Remove SoCs part dependency of CLOCK_STM32_PLL_PREDIV1 config since
it will only be used on parts having an HSE oscillator, ignored
otherwise.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Rename some legacy upstream and downstream interfaces in
radio_* namespace to ll_* namespace for consistency.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Introduce flash controller nodes for STM32 SoCs that are supported in
the flash driver. This is a precusor to converting the flash driver on
stm32 over to using device tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In order to be able to build MCUboot for nRF51 we require the flash
driver name in the nRF51 soc.h header.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Corrected the board name in the configuration short
description string. It was the old Simple_process name which was
replaced with native_posix
Corrected also the comment/title in the "Board Options" menu
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The native SOC Kconfig file was still referring to the old
configuration option SOC_INF_CLOCK which was replaced with
SOC_POSIX.
This produced a warning on configuration which is now fixed
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Refactor Kconfig and CMakelists.txt to be able to
conditionally compile in BT_LL_SW variant in the controller
subsystem. This is done to support future controller with
vendor specific variant implementations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add conditional compilation and move code to support
building a non-connectable Bluetooth shell application.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When we updated the Nordic SoCs for getting flash controller label/name
from dts, we missed updating the 96b_nitrogen/dts.fixup file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We duplicate a lot of fixup info per board which could be done at the
SoC family level. So introduce the concept of DTS_SOC_FIXUP_FILE which
we default to arch/<ARCH>/soc/<SOC_FAMILY>/<SOC_SERIES>/dts.fixup.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The work-around previously setting ARC builds to use -O2 to fix an
ADC bug #3797 is no longer needed, we should this patch and revert
to the default -Os flag to optimize for smaller size.
Signed-off-by: Jimmy Huang <jimmy.huang@intel.com>
To get coverage data from all samples and tests, enable this by default.
Right now we only get coverage data from tests, however many samples we
currently have can run natively and can generate more coverage and
testing.
This should be removed once we have tests provide better coverage.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Those are added by sanitycheck, no need to have them enabled in the
project by default.
CONFIG_DEBUG is causing issues on qemu_nios2, see #5743.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The demo can be configured to use different object types for its
synchronization, so test all of them.
The demo can also be configured to work with static objects or dynamic
objects, byt default the demo uses dynamic objects, add a test for
static objects.
Also, the demo can be configured to work with threads of the same
priority or not, so enable both options for testing
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not build for some unsupported architecture and exclude ARM qemu
platform due to bug #5735.
STACK_ALIGN 0x8
MPU STACK GUARD Test
Canary Initial Value = 0xf0cacc1a threads 0x200010e0
Canary = 0x20000240 Test not passed.
***** BUS FAULT *****
Executing thread ID (thread): 0x200010e0
Faulting instruction address: 0x209c
Imprecise data bus error
Fatal fault in thread 0x200010e0! Aborting.
***** HARD FAULT *****
Fault escalation (see below)
***** BUS FAULT *****
Executing thread ID (thread): 0x200010e0
Faulting instruction address: 0x1f4
Imprecise data bus error
Fatal fault in ISR! Spinning...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Evaluate output from sample and record success/failure.
Enable on other platforms, this should not be whitelisted.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We can now send a signal and exit gracefully. This is to maintain
consistency across other runners and samples that can run natively but
do not have a test hook or macro to kill the application in completion.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The output of those samples can be parsed and verified by sanitycheck,
so lets use the console harness for this.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add 2 classes, one to handle the current TestCase scenario, and one more
for handling generic Console with regex matching.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Quite a lot of improvements in the native_posix board
documentation:
* Added TOC
* Reordered
* Given much more emphasis to its limitation
* Added subsection explaining how to overcome some of these
limitations
* Added rationale section
* Added section comparing this port with QEMU and ISSs
* Corrected build example (this port cannot be compiled on
Windows, regression from commit
e62ee6ab3c )
* Added note about it not working on W10 WSL (#5762)
* Several other minor fixes
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Reusing the k_thread structure requires a cleanup of all essential
info. We need to remove the ztest_thread information from the timeout_q.
If left untouched, when a tick occurs the thread's delta_ticks_from_prev
would be corrupted. This inturn causes a chain reaction of problems.
Thus once the unit test is completed the timeout_q is scrubbed.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
When CONFIG_THREAD_MONITOR is enabled, repeated thread abort
calls on a dead thread will cause the _thread_monitor_exit to
crash.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Remove redundant code that clears NRF_RADIO->EVENT_*
registers that are only used in PPI context. Only EVENT_*
registers that are read back need to be cleared.
Relates to: #5753
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit implements the SW-based radio switch for TIFS for LE
Coded PHY S2 in nRF52840 with a single PPI channel and a single
TIMER CC register.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit moves the radio enable on-tick functionality in
function hal_radio_enable_on_tick_ppi_config_and_enable() in
radio_nrf5_ppi.h.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
