Fixed incorrect comparison of FLASH_SLOT in microseconds
with ticks elapsed.
This caused Bluetooth controller to try scheduling events
beyond the acceptable soft real-time design limits, due to
the CPU halted for flash erase operation.
Fixes#6229.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added missing HCI Supported Commands bit fields for PHY
Update feature. Also, refactored with missing conditional
compilation for other bit fields.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Revert incorrect calculation introduced in
commit ec5a787da2 ("Bluetooth: controller: Fix multiple
master role event scheduling") and revert a related
incorrect fix in commit a02606cbf9 ("Bluetooth:
controller: Fix missing ticks to us conversion").
Fixes the controller assert in ctrl.c line number 1477. A
64-bit arithmetic took ~35 us in Radio ISR for nRF51 causing
the ISR to take too much time before packet buffer could be
set.
Also, fixed master scheduling by correctly accounting for
the jitter between each master event.
Relates to: #5486
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect calculation of unreserved timespace which
should take into account the ticks_slot of current event,
and compensation for any reduced prepare in the current
event as well as in the next event.
This regression relates to the commit ad7c9d3d76
("Bluetooth: controller: Improved continuous scanning")
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Define a macro HAL_TIMER_SIGN_BIT to correspond to the most
significant bit support by counter hardware used by ticker.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use XON_BITMASK define instead of raw BIT(31) or bit shift
operations in code to represent use of reduced prepared by
an event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Kconfig help sections and add spacing to be consistent across all
Kconfig file. In a previous run we missed a few.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Split the search into two loops: in the common scenario, where device
names are stored in ROM (and are referenced by the user with CONFIG_*
macros), only cheap pointer comparisons will be performed.
Reserve string comparisons for a fallback second pass.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
If there's no more room to store new pairings, send a proper error
instead of letting the SMP timeout expire.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Explicitly show representation peculiarities of the negative values.
Additionally mention that fractional part is in one-millionth parts.
Fixes: #5692
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This patch adjusts the default permissions on the bus master 3 (NET).
Recent changes restricted this to supervisor only, and this caused
issues with the network controllers access to memory.
Restrictions on access should really be enforced on the ARM core bus
master.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The previous default, "config-threadnet.h", is more or less arbitrary
choice made in a commit 312def2c78 1.5 years ago. In particular,
it's not related to Thread support in Zephyr per se (there was no
such support at that time).
It doesn't make sense to have a default intended for a particular,
not widely used (yet) protocol. Instead, the default should work
out of the box with a contemporary widely deployed arrays of TLS
servers, which are HTTPS server. config-mini-tls1_2.h works with
https://google.com, and by extension, with many other servers on
the Internet.
So, have that as the default, and let applications with special
needs to override that to what they need.
Addresses: #6132
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This config enables TLS 1.2 (only), as its name suggests, and
contrary to the (copy-pasted) comments in the file header, so
update these comments.
Fixes: #6131
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This patch adds an additional constraint to make sure that we only
do the application memory sizing if it is really necessary.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
platform_whitelist does not deal with comma separated strings. Also
remove build_only option, this should also run on those devices.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For those still using old variable ZEPHYR_GCC_VARIANT.
raise an error if the variable is not defined.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This makes things slightly cleaner, and we don't need to rely on the
deprecated net_buf_simple_init() API (which was a bit hackish for
these custom-constructed net_buf_simple objects anyway).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When an __ASSERT() fails compiled for ARCH_POSIX,
instead of spinning forever (probably until sanitycheck times out)
it now terminates immediately and returns 1 to the shell
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This is one way we can support out of tree board definitions. Basically
all this needs is a board definition in the application source directory
that follows the same structure we have in the main Zephyr tree (also
allowing multiple custom boards). An application tree would look like
this for example:
boards/
CMakeLists.txt
prj.conf
README.rst
src/
with boards following the same structure as in Zephyr:
.
├── boards
│ └── x86
│ └── arduino_101
│ ├── doc
│ │ └── img
│ └── support
└── src
To use this, you need to specify the BOARD_ROOT variable on the command
line when building:
cmake -DBOARD=<board name> -DBOARD_ROOT=<path to boards> ..
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
I am the original author of the API and initial drivers, and would
like to maintain this area.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
The read/write_kernel_stack tests are confusingly named and incorrectly
implemented for ARM; they are intended to test that user mode threads
cannot read or write their privileged stacks. The privileged stacks
on ARM are not relative to the user stack, and thus their location
cannot be computed from the user stack. To find the privileged stack on
ARM, we have to use _k_priv_stack_find(), which we do during setup
in test_main() rather than from the usermode thread itself. Accessing
thread_stack directly from the test function requires making it
non-static in ztest, so we also give it a ztest_ prefix to avoid
collisions with other test programs. Rename the test functions and
global pointer variable to more accurately reflect their purpose.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Prior to this commit, `flash_area_layout()` was being passed a pointer
to the incorrect type (`uint32_t *` where `int *` was expected). This
caused the following warning to be reported:
```
[...]/subsys/storage/flash_map/flash_map.c: In
function 'flash_area_get_sectors':
[...]/subsys/storage/flash_map/flash_map.c:191:32:
warning: passing argument 2 of 'flash_area_layout' from incompatible
pointer type [-Wincompatible-pointer-types]
return flash_area_layout(idx, cnt, ret, get_sectors_cb, &data);
^~~
[...]/subsys/storage/flash_map/flash_map.c:136:12:
note: expected 'int *' but argument is of type 'uint32_t * {aka long
unsigned int *}'
static int flash_area_layout(int idx, int *cnt, void *ret,
^~~~~~~~~~~~~~~~~
```
This commit changes the argument type to `u32_t` for both functions.
Signed-off-by: Christopher Collins <ccollins@apache.org>
The contributing instructions were currently centered exclusively around
Linux. Make them generic and cross-plaform while highlighting the tools
that do not currently work on Windows, namely:
* sanitycheck
* checkpatch
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This fixes the issue when after incomplete timer expiration
host sent ACK.
The host failed in two cases:
1. Sending ACK right after the incomplete timer expiration;
2. Sending ACK from new RX context. Now, seq_auth of cancelled
message is not cleaned on RX reset, so segments of cancelled message
will be discarded when resend.
According to the Mesh Profile v1.0
"When the incomplete timer expires, the lower transport layer
shall consider that the message being received has failed and
cancel the acknowledgment timer. Any segment of a canceled
message shall be ignored."
Fixes#6023
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Instead of composing expressions with a logical AND, break down it into
multiple assertions. Smaller assertions are easier to read. While at
it, compare pointers against the NULL value, and numbers against 0
instead of relying on implicit conversion to boolean-ish values.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Without the parenthesis, the code was asserting this expression:
start + (size > start)
Where it should be this instead:
(start + size) > start
For a quick sanity check when adding these two unsigned values together.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Commit 247782a7b3 moved the sam0 UART
and SPI configuration into pinmux. Using these drivers without pinmux
causes the kernel to skip the pin configuration.
Tested on arduino_zero.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Static variables that don't strictly need to be initialized at
boottime should be declared with __noinit. This makes a considerable
difference especially for large buffers.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a testcase.yaml configuration to spi_loopback test to include
it into sanitycheck.
Fixes#4576
Signed-off-by: Daniel Wagenknecht <wagenknecht.daniel@gmail.com>
This restores the board specific configurations that were present
before moving the test to using KConfig.
<board>.conf files from boards subdirectory get merged with
prj_base.conf file.
Signed-off-by: Daniel Wagenknecht <wagenknecht.daniel@gmail.com>
Convert this test to using KConfig instead of conditional compilation.
Standard configuration is provided by prj_base.conf and KConfig
default values.
Remove prj_<board>.conf files.
Signed-off-by: Daniel Wagenknecht <wagenknecht.daniel@gmail.com>
The old ARMV6_M Kconfig option has been removed, and so to correctly set
the dependencies for SW_VECTOR_RELAY we need to use the new
ARMV6_M_ARMV8_M_BASELINE.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In the case of an unexpected PDU we need to send the right response.
This was already taken care of for PB-ADV, but not for PB-GATT.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Provisioner might have missed our earlier Link Acknowledgement, so
if we receive another one with matching Link ID and link.expect state,
simply send another acknowledgement.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When sending a segmented message, the state could get stuck if the
advertising bearer fails in transmitting and we don't detect that it
happened. Add a send_start callback for all packets so we can always
know if sending fails.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When both PB-ADV and PB-GATT are enabled, the PB-ADV code (prov.c)
uses the bt_mesh_proxy_get_buf() API to get a net_buf_simple buffer.
Unfortunately this function also suffers from the same issue that was
fixed by commit 2b273444c1.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In net_app_init_client(), the remote port is set after an initial
set of checks based on the remote_addr's assigned family.
However, if the peer_addr_str is a host name which needs to be
resolved via DNS, the family won't be set yet, and the port is
left as 0.
To fix this behavior let's move the port assignment after the
DNS lookup section to be sure that the remote sa_family is set.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
As discovered in https://github.com/zephyrproject-rtos/zephyr/issues/5952
...a duplicate call to k_delayed_work_submit_to_queue() on a work item
whose timeout had expired but which had not yet executed (i.e. it was
pending in the queue for the active work queue thread) would fail,
because the cancellation step wouldn't clear the PENDING bit, causing
the resubmission to see the object in an invalid state. Trivially
fixed by adding a bit clear.
It also turns out that the behavior of the code doesn't match the
docs, which state that a PENDING work item is not supposed to be
cancelled at all. Fix the docs to remove that.
And on yet further review, it turns out that there's no way to make a
test like the one in the linked bug threadsafe. The work queue does
no synchronization by design, so if the user code does no external
synchronization it might very well clobber the running handler. Added
a sentence to the docs to reflect this gotcha.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Courtesy of thomsten on IRC, add a link to a handy RTT viewer written in
Python and cross-platform.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Describe how to disable the UART console to avoid unexpected
redirections that will prevent the console output to go through RTT.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove unused _k_thread_single_start() as this logic is
now moved to _impl_k_thread_start().
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
