQTT messages are covered by this commit:
CONNECT (tx), DISCONNECT (tx), PUBACK (tx, rx), PUBCOMP (tx, rx),
PUBREC (tx, rx), PUBREL (tx, rx), PUBLISH (tx), PINGREQ (tx),
SUBSCRIBE (tx), UNSUBSCRIBE (tx), CONNACK (rx), PINGRESP (rx),
SUBACK (rx) and UNSUBACK (rx).
Where 'tx' stands for transmission: routines that create and send
messages. 'rx' stands for reception: routines that receive an RX
buffer from the IP stack and parse the MQTT mesage contained in
that buffer.
Jira: ZEP-365
Jira: ZEP-591
Jira: ZEP-856
Change-Id: Ibee701a298127eb713aa3fde5aaf7d089ecd1b9d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Do not color the packet hexdump if there is no reserve set.
Do not print the ll part after 6lo compression/fragmentation.
Print out the actual frag being sent in radio driver.
Change-Id: I43118203c37fc76f60673c046732c8655ab7067b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>