Correct that handle is attribute one, print flag to notice cancel
prepared write requests.
Change-Id: I46d747f0466a44460e92fcbaef4e436066c09f4a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The latest NBLE firmware includes a new version
exchange mechanism that is independent from the
RPC function definition. It also allows using
firmwares that are automatically generated by
the official builders without needing a local
build.
The upgrade of the softdevice fixes several
issues in PTS tests. The major change in
term of API introduced by this upgrade is that
upon write requests, the offset and data of the
write request must be sent back to the softdevice.
Change-Id: Ie574047a09a4e6fdcbf775bc98d8a61f981cee0c
Signed-off-by: Louis Caron <louis.caron@intel.com>
This replaces the use of delayed fiber with delayed work which doesn't
require extra stacks.
Change-Id: I3db0c168baabea2503163e26020bf5e4971ce584
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Command Status, Command Complete and Number of Complete Packets are
used for driving TX fibers (HCI and connection). Missing any of
those event will lead to HCI traffic stall.
Priority pool will be used when critical HCI event is received
or normal pool runs out of buffers. The difference with priority
pool is that buffer from it must not be passed to RX fiber and
must be freed from bt_recv.
If driver knows HCI event opcode before requesting buffer for event
it may hint HCI core about preferred pool selection.
Change-Id: Iad14724945bb59721c5ffb6b62d5a8a3e3f70be7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds flags parameter to write callback which can be used to indicate
that data only need to be prepared with use of BT_GATT_WRITE_FLAG_PREPARE
fixing qualification tests that needs to check authorization or other
errors that cannot be verified with just the permissions.
Change-Id: I3d662b2027718ffb52a280e3bbc9750be14f89ae
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the regression of included services in nble.
Because user_data of BT_GATT_INCLUDE_SERVICE points to the first
attribute of service to include, and the bt_gatt_attr_read uses
memcpy, the pointer to pointer is needed to copy the address contained
in user_data to the buffer.
With this patch, included services work on nble as well as Zephyr.
Change-Id: If360014675c399fafc365185d5c1e41c913c8109
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Status shall be stored to be returned in the response to the
on_nble_gatts_write_exec_evt.
Change-Id: I03172e4b8833f83bd9b60f10d3cb52a067cc9f34
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
FIFO object has to be initialized before being used.
Change-Id: I3bd774f60e2585d09cfba657cb2aa50c95e0c2f5
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
If conn is not in BT_CONN_CONNECTED state we get extra reference.
Change-Id: Id78db628e776576ea120bda08e3f906c221015c7
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
According to Core 4.2 Vol 3, Part C, 9.3.12.2,
The Peripheral device should not perform a Connection Parameter
Update procedure within T_GAP (conn_pause_peripheral) after
establishing a connection.
T_GAP (conn_pause_peripheral) is 5 seconds.
Fixes TC_LE_REJ_BI_01_C.
1/3 L2CAP TC_LE_REJ_BI_01_C PASS
2/3 L2CAP TC_LE_CPU_BI_02_C PASS
3/3 L2CAP TC_LE_CPU_BV_01_C PASS
1/3 GAP TC_CONN_CPUP_BV_01_C PASS
2/3 GAP TC_CONN_CPUP_BV_02_C PASS
3/3 GAP TC_CONN_CPUP_BV_03_C PASS
Change-Id: I66bf57a2b8323b748c15f61b2daecfaa435dbb69
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Print debug statement allowing to track bugs with firmware, this also
removing Not Implemented warnings.
Change-Id: I15b77cd6efb5d9bc75910ef444f746c860ac3c6c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
To be reused by on_nble_gatts_write_exec_evt.
Change-Id: I2cb7f3b8e2c33cbede9af3f211e876c4038bef36
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This fixes the condition that has to be checked while writting attribute
value. According to the GATT API, write() callback returns the "number
of bytes written, or in case of an error BT_GATT_ERR() with a specific
ATT error code".
Change-Id: I4268e1d0585f5ce816ad64ca62232b6d739b780a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Update NBLE driver to use the latest firmware fixing the
dependency on the bt_gatt_attr structure size.
Change-Id: Ib93d7d29656028bfb06bbb6ca883816e2a7072fc
Signed-off-by: Louis Caron <louis.caron@intel.com>
on_nble_gatts_prep_write_evt() indicates that this is IPC function
which is not true.
Change-Id: Ic0c5f12136a84abd7b8e6144f7ca67f9b36968fe
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Update NBLE driver to use the latest firmware fixing long write and
updating IO capabilities model.
Change-Id: Iea154f934dd6502fce3960763890ac15492c2952
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove gatts_write_evt() function since it takes conn reference and
forgot to de-reference. Use directly attr->write() instead.
Change-Id: I21737c8feda23ff7df154fcd72327b8ff2d59467
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
With *.h added, the REST processor does not escape it and it thinks is
a non-finished emphasis line (*ddd*). Although the rest generator
should be fixed to escape those things, we don't have the resources to
tackle that and removing '*.h' doesn't alter the meaning.
Change-Id: I6b39551fc8d37d8dd63a68ed70619fc8fb64f2e5
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Now that buffers can contain fragments we should always use the
net_buf APIs to read/write FIFOs and never the nano_fifo APIs
directly.
Change-Id: I203af43e887145a1b14f33a3729ef721fbd46469
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It's common for the rx_queue to be written to in ISR context (by the
HCI driver). This means that if there's lots of data coming in from
the driver the rx_queue might get empty very rarely. With the current
code this means that the rx fiber might end up not yielding to other
higher priority runnable fibers for long durations (as long as there's
data in the rx_queue).
To solve the issue, call fiber_yield() explicitly after each processed
buffer from the rx_queue. This way we give other fibers a chance to
run even if there's a heavy flow of data from the Bluetooth
controller.
Change-Id: Ib3dbe6536a62360ad5153ed12eee8489645e4109
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is similar to previous patch which makes the API much more simple
when handling long writes.
Change-Id: Ibd3856863a43927195e23936872a160d5ff94648
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use the more explicit net_buf_get_timeout() call where it makes sense
(e.g. where we always want to wait or never want to wait).
Change-Id: Id1eabe0ad2f9fa79f7be39e51fefa5161f9cc550
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Check that callback is defined before call, fixes issue in
on_nble_sm_status_evt calling cancel callback.
Change-Id: Ie2f49ed6e441f4260dacd16120e09f892c1fd528
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Currently enable procedure can be called only once regardles if it
failed or succeeded.
Change-Id: I3869e97442720860baba7bb1b7610738ca95561a
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Using atomic flags instead of bool allows adding new states easily
without aditional memory footprint.
Change-Id: I0289a49af8353dc832a33e16ebdd6651c3913fe3
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Remove NBLE_GAP_SM_EVT_START_PAIRING handling since this is handled
now in the special pairing event and defer negative status handling to
the actual event code processing.
Change-Id: I232d9e5ecd09b2600df3ff04128dfb7f71a2eae2
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Implement bt_smp_auth_passkey_entry() and bt_conn_auth_passkey_entry()
functions to be used by apps and tester.
Change-Id: I600284334c67840dd0c17991596ad31986bf0afd
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This moves SMP related code to smp.c making code similar to the tree
of firmware developers.
Change-Id: I5b43dcbe40a721e11b64cbdd4203406e721f40cd
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
There is no need for struct bt_storage being modified by stack.
Change-Id: I732cf94983a29de40d692e802d6a71b8986708df
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Update RPC to the newest RPC introducing some security improvements in
the firmware.
Change-Id: If031bb13927d63e029fcc6da34051257d13632a5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Convert leading whitespace into tabs in Kconfig files. Also replaced
double spaces between config and <prompt>.
Change-Id: I341c718ecf4143529b477c239bbde88e18f37062
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Defer Prepare write errors to be sent in Execute write response
Per Bluetooth Spec. The Attribute Value validation is done when an
Execute Write Request is received. Hence, any Invalid Offset or
Invalid Attribute Value Length errors are generated when an
Execute Write Request is received. Fixes test case
TC_GAW_SR_BI_33_C (run with shell).
Fixes: ZEP-218
Change-Id: I3dc4583f519e0da2e1f741c9b532d6a6c1970225
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This fixes GATT Server indications.
conn handle shall be set to the valid handle, not 0xffff.
If conn passed to bt_gatt_indicate is NULL, indication will be sent
to every client subscribed.
Fix related to ZEP-403
Change-Id: Ie36b957fddfbc5485318bba649d15349e9293868
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Print flag for write_evt() to distinguish between write and
prepare_write. Add offset printing when reading.
Change-Id: I8b53d8f49657ade39b190ab33e99097bb172077c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Attributes should have stored their own attribute handle after
registering service. Handle values are assigned to attributes after
registering service and stack has to copy them.
Fixes:
GATT TC_GAD_SR_BV_03_C PASS
Change-Id: I8463340960d663161d0f7990390e60f06a1c7259
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Firmware does not filter by UUID so we need to do this ourselves.
Change-Id: I55808836369194fbc5ea7c35db2c72fcda75e4eb
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This is actually a revert from a previous revert. This updates RPC
following the very recent firmware development.
This reverts commit a146f9ef28.
Change-Id: I67b517c3959b5b78a5ef80fbb338d6cc66e43e8e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Call bt_conn_security() the same way it is done in upstream code for
NBLE. Currently use BT_SECURITY_MEDIUM as default sec level.
Makes at least following cases pass:
...
1/6 GATT TC_GAR_CL_BI_05_C PASS
2/6 GATT TC_GAR_CL_BI_17_C PASS
3/6 GATT TC_GAR_CL_BI_22_C PASS
4/6 GATT TC_GAR_CL_BI_27_C PASS
5/6 GATT TC_GAR_CL_BI_33_C PASS
6/6 GATT TC_GAW_CL_BI_06_C PASS
...
Change-Id: I2a0c177a187db931e88e2f82a5bda1c0cc04a112
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This adds a notify_le_param_updated function to call registered
le_param_updated callbacks with new connection parameters.
Change-Id: Idd660f7ca024c2f7712a6a41a51db77e4fc82a00
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This issues connection parametrs update on new connection event,
to mimic Zephyr stack behaviour.
Change-Id: Ic3fa86a02ff9a5135a026dfff6d2fbfb890656c1
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds implementation of bt_conn_le_param_update function.
Connection parameters can be only issued while in slave role,
because, nRF51 supports this procedure over L2CAP only.
Closes ZEP-222.
Change-Id: I2bb5f718b60b8be279f333c9721629662c029a32
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
on_nble_gap_conn_update_evt gives information about new
connection parameters. These shall be stored in conn.
Closes ZEP-222.
Change-Id: I69e36136cfae98821b1f5467c72c94dbc6f1d10f
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This function will be used by bt_conn_le_param_update to validate
parameters.
Change-Id: Icd60d74dae3bf467af4b7277d1516b978ba937a5
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
According to the data from nble_gap_connect_evt,
role_slave is "0 if connected as master, otherwise as slave",
so to be consistent with our API, this shall be mapped to
either BT_CONN_ROLE_MASTER or BT_CONN_ROLE_SLAVE.
Change-Id: Icf31ef02ea178e04cb28b2611e09b06c23f49704
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
gatt_private should be reseted whenever used otherwise other commands
may fail when attempt to use.
Change-Id: I8bdda3d5136368a8f37fd9e2afd97e0957c4e04e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes bt_gatt_write similar to bt_gatt_read where the parameters are
stored in a struct which can be used to store intermediate values while
the operation is in progress.
Change-Id: I3c62af137b99985690cf88dcc37a977a0be891f5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Due to the recent changes, read parameters pointer is passed as user_data,
not as gatt_private.
Change-Id: I08b59164acfec8d71801ae2a23ce51abad080dc8
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Revert to RPC to BLE Radio Module 0425 as it is going to be official
open source release beta.
This reverts commit a52d7d7fe0.
Change-Id: Ibdb98b26bcad0a04849e89622527884a2b67c8d4
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixes using uninitialized structure nble_gattc_write_param in
nble_gattc_write_req().
Change-Id: I476a3b833994c422691bf96dc0b2174368c47fa6
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Since RPC to the Nordic BLE module has no flow control increase
receive buffer pool to handle events from the module. Without this
NBLE stack is not capable of handling all events and we get "No
buffers" error message.
Change-Id: I0566b30a95ef0a027d4533c83c3c2915018a650a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
on_nble_gap_connect_evt() gets called in a case of incoming connection
but also with outcoming one. In this case connection is already
created so we should use conn_get() instead of conn_new().
Change-Id: I2ed2d0a1844f653000a12eb0f54f52533856bf0d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Update RPC following major RPC update in firmware.
Change-Id: I4094b94319359a59164ac69394937ac1472b8cbe
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
set_ad() already checks for length==0 so there is no need for
checking if sd is valid.
Change-Id: Idc0ce9135eca56a1e8057f3a2129adb0b5e5ddd7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Getting params from user_data seems to work now.
Change-Id: I81bccea9aa6994d3c09a3ff03a49fa6767e7305e
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
In on_nble_gattc_discover_rsp conn->gatt_private is set to NULL prior
to calling this parser functions. This fixes this issue by passing
discover params pointer to these functions.
Change-Id: I6669cb0d16dc65d532e17f96ceb9cd94dbe6ce08
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Updating function names prepares for firmware RPC update, to this
moment only names changed.
Change-Id: I8d19e83c5c88a4b41ed803e276652eb15e0d87b1
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
There's no need to drain twice if NRF51_PM is enabled, the draining
shouldn't use rx_ready(), and it should happen after disabling
interrupts. Also rename uart.h to util.h to avoid conflicts with
include/uart.h and remove the left-over ISR prototype declaration.
Change-Id: Id38110dd38cf48edfe4a7b8e2e68cd358a9aa5ea
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update function names following firmware name changing.
Change-Id: I8b42c4d9f5c892abec10d8653544c3e03e4ee80d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
It's possible that there's a queued event from the nRF51 at the point
where we start resetting it, resulting in the stack receiving two NOP
events. To prevent this, make sure to drain the UART while the
controller is in a powered off state.
Change-Id: Ic009e11c11ac750fc76c881c0ffe9bd12d38da0a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of requiring application to provide both advertising type
and address type used just require app to provide info if advertising
is connectable or not. Advertising type is set based on provided
SCAN_RSP and local privacy support.
When local privacy is enabled it is no longer possible to advertise
using identity address. If such feature is to be required later on
advertising options can be extended.
This gives BT stack full control over what type of address is used
for advertising and is a preparation for random address rotation
and OOB support.
Change-Id: I90e9a683ef3794f155707343c874f75585439325
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
In a case connection is not known implement notification for all
connections the same way it is done for HCI stack. Attribute database
is scanned for CCC attribute and notifications are sent to all
connections.
Change-Id: Id556b4aa5af124aea672891ca89b278c71519643
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use similar to HCI stack cfg structure to keep value.
Change-Id: I54cf731971c5e2822385dc8eb295ce9951969af6
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Save peer address to use it with bt_gatt_notify()
Change-Id: Ie5e3af4cdc2d225c9572e010359f59323ae493a7
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Private gatt data from connection is indicator if another operation is
pending. Some att commands may be called within discovery callback
like subscription on ccc (within characteristic discovery procedure).
Without clearing conn private gatt data member, leads to rejection of
called in callback att command due to being "busy".
Change-Id: I72a35ed82dac2f0538f2d1637163bd2302f0b072
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This callback is needed to successfully perform write operation.
Change-Id: I09776dda16dac639320a7e83a66e7a9b31ebea6a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
conn object pointer has to be passed to the write callback instead
on NULL pointer.
Change-Id: Ifde88be0a43bcd9e1acbe11b16512776cd18fc66
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
If attribute has no write callback, BT_ATT_ERR_WRITE_NOT_PERMITTED
error shall be returned.
Change-Id: I9277f8682597ee7f93a1267d2de31b3cc245f1cd
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
* service include macro definition takes reference to
first service attribute of the included service
Change-Id: Ib2b1defe2c99aea738da791af74a534d56025eae
Signed-off-by: Roger Lendenmann <roger.lendenmann@intel.com>
Add debug for bt_gatt_notify() and print parameters in
on_nble_gap_conn_update_evt().
Change-Id: I5b61b5dbf508a2ee8e0b79c8636bc2dc710fb2ef
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Since the header was updated type cast is not needed.
Change-Id: I6a232cd8515fb48ef2a0d16cc064effac7b80bfd
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Now that there's a helper for clearing nRF51-side bonds we can use
that in bt_storage_clear().
Change-Id: I9eea4b100834b150e7c55a5141f1624853335c0a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To ensure reliable behavior when pairing we need to clear the nRF51
persistent memory upon init.
Change-Id: I204bb27e7c6e33dc5dd006ad9937645e907e770f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The nble firmware supports a max ATT MTU of 23 (i.e. the default).
Change-Id: I70f55b00b50b2ad6540850d594a6d2fb89b11d1a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We should be looking up the appropriate connection object and passing
that to the callback.
Change-Id: I04620b301541c8bda45f20e2b1dcca8f71562821
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We need to reset len to 0 in case of failure to prevent the nRF
firmware from reading past the end of buffer. At the same time clean
up the code a bit.
Change-Id: I2ac9a86e0f7704ae55c9b2758e02dfadf650f549
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update RPC to Nordic BLE radio module to 0425 revision.
Change-Id: Ieb79821acd5a8fbc4358ea5e1f258834a7932c2c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Do not depend on specific implementation of the driver, use
well-known driver name used across multiple IPs.
Change-Id: I823fcfa01ce1484dd89f6ade8fbe7017f2084bc6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is more of a convenience to let the driver identify itself in
debug logs and the monitor protocol.
Change-Id: I73351477e98d45d6344c180b8088bde29df6f7d9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bus that we notify over the monitor protocol is really driver
specific, so let each driver specify their bus type.
Change-Id: Ic3a086fcc06352dbf051e52cef5bf6b8696349ae
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove handling not used and obsolete function prototypes.
Change-Id: I6086f2e13efe7fc219f237dda710a545bec07612
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Update RPC adding gap_tx_power request and event. Corresponds to BLE
version ATLASEDGE/PVT/FACTORY-386-gc1f694b.
Change-Id: I7e47553af63c3c3405522e37f86d9004dcca46f7
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixes compilation with debug for drivers h4 and h5
Change-Id: Ia09ce0a5ca3d684a4f9d25fdfe8530e80a46afac
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This prepares for adding other debug types besides the printf-style
logging to the console.
Change-Id: Ic2ed305192491734da991c4f61fdaace03fd60f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some controllers will emit an initial "NOP" Command Complete event
during initialization and expect the host to only send commands once
this event has been received. This patch adds a new Kconfig option to
be used in the case of such controllers and defaults this to true on
Arduino 101 with the H:4 driver where this behavior is currently
observed.
Change-Id: I440f14a7c07ac27545febf9f85ebcc343e2a4558
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This fixes conn->gatt_private = NULL pointer dereference that occurs
in the next Read Blob Response, here:
/* TODO: Get params from user_data pointer, not working at the moment */
params = conn->gatt_private;
Change-Id: Icf280c856133a4c91fc10475d3a047809f917f46
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
If incoming pairing request would result in JustWorks pairing this
can be used to request consent from user for accepting it.
Change-Id: If0695d0e1bb010bade6a16abe1b57a2ce07856cc
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Parse include function intention is to return last parsed included
service handle. Next discovery iteration of included services should be
started from last found included service handle instead of end handle
from included handle value (which contains attribute handle of included
service declaration and the end group handle, BLUETOOTH SPECIFICATION
Version 4.2 [Vol 3, Part G], 4.5.1).
Change-Id: I73fe4027cb616242e838ea54c61b7780f1838e52
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
If on_nble_gattc_read_rsp returns an error, this error shall be
passed to the application to let know that Read Request/Read Blob Request
was aborted due to ATT error received.
Change-Id: I0efe26ec90fe27a1ab3c791e555ebe682927ab57
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
The Read Response only contains a Characteristic Value that is less
than or equal to (ATT_MTU – 1) octets in length so, condition
(length < bt_att_get_mtu(conn)) is always true, and the full
Characteristic Value will not be read.
Change-Id: Ib18fbedf277c880dc5cf0ce21fd7d550d12a64ef
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Add read multiple attributes request and response. Update RPC version
to niko-0412.
Change-Id: I5dfd99a1b8af866b69eae230ad24304eafccab4d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
So far the assumption has been that the host stack manages all
incoming and outgoing buffers. For the incoming buffers (from the
controller) this has required hci_core.c to manage its own pools and
do the host flow control. This setup makes perfect sense for an
architecture where the controller resides remotely on a different CPU
& address space (i.e. the "traditional" HCI transport case).
When the stack runs on a system where the controller resides in the
same address space this setup doesn't work that well. In such a
scenario the incoming buffers are ideally created as low down in the
stack as possible (i.e. below HCI), which means that the current
hci_core.c cannot be responsible for managing their pools.
To allow for both types of architectures this patch introduces a new
BLUETOOTH_HOST_BUFFERS Kconfig option that can be selected to say that
host-side management is desired, or deselected to say that the
controller (residing in the same address space) takes care of managing
the incoming buffers.
So far the incoming buffer types were identified by hci_core.c by
looking at their "free pool" pointers, however as soon as the pools
are allowed to be somewhere else this doesn't work. To solve this we
now require a minimum user data size for all Bluetooth buffers and use
that to store the buffer type.
Change-Id: I14bc32007e3e3f17c654f71f79b520650028d7ce
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Without this conn.c will cause logs whenever BLUETOOTH_DEBUG is
enabled.
Change-Id: I03f7d6b5b37e05ca23cba20536b24dbdb850304d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The previous enable/disable API implementations weren't actually what
their names implied, but simply gave the right result for the
initialization scenario when called after each other. Split these into
proper init/enable/disable APIs which do the exact thing that the
names imply.
Change-Id: I09a930d3607f4919ecd889ec3ee4ba8d7b12ee36
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Clarify the name of the option and add a dependency to Arduino 101
which is the only known board that is currently known to need it.
Change-Id: Ibfb96cba202f34464b45b922da599da70c038d12
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This function is needed to get next attribute of passed to function
attribute.
Change-Id: Iefe2015f2d6bcb650012b1f9d5b1ea98e8fa8f48
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
When Nordic BLE chip is flashed with HCI firmware use H:4 UART driver
and enable chip the same way we enable for NBLE.
Change-Id: Ie14734266803088feadb0d0eb20c49c3615f0267
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The nble nRF51 firmware cannot handle situations where it receives
data before it is ready. The RPC calls otoh cannot be blocking.
Combine this with the fact that bt_enable(NULL) is supposed to be
blocking means we cannot support this mode of operation with nble.
Change-Id: Ib9c2c322b44b04bc48be243c2ba1c1bc4becb8ea
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Refactoring Power Management related code to special file nrf51_pm
making it possible to reuse the functions for H:4 UART driver when
Nordic BLE is flashed with HCI firmware.
Change-Id: If389c1f4af13fa786e5866129624527cec0928e0
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The config option handles enabling, disabling and power management
operations with Nordic nRF51 BLE chip.
Change-Id: I816062a7fb17c9e57c234113a2cecdebceb407b6
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move NBLE code to the place where other Bluetooth drivers code resides.
Change-Id: Ibcf9ffb016e9b842bed66a61dff5c101b1573aaa
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
There are two major issues with the kconfig:
() Some of the config options have incorrect dependencies inside help
under menuconfig. For example, CONFIG_GPIO depends on BOARD_GALILEO.
() Since the SoC and board specific kconfig files are parsed first,
the help screen would say, for example, CONFIG_SPI is defined at
arch/arm/soc/fsl_frdm_k64f/Kconfig. This is incorrect because
the actual config is defined in drivers/spi/Kconfig.
These cause great confusion to users of menuconfig/xconfig.
To fix these, the SoC and board defaults are now to be parsed last.
Note that the position swapping of defaults in this patch is due to
the fact the the default parsed last will be used.
And, spi_test is broken due to the fact that it requires
CONFIG_SPI_INTEL_PORT_1, but never enables it anywhere. This is
bypassed for now.
Origin: refactored and edited from existing files
Change-Id: I2a4b1ae5be4d27e68c960aa47d91ef350f2d500f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This moves both the Bluetooth HCI and NBLE drivers under
"Bluetooth Drivers" category. This also adds a selection for
choosing Bluetooth stacks as the bulk of both HCI and NBLE stacks
cannot be compiled together.
Note that this does not move the source files. That should be
done in a separate change.
Change-Id: I32fa7097ada0fdc52bcc745adb78c7273f4023c6
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The helper for analyzing (fiber) stack usage is in no way specific to
Bluetooth and will likely be of use to many other places as well. Move
it therefore to include/misc.
Change-Id: Iedb699dbe248aca305e387998d37bb339cfb0e21
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch replaces all occurences of the macro DEV_INVALID_CONF by
-EINVAL at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/ when applicable.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: Idae0d5af8dd780416977c9261a5fb6188c3aab64
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_OK by the actual
value 0 at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I69980ecb9755f2fb026de5668ae9c21a4ae62d1e
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
The peripherals utilizing UART were required to register their own
ISR rountines. This means that all those peripherals drivers need
to know which IRQ line is attached to a UART controller, and all
the other config values required to register a ISR. This causes
scalibility issue as every board and peripherals have to define
those values.
Another reason for this patch is to support virtual serial ports.
Virtual serial ports do not have physical interrupt lines to
attach, and thus would not work.
This patch adds a simple callback mechanism, which calls a function
when UART interrupts are triggered. The low level plumbing still needs
to be done by the peripheral drivers, as these drivers may need to
access low level capability of UART to function correctly. This simply
moves the interrupt setup into the UART drivers themselves. By doing
this, the peripheral drivers do not need to know all the config values
to properly setup the interrupts and attaching the ISR. One drawback
is that this adds to the interrupt latency.
Note that this patch breaks backward compatibility in terms of
setting up interrupt for UART controller. How to use UART is still
the same.
This also addresses the following issues:
() UART driver for Atmel SAM3 currently does not support interrupts.
So remove the code from vector table. This will be updated when
there is interrupt support for the driver.
() Corrected some config options for Stellaris UART driver.
This was tested with samples/shell on Arduino 101, and on QEMU
(Cortex-M3 and x86).
Origin: original code
Change-Id: Ib4593d8ccd711f4e97d388c7293205d213be1aec
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of returning a 'void *', the nanokernel fiber_delayed_start()
family of routines now return a handle of type nano_thread_id_t.
Consequently, the nanokernel fiber_delayed_start_cancel() family of
routines now accept a parameter of type nano_thread_id_t instead of
'void *'.
The complete list of affected nanokernel routines is:
fiber_delayed_start() fiber_delayed_start_cancel()
fiber_fiber_delayed_start() fiber_fiber_delayed_start_cancel()
task_fiber_delayed_start() task_fiber_delayed_start_cancel()
Change-Id: Ibd4658df3ef07e79a81b7643a8be9ea5ffe08ba0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
It's not a function and requires all its arguments to be build-time
constants. Make this more obvious to the end user to ease confusion.
Change-Id: I64107cf4d9db9f0e853026ce78e477060570fe6f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Mostly SoC initialization and some kernel subsystems, but also some
device drivers like the interrupt controllers.
Change-Id: I8dc1844c33acd877c075b6b03558fdca6f87500b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This is the last step before obsoleting DEVICE_DEFINE() and
DEVICE_INIT_CONFIG_DEFINE().
Change-Id: Ica4257662969048083ab9839872b4b437b8b351b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_DEFINE() so that it fits in the 'device' namespace.
Change-Id: I3af3a39cf9154359b31d22729d0db9f710cd202b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_INIT_CONFIG_DEFINE(), because (a) it was not fitting
in any namespace and (b) it is not used to declare, but rather define a
object.
Change-Id: I1da5822f06b85a9fb024b5b184afd0ccc01012ec
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Adds extern "C" { } blocks to header files so that they can be
safely used by C++ source files.
Change-Id: Ia4db0c36a5dac5d3de351184a297d2af0df64532
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
In ISR context we receive NULL when there is no free buffers available.
Add handling similar to H4.
Change-Id: I9c1c2784ceaf31a1b2f9433b142a342e8dcdbc3e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move rx state to the h5 struct and use a commmon h5_reset_rx() helper
to reset it.
Change-Id: I92af740ae26b443460531b7200dbb0e64fb11d64
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The handling of SIGNAL and PAYLOAD states is exactly the same. Just
remove the other one.
Change-Id: Id82524812919658c6b1df76a7081c826aaf3df34
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When packet is retransmitted we need to recalculate sequence number
since it is not stored in the packet buffer.
Change-Id: Id389fa814e82cfd5e39afba1eaeaa79fc9e337f1
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In a case of unexpected SLIP_DELIMETER we need to discard remaining
bytes in UART and start from beginning.
Change-Id: Ib13a885cc1a4a188057c587e9974aff1d90594c3
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The interrupt API has been redesigned:
- irq_connect() for dynamic interrupts renamed to irq_connect_dynamic().
It will be used in situations where the new static irq_connect()
won't work, i.e. the value of arguments can't be computed at build time
- a new API for static interrupts replaces irq_connect(). it is used
exactly the same way as its dynamic counterpart. The old static irq
macros will be removed
- Separate stub assembly files are no longer needed as the stubs are now
generated inline with irq_connect()
ReST documentation updated for the changed API. Some detail about the
IDT in ROM added, and an oblique reference to the internal-only
_irq_handler_set() API removed; we don't talk about internal APIs in
the official documentation.
Change-Id: I280519993da0e0fe671eb537a876f67de33d3cd4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This API is not being used for anything, the interrupts for UART
drivers are all being configured statically. Saves code space as
gc-sections can't tell that these APIs are unused.
Some instances where IRQ/priority information was being saved in
data structures and never used fixed.
Change-Id: If56b4fdc251b80be9094ffcbac6f61e265ac2ffd
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Changes the nanokernel FIFO API so that the timeout parameter must be
specified when invoking nano_isr_fifo_get(), nano_fiber_fifo_get(),
nano_task_fifo_get() and nano_fifo_get().
This obsoletes the following APIs:
nano_fiber_fifo_get_wait()
nano_fiber_fifo_get_wait_timeout()
nano_task_fifo_get_wait()
nano_task_fifo_get_wait_timeout()
nano_fifo_get_wait()
nano_fifo_get_wait_timeout()
Change-Id: Icbd2909292f1ced0bad8a70a075478536a141ef2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Using number_removed to find out how many packets from unack queue we
need to clear.
Change-Id: Icad948892f3ab1febc939e9ba6d6b3431973633e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
We might get out of sync packet because of race collision, drop it.
Change-Id: Ic84a760199df1520dc7a95383972f9ec428c7fde
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Analyze stack when sending single ACK packet.
Change-Id: Ifd3a54f0d1ad9a644363563fa9b8bea05b895fa9
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If there is no packet to be sent after timeout we have to send ACK for
last received packet.
Change-Id: I30bbc4ae1a257f9a7351dc5a5d2f1269740ce447
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add initial code for three-wire (H5) Bluetooth uart driver.
At the moment the driver is EXPERIMENTAL. To test use following
method with qemu:
Run btproxy with three-wire emulation patches:
$ sudo tools/btproxy -d --pty -3
Opening pseudoterminal
New pts created: /dev/pts/21
Opening user channel for hci0
Notice that new device created: /dev/pts/21, use it with qemu -serial
parameter.
Run qemu target with following parameters:
$ make qemu 'QEMU_EXTRA_FLAGS=-serial /dev/pts/21'
Change-Id: I51579ffd8088583df9106689a03b2a0b4aa9e4cb
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove extra line and correct style according to common style.
Change-Id: I5fc9434edce44e52b51fc40866638c0899985b1b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Needed headroom depends on type of the UART driver, change it
accordingly.
Change-Id: Ic9bf5f08a49be6823fce5eff8139d5f949b313ca
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Now that the HCI driver is called H:4 use the shorter driver-specific
prefix h4_* for its internal symbols.
Change-Id: Icdab1147e5ec31f84e0a3d810192ddd462f4dfdd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We'll in the future also have a three-wire UART (H:5) HCI driver, so
the current H:4 driver cannot have a generic name.
Change-Id: Id326ae63d6f4d273d0d0c6120143e2f8d62968d1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Make newline part of log macros so that caller doesn't have to
append '\n' every time logs are used. This make sure that no
log will be missing new line which results in concatenated log
messages.
Change-Id: I3231ae747c790816dbc1608e0a3bd56467ba0a1b
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Removes the 'priority' parameter from the IRQ_CONFIG macro.
This parameter was not used anymore in any architecture.
The priority is handled in the IRQ_CONNECT macro.
The documentation is updated as well.
Change-Id: I24a293c5e41bd729d5e759113e0c4a8a6a61e0dd
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Use device name to find the UART device for Bluetooth usage,
instead of relying on an arbitrary index.
The default device names being used are derived from the original
board.h for each platform. Some of them point to the same device
as UART console. Since this is a Kconfig option, the default
can be overridden so this is not a serious issue.
Change-Id: Ibe82f3968e72ba60f9c033aa3dfcb2fb3c41dc75
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove the call to uart_init(), and let the UART drivers take care of
the port initialization.
Change-Id: Ibeca65b3fe64feb7a203a793c01c525ff5e6afda
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Put initialization priorities as device driver Kconfig
parameter.
Initialization priority value for each platform is defined
in the platform Kconfig file.
Drivers and platform code use SYS_DEFINE_DEVICE to add
and initialization function.
Change-Id: I2f4f3c7370dac02408a1b50a0a1bade8b427a282
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The driver should handle the initialization instead of relying on
platform initialization. This is to conform to the driver model.
Change-Id: Idc95d59bce2470b5118e416ee05f07548991a15c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There's no need to do manual minumum calculation when there's the
min() helper available.
Change-Id: I4d5cfb088d9e6499750664680419ab4beb56e0d5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We can remove the need for the extra 1-byte headroom by simply
directly writing the H:4 header with uart_poll_out(). Also the
separate uart_out() function can be removed by taking advantage of the
counters already present in the net_buf.
Change-Id: I54bd852e28f416b3de250cd9f8a126269cccfc14
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We know the needed values at build-time, so there's no point in having
a runtime mechanism of accessing them in the code. Having the values
as defines makes it e.g. possible to use them as input for defining
the size of buffer pools.
Change-Id: Ib7556644719bfb631e638fa5bf29f3d1747a5072
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It is more intuitive to assume that the driver send() consumes (takes
ownership) of the buffer given to it.
Change-Id: I53d9cbebc0564d1d11110fc78a62ce0bbb3cdfd2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Flags allow passing IRQ triggering option for x86 architecture.
Each platform defines flags for a particular device and then
device driver uses them when registers the interrupt handler.
The change in API means that device drivers and sample
applications need to use the new API.
IRQ triggering configuration is now handled by device drivers
by using flags passed to interrupt registering API:
IRQ_CONNECT_STATIC() or irq_connect()
Change-Id: Ibc4312ea2b4032a2efc5b913c6389f780a2a11d1
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Even if a buffer can't hold the needed amount of data we should still
cleanly discard the bytes so that the driver doesn't loose sync of the
next packet boundary. This way we also get to remove the now
unnecesary 'failed' label.
Change-Id: Ic921fbf6c0ddef4a7721cee7fa3e01a31b127778
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The space that the HCI driver needs to reserve for its own use is not
necessarily symmetrical. E.g. even with the current H4 driver we only
need to reserve space for sending data but not for receiving it.
Keeping track of these values independently enables more efficient use
of the buffers.
Change-Id: I64917b545c5cd77356ed038d09afe76422334661
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that we have the buffer type enum as part of the HCI driver API we
can take advantage of it to pass the buffer type information and not
have to have two separate callbacks.
Change-Id: Ib2ee5b1540e532c9b27903e97660a276c1293fbc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way we avoid dealing with the specific buffer type value and to
make it clear that these are for drivers onle.
Change-Id: I8aef7ec6a767b2fa68cbe374eb371e2a6192f675
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is a necessary step in preparation for removing the buffer type
information from the buffers.
Change-Id: I29d8fae32aa660416a1c12e87840499c711e659f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It's invalid to try to send HCI events to the controller so we should
treat such buffer types as invalid in bt_uart_send().
Change-Id: I4108a158d5b91f364a9f3c56e3037f03755daa19
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To avoid unnecessary stack variables and to simplify code, add helper
macros to access the Bluetooth specific ACL and HCI user data that's
part of the buffers.
Change-Id: Idc337537721115c4091982c04f8a05bbbf0d5a19
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>