The default of the stack is now to automatically enable LPN
functionality after a given timeout.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add some automated policies for starting LPN establishment and make it
possible to perform the establishment in a "low power" way, i.e.
switching to low duty-cycle already when starting to send Friend
Requests.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Even if endpoint addresses are configurable by each platform,
it would be better to make the default configuration compatible
with a larger board range.
e.g. STM32 OTG FS device has only four endpoints (0x84 is out).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
https://github.com/zephyrproject-rtos/zephyr/issues/4864 revealed that
calling zephyr_sources() on a directory will silently omit the
directory. This is a clear user error and should be immediately
flagged as such.
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
If we were asked to add 10KB to a packet, adding it won't help -
such packet won't be even sent by hardware on our side, and if
it is, it will be dropped by receiving side. So, make sure we
never add more data than MTU as set for the owning interface.
This actually gets a bit tricky, because we need also to account
for protocol header space. Typically, when net_pkt_append() is
called, protocol headers aren't even added to packet yet (they
are added in net_context_send() currently), so we have little
choice than to assume the standard header length, without any
extensions.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Since run is also used commonly, add it as a goal as well for those
users of the extension that want to create a sequence similar to:
$ make
$ make run
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The new :compact: option allows for a single block of code output
without additional newlines or comments.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
New arguments added:
- conf: -DCONF_FILE=<>
- gen-args: Additional arguments to pass to CMake
- build-args: Additional arguments to pass to Make or Ninja
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
According to the Mesh Spec value 0x00 of ReceiveWindow parameter is
prohibited. This is needed to pass MESH/NODE/FRND/LPN/BI-03-C.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The intention of the code was to access client->conn and not
clients->conn (which would always access the first client struct).
Fixes#4738
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The old way of constructing FLASH_SCRIPT_ENV_VARS was corrupting the
values that were passed to the flasher. This new method is the
standard way of creating a dictionary/hashmap in CMake and does not
suffer from the same problem.
This fixes
https://github.com/zephyrproject-rtos/zephyr/issues/4844#event-1334599401
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
The QEMU_NET_STACK is enabled automatically if building
a networking application to QEMU so no need to do it for
each networking sample.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If compiling networking application for QEMU, then serial ports
must be set properly for QEMU<->host connectivity using SLIP.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The function return type was declared incorrectly. Also, the magic
checking for i after exiting the loop could cause some false positive
compiler warnings. Instead, return directly from the loop (with the
downside of duplicating a few lines of code).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It's in practice impossible for the time between two beacons to be
more than 50 hours (the approximate wrap-around time for a 32-bit
millisecond timer), so we can use a 32-bit timestamp instead of a
64-bit one for the beacon tracking.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The LE scanning and advertising implementations were allocating and
holding buffers (the scan & advertising parameters respectively) while
at the same time potentially sending other commands (such as setting
the local private address). If these APIs would end up being called
simultaneously from different contexts, this could lead to a deadlock
in trying to allocate HCI command buffers, especially considering that
the default HCI command buffer count is 2.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some toolchains, such as the one provided by Espressif for the ESP32,
or ISSM provided by Intel, will contain only the compiler, linker, and
supporting tools. Other binaries needed by the build system that are
provided by the Zephyr SDK need to be found somewhere else.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
sanitycheck was incorrectly documenting that --extra-args would pass
on it's input unchanged to Make.
In reality --extra-args acts as a way to define extra CMake cache
entries. The key-value entries will be prefixed with -D before being
passed to CMake.
E.g
"sanitycheck -x=USE_CCACHE=0"
will translate to
"cmake -DUSE_CCACHE=0"
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
USE_CCACHE has been deprecated. ccache now defaults to being enabled
and users can define the CMake variable -DUSE_CCACHE=0 to turn it off.
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Version 0.2.8 of this library has been released on Aug 29, and this
patch updates the library from version 0.2.7. A summary of changes
is available at the official repository at:
https://github.com/01org/tinycrypt/releases/tag/v0.2.8
A number of the changes we already had in tree, so the import to sync
with v0.2.8 is pretty minor.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move the dts files into the board dir so that board ports can be more
standalone. This will allow us at some point to have board ports
outside of the tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move the dts fixup files into the board dir so that board ports can be
more standalone. This will allow us at some point to have board ports
outside of the tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Allow for DTS_SOURCE to be defined in other locations (ie by board
directory code). Thus allow the board to set any location to find the
dts source file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Allow for DTS_BOARD_FIXUP_FILE to be defined in other locations (ie by
board directory code). Thus allow the board to set any location to find
the fixup file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rename the variables related to DTS fixup to be clear what they are used
for. This also lets us introduce a SOC level DTS fixup in the future
that is distinct from the board one.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update the documentation for the Bluetooth samples not to refer to the
old style of building using make. Instead, simply refer to the general
instructions.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
CMake requires "-D" for every macro that is passed into it. Add the
relevant "-D" for the Make variant of the extension.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
During large USB transfer it's pretty common to call ep_write whereas
the previous TX transfer is not achieved and so the TX FIFO space is
not available. Sleeping 20ms in this case introduce a relatively high
latency and reduce the throughput.
This can be observed when pinging the board with CDC-ECM net class.
ping reply is split into 2 USB TX transfer, the second one is only
triggered after 20ms, making ping latency > 20ms.
To fix this, just continuously read the FIFO availabilty and fire TX
as soon as possible.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Rename netusb project file to be more general and support sanity build
for 96b_carbon board.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In the same way as dw driver, check that FIFO is empty before
writing any new data. This patch introduces a boolean semaphore
which is requested before any new TX transfer and released on
transfer completion.
This fixes usb-ecm support on 96b_carbon board.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
When sending a packet with AR flag set, the ACK frame that should be
replied to it must holp the same sequence number, so let's verify this
properly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
