This reverts commit 5e545e47fb.
This is breaking some tests, needs to be retested with latest master.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The _vector_start was placed before the CONFIG_TEXT_SECTION_OFFSET, thus
adding the offset in the relocated vector table, making the table
invalid when relocated with a non null CONFIG_TEXT_SECTION_OFFSET.
This was tested using MCUboot with a 0x200 offset for the image header.
Fixes: eb48a0a73c ("arm: armv6-m: Support relocating vector table")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reusing the k_thread structure requires a cleanup of all essential
info. We need to remove the ztest_thread information from the timeout_q.
If left untouched, when a tick occurs the thread's delta_ticks_from_prev
would be corrupted. This inturn causes a chain reaction of problems.
Thus once the unit test is completed the timeout_q is scrubbed.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This issuse is found in arch/arc's memory domain api support.
For arc, dwarf-2 is used to keep compatible with synopsys metaware
mdb debugger. However, the gen_kobject_list.py cannot generate the
correct information from dwarf-2, because loc.form's value is
DW_FORM_block1.
If dwarf-4 is adopted, there is no issuse.
Other arch and tools may use dwarf-2 and face the same issuse, so
this commit is created.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Run Kconfig on every reconfigure but with different fragments
depending on the situation.
When .config is missing or when a file from merge_config_file has been
modified use the merge_config_file's as input, otherwise use .config
as input.
This should match the behaviour before kconfiglib.py was introduced
and fixes#5673.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Fix in the prj.conf so the test will also work in boards which
by default compile a BT controller.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The new native Windows development environment no longer relies on MSYS2
or WSL at all. Instead it uses a standard Command Prompt and Windows
native tools. Document the installation and setup process in order to be
able to compile and develop.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
'conf' is part of the zephyr SDK or need to be built and installed in
the path. We now using python for Kconfig processing, so this is not a
strict requirement and we should be able to build without it. If the
binary is not found, just go on with our business.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The offset of the IP header in a received packet depends on the L2
header size. For Ethernet this is 14 bytes which puts the u32 IPv4
addresses on a non-u32 byte boundary. This causes chips that don't
support unaligned access (like the Cortex-M0) to fault.
The fixes in this patch are enough to ping the board and run the
http_server sample.
Signed-off-by: Michael Hope <mlhx@google.com>
Make it possible to run in other posix boards.
By default, if the POSIX board does not define the TICK_IRQ
just run without that part of the test, printing a note.
The place where other POSIX boards should define it, is also
clear, and should be easy to keep those lines free from merge
conflicts in the future.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This test should be blacklisted for any board based
on the POSIX arch, not just the native_posix board
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
When checking if a testcase passed or failed, allow there
to be prefixes or postfixes in the line, around
PROJECT EXECUTION SUCCESSFUL/FAILED
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
BT does use a semaphore, which does cause the count of sempahores to
fail, disable BT here to only keep locally created objects.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The jquery provided by Sphinx 1.5.5 has a bug dealing with the
coordinates returned for offset().top for empty <span> tags, generated
by Sphinx for intra-document labels used to create hyperlink anchor
targets. As reported in PR #5591, some browsers (chrome for example)
don't scroll to the right spot in the document when we link to these
intra-document label points. jquery v3.1.2 fixes this. (When Sphinx
updates the jquery included in its release, we can remove our copy that
is overriding the copy installed in the generated output by Sphinx.)
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update tags.sh tool to generate appropriate files to use with cscope and
ctags programs.
Current implementation generates tags for all but samples and it's
possible to filter by architecture.
Signed-off-by: Juan Manuel Torres Palma <j.m.torrespalma@gmail.com>
Due to a chicken-and-egg problem, it's not possible to call
board_runner_args() directly from an application CMakeLists.txt and
have it take effect:
- if the board_runner_args() call appears before including the
boilerplate file, then the function is undefined and an error
occurs.
- if the call appears after including the boilerplate file, then
board_finalize_runner_args() has already been called by the
relevant runner.board.cmake file, so it won't take effect.
Similarly to the way set_conf_file() works, allow applications to
declare additional runner args by checking if they have provided a
macro named app_set_runner_args(), which contains calls to
board_runner_args(). Using a macro means that we can invoke it with
the definition of board_runner_args() in scope.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Document USB Vendor and Product IDs and their intended usage.
Set the Vendor and Product IDs and define the USB bcdDevice
Device Descriptor Device Release Number to be the binary
coded decimal representation of the Zephyr major and minor
kernel version number.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Moved fetch of flash device bindings to early initialization of the
application.
Device bindings are constant while the application is running so
it is better to fetch it at startup, and not every time flash_map
procedures are called.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Zephyr already supports NFFS as a storage layer, but it might
be a little bit too heavyweight for certain applications in
memory-restricted ICs.
This module is response for need of Lightweight flash storage
capability. FCB is ported form MyNewt as native zephyr module.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Introduce flas_map module is abstraction over flash memory and its
driver for using flash memories along with description of
available flash areas.
Module provides simple API for write/read/erase and so one.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
quark_se_c1000_devboard already embeds a cc2520 which is a 2.4Ghz 15.4
radio chip. But if one want to try a sub-Ghz radio chip such as the
cc1200 on it, it will require to wire as this configuration expects it
to be done.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470,
868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g).
Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g'
version support in the Soft-MAC will follow later.
The chip itself is closer to a bare metal radio modem than to a usual
15.4 chip: up to the user to provide the right RF settings for the
carrier band. Such settings can be generaten through TI's SmartRF tool.
Hopefully, for channel selection, this driver will be clever enough to
compute the proper register change without any special input from the
user. This will work for all the bands supported by the chip.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
For some reason, ieee802154_verify_channel had a device parameter
instead of an iface like all the others.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It will be up to the user to configure a valid channel, through
net_mgmt, and call net_if_up() in order to get the device up.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Depending on device's band, the upper channel limit can vary a lot in
Sub-Ghz. Thus verifying it directly in L2 before requesting it to the
device.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Sub-Ghz bands have different limit of channels. 10, or more than a
thousand is actually possible. Thus the device needs to expose such
limit to the L2 which is unaware of frequency band logic. L2 will
then allow user to select a proper channel.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This field is set and maintained, but not actually used for anything.
The only purpose for it would be to validate ACK numbers from peer,
but such a validation is now implemented by using send_seq field
directly.
Fixes: #4653
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Case #1: If ACK received and our retransmit (i.e. unacked) queue is
empty, it's error. It's incorrect because TCP requires ACK to set for
every packet of established connection. For example, if we didn't
send anything to peer, but it sends us new data, it will reuse the
older ack number. It doesn't acknowledge anything new on our side,
but it's not an error in any way.
Case #2: If retransmit queue is only partially acknowledged, it's an
error. Consider that we have 2 packets in the queue, with sequence
numbers (inclusive) 100-199 and 200-399. There's nothing wrong if
we receive ACK with number 200 - it just acknowledges first packet,
we can remove and finish processing. Second packet remains in the
queue to be acknowledged later.
Fixes: #5504
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Per RFC 793:
A new acknowledgment (called an "acceptable ack"), is one for which
the inequality below holds:
SND.UNA < SEG.ACK =< SND.NXT
If acknowledgement is received for sequence number which wasn't yet
sent, log an error and ignore it.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Wrong buffer assigned for receiving the last 2 bytes in multi
byte reception of STM32F4 i2c driver. Change the buffer to
correct one.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Since no GPIO trigger is configured in hts221 sample application,
update prj.conf to enable TIGGER_NONE flag
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This reverts commit 2a7efb7419.
"choice" section in board Kconfig.defconfig introduces a dependency
from the sensor to the board. As a consequence a warning was generated
whenever the sensor was used on another board.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This reverts commit 2e20f49167.
"choice" section in board Kconfig.default introduces a dependency
from the sensor to the board. Then a warning was generated
whenever the sensor is used on another board
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Defining TRIGGER_MODE choices in board Kconfig.defconfig files
brings unwanted dependency and warning messages when using sensors
on other boards.
Change sensor configuration by enabling wanted trigger choice rather
than redefining choice.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
