Key Refresh Phase 2 is analogous to the Key Refresh flag being set.
This means that the flag can directly be used as the index to the
new/old key two-element array.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since the stack supports runtime reset and reprovisioning, we need to
clear the network message cache whenever creating a new mesh network.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove inconsistent and sometimes unreliable tracking of what
advertising parameters should be used and when the Node Identity
advertising started. The main change that facilitates this is to have
the Node ID start timestamp as part of the mesh subnet context.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some PTS test cases only work when we're advertising using Network
Identity. Using the default timeout of 60 seconds for Node Identity
will cause this test cases to fail (i.e. the PTS gives up before
Zephyr transitions to advertising from Node Identity to Network
Identity).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The shell was being inconsistent in its parsing of boolean parameters.
Some commands were documented as accepting "on" but were actually
parsing the parameter with strtoul() which would result in 0.
Introduce a new helper to convert a string to a u8_t which still
accepts "on" or "enable". This gives us full flexibility of having a
simple interface to the user, but still allowing non-boolean values to
be tested (since on-air the value is a full octet).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of having a hard-coded UUID, introduce a command to change it.
This is particularly useful if there are many unprovisioned nodes
around.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Having the Static OOB value set up-front can be confusing to the user
since they will not know what the value is. Start off by having it
unset, but introduce a new command using which the user can either set
or clear it.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Both options were originally parameters to *make*, not cmake, so people
can augment QEMU ibocation from run to run, not from complete rebuild
to complete rebuild. Make them such again.
However, just in case, ability to set "default" value for those options
on CMake level is preserved.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The target_cc_option[_fallback]() CMake extentions are now C++
aware. This means that they will now test options with both C and C++
compiler and include flags appropriately.
This fixes a warning that was issued when -Wno-pointer-sign was used
with .cpp files.
cc1plus: warning: command line option ‘-Wno-pointer-sign’ is valid for
C/ObjC but not for C++
NB: This patch is designed to only affect CONFIG_CPLUSPLUS builds in
case there are any adverse affects with using generator expressions.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This function has presents an easy-to-use interface that wraps the two
CMake built-in functions check_c_compiler_flag() and
check_cxx_compiler_flag().
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Fixes the following compile error when building
tests/bluetooth/shell application:
In file included from subsys/bluetooth/shell/ticker.c:16:0:
subsys/bluetooth/shell/../controller/util/mayfly.h:21:2:
error: unknown type name 'memq_link_t'
memq_link_t *_link;
^~~~~~~~~~~
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
test_main() takes no arguments, so this was causing a fault
after returning from test_main due to the stack canary checking.
Before, the test run ends with:
PROJECT EXECUTION SUCCESSFUL
***** CPU Page Fault (error code 0x00000011)
Supervisor thread executed address 0x00400000
PDE: 0x027 Present, Writable, User, Execute Enabled
PTE: 0x80000000267 Present, Writable, User, Execute Disable
Current thread ID = 0x00401080
Faulting segment:address = 0x0008:0x00400000
eax: 0x00000000, ebx: 0x00000000, ecx: 0x0040b19c, edx: 0x000056df
esi: 0x00000000, edi: 0x00000000, ebp: 0x000051c0, esp: 0x0040b1d8
eflags: 0x246
Caught system error -- reason 6
After, the test run ends with:
PROJECT EXECUTION SUCCESSFUL
Reported-by: Joshua Domagalski <jedomag@tycho.ncsc.mil>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Save the required scratch pad register (in this case only edx)
before calling the C function.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
We need to send out a Health Fault Current Status (the Health Model's
publication message) when all faults are cleared. The logic for
calculating number of faults was also wrong after the updated model
publication API.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Health Current Fault message size was being set too small to fit
any faults. Use a macro to make sure the size gets applied in both
places where appropriate.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fixes error encountered during connecting BLE endpoint.
[bt] [ERR] le_remote_feat_complete: Unable to lookup conn for handle 32
This is to work around a buggy controller that states support for
enhanced privacy, but misbehaves when it's enabled. This change
makes it possible to ensure the host doesn't try to enable the enhanced
event by simply disabling the privacy feature in Kconfig.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
If we get a different key value in Phase 1 we should return the same
"Cannot Update" error as in phases 2 and 3. This fixes test case
MESH/NODE/KR/BI-02-C.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes it possible to pass all IV Update tests without having to
build a custom configuration for some of the tests. We also disable
the feature in all sample configurations, but leave it on in the
tests.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There was a chance that initial beacons for subnets would be sent with
uninitialized data. Make sure we initialize the beacon data each time
when we create a new subnet.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Make sure committers have correct and valid git settings and verify that
the committer idenity matches one of the signed-off-by entries.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use NULL instead of "", fix typos, and indicate app-key-add last
parameter as optional (to match the command implementation).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for sending messages that add, delete or overwrite Label
UUIDs, and add commands for these to the shell. With the help of these
commands it's possible to pass Transport Layer PTS tests (in
particular TNPT/BV-05-C) by manually adding a Label UUID through
module subscription, since the test case itself does not do this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
QEMU_INSTANCE should be a parameter to *make*, not cmake, so people
can run few instances of the same sample without building each of
them separately in separate dirs.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Compute the length of the TX payload that is transported in one
IPv4 or IPv6 datagram taking into account UDP, ICMP or TCP
headers in addition to any IPv6 extension headers added by RPL.
The TCP implementation in Zephyr is known to currently carry at
maximum 8 bytes of options. If the protocol is not known to the
stack, assume that the application handles any protocol headers
as well as the data. Also, if the net_pkt does not have a
context associated, length check on the data is omitted when
appending.
Although payload length is calculated also for TCP, the TCP MSS
value is used as before.
Define IPv4 minimum MTU as 576 octets, See RFC 791, Sections 3.1.
and 3.2.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The code would unconditionally clear sent_req in update_timeout(),
which would e.g. cause us to switch to Friend Polls if the Friend
didn't respond to a Subscription List Add/Remove on the first attempt.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The purpose of using something less than the configured poll timeout
was to cover the case where the LPN establishes Friendship before the
provisioner has completely configured it. However, there's the "more
data" flag in the initial Friend Response, and we now also have a
public API to request for more messages. Both of these features
diminish the value of having a reduced initial timeout. Also, some LPN
test cases do not expect us to send frequent polls initially, causing
failures with the PTS.
Therefore, introduce a Kconfig option to set the initial timeout, and
make it default to the actual poll timeout.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Many apps, the mesh shell included (due to PTS test requirements)
benefit from exposing LPN state and polling outside of the stack.
Introduce new APIs for these, and add code to the mesh shell module to
take advantage of them.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This fixes https://github.com/zephyrproject-rtos/zephyr/issues/5097.
The desired behaviour is that when a flag that is given through the
zephyr_* API conflicts with the zephyr_library_* API then precedence
will be given to the zephyr_library_* API. In other words, local
configuration overrides global configuration.
We choose to rely upon the compiler for sane behaviour when flags are
in conflict. Compilers generally give precedence to flags given late
on the command line. So to ensure that zephyr_library_* flags are
placed late on the command line we create a dummy interface library
and link with it to obtain the flags.
Other options were considered, source file properties would also have
higher priority. But that would have required some kind of
post-processing stage that applies all the source file properties.
Linking with a dummy interface library will place flags later on the
command line than the the flags from zephyr_interface because
zephyr_interface will be the first interface library that flags are
taken from.
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
