Fixes https://github.com/zephyrproject-rtos/zephyr/issues/1280, but
also many other failures, where output was garbled due to this. Other
similarly affected issues are missing first benchmark (context) in
latency benchmark and some net tests.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
In final preparation for the 1.9 release, add the doc link for the
tagged 1.9.0 documentation to the index page.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Added missing asserts to catch high CPU use in radio ISR and
latencies, without which if radio packet pointer is not set
correctly, would cause spurious transmissions and invalid
behavior.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Optimised the get() function in nRF5 hal rand implementation
to reduce number of probable branching operations.
This is needed to reduce nRF51 platform's CPU use in radio
ISR when using the fast encryption setup implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the code to acquire the RSSI sample after critical
control path that processes PDUs.
This is needed to reduce the time taken to assign the next
packet ptr inside radio ISR.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
To meet CPU time usage restricts inside radio ISR on nRF51
SoCs, use ccflags -Ofast when using fast encryption setup
implementation in the controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Default to n the support for Data Length Update and
PHY update procedures on nRF51 SoCs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
bbc_microbit has been observed to regress on this sample and is
therefore a good candidate for CI.
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
/tmp/bt-stack-tester is not a pipe, but unix domain socket.
This commit fixes respective "make run" errors:
qemu-system-arm: -serial pipe:/tmp/bt-stack-tester: Could
not open '/tmp/bt-stack-tester': No such device or address
qemu-system-arm: -serial pipe:/tmp/bt-stack-tester: could
not connect serial device to character backend
'pipe:/tmp/bt-stack-tester
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Fixed an assert when peer responded with unknown rsp to
slave feature request when an existing another control
procedure was in progress.
This assert happened with a BT v4.0 peer implementation that
was performing a channel map update and local controller
initiated a slave feature request, receiving an unknown
response.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This was causing an unaligned pointer read on some architectures,
leading to crashes. This could be alternatively solved by rounding
the size to the nearest power of 2, but this wouldn't work with
packed structs.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This appears to be a bug in GCC: when an anonymous union contains
anonymous structs, GCC issues a warning that a field in one of the
anonymous structs has not been initialized. Fix by making the
structs not anonymous.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
append_bytes_to_buf() already writes a NUL byte; no need to call
append_bytes() again with "" and size 1.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The (artificially small) ISR stack was overflowing on this test when
CONFIG_DEBUG was enabled on qemu_x86. Really there's no reason to be
restricting stack size at all in a memory pool test, just remove those
settings and use the defaults, which are fine.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The script used to generate Kconfig documentation (genrest.py)
was creating .rst files without a final newline.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
k_timer_start(timer, duration, period) is API used to
start a timer. Currently duration parameters accepts
only positive number.
But a user may require to do some periodic activity
ASAP and start timer with 0 value. So this patch
allows 0 as minimum value of duration.
In this patch, when duration value is set as 0 then
timer expiration handler is called instead of submiting
this into timeout queue.
Jira: ZEP-2497
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Without this fix there is an issue when doing PB-ADV provisioning
with PTS. We keep retransmitting Public Key which is ACKed by PTS and
this leads to transaction timeout as PTS does not send confirm probably
because it keep receiving PK from us.
This patch also makes sure that transaction id is between 0x80 - 0xFF
Signed-off-by: Łukasz Rymanowski <lukasz.rymanowski@codecoup.pl>
Needed for following PTS test cases:
MESH/NODE/PROV/UPD/BV-10-C
MESH/NODE/PROV/BI-02-C
Signed-off-by: Łukasz Rymanowski <lukasz.rymanowski@codecoup.pl>
Fix the control and data packet management implementation
discovered during conformance testing.
This fixes:
TP/SEC/MAS/BV-12 [Master Start Encryption: Overlapping
Procedure]
TP/SEC/MAS/BV-13 [Master Start Encryption: Overlapping
Procedure with LL_SLAVE_FEATURES_REQ]
conformance tests in LL.TS.5.0.0.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
To test BMM150 geomagnetic sensor driver in polling mode,
sample application added by this patch can be used.
Signed-off-by: Punit Vara <punit.vara@intel.com>
This patch implements BMM150 driver with polling mode and its tested
with original BMM150 sensor hardware. Driver works on I2C
interface as of now.
Following datasheet is taken as reference while developing driver.
http://www.mouser.com/ds/2/783/BST-BMM150-DS001-01-786480.pdf
Signed-off-by: Punit Vara <punit.vara@intel.com>
Privacy on nRF51 is not passing the conformance and qualification tests
due to the time it takes to execute the privacy code while in ISR. Until
we come up with a way of optimizing and/or deferring the work, do not
allow privacy on nRF51 targets.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Include the fact that the Zephyr BLE Controller is ready for
qualification in the release highlights.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Use the macros generated during the build and located in version.h to
fill in the version information in the Read Version Information VS
command. Additionally reply with the correct hardware identifiers when
running on Nordic hardware.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Make it known to any out-of-tree apps that they need to update their
references to any Bluetooth Kconfig options.
Jira: ZEP-2558
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Added some clarification on flashing instructions for CC3220SF, in
support of customer issue.
Jira: ZEP-2581
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Seems due to incorrect rebase in commit 07270e52ba
("Bluetooth: controller: Coding style and refactoring"),
commit 95d55a2bfc ("Bluetooth: controller: Do not skip
one-shot tickers with slot"), and
commit 4ba2bb0d1c ("Bluetooth: controller: Be fair when
pre-empting a ticker"), a pointless expression was
introduced, fixed it.
Coverity-CID: 171563
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
