Fix missing Auxiliary PDU when primary PDU is calculating
the offset. Schedule the auxiliary PDU ticker before primary
PDU ticker is scheduled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the Low Latency Prepare Done that disables ULL_LOW
context executions inside a radio event, so that
ticker_job_idle_get is invoked from ULL_LOW instead of LLL
context so that its enqueued alongwith others scheduled
in ULL_LOW. This is avoid premature disable of ULL_LOW
context executions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When Privacy is not supported in the build and Advertising
Extensions is enabled, HCI LE Enhanced Connection Complete
event was missing. This is fixed now.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect adv_addr type in auxiliary PDU when address
is removed from primary and added to auxiliary PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to calculate the window widening for
the reception of auxiliary PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix to avoid a crash due to missing aux_ptr in current
primary PDU constructed by LE Set Extended Advertising
Parameter Set, while aux_ptr was populated by LE Set
Extended Advertising Data Set in the latest double buffered
PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to handle updates to adv mode and event
properties of an already created advertising set.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix collision resolution to consider single-shot ticker,
current single-shot with ticks_slot as older that a next
periodic or single-shot ticker with ticks_slot.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticker to correctly generate the operation callback if
single-shot ticker fails to be scheduled and does not
expire.
As the collision resolution is deferred to the worker, if
a single-shot ticker is cancelled, then appropriately call
the operation callback with failure status. This is allow
the user to take necessary actions, like release resources
allocated that need to be release on the failure to schedule
the single-shot ticker expiry.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the definition of PKT_US into pdu.h so that it can be used
by Advertising Extensions implementations too.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove us_radio_rdy field in the footer structure as its always
a constant value which can be obtained using a functional
interface to HAL.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix legacy advertising started using Extended Advertising
sets to use the set advertising random address.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing reset of phy struct member for scan set that is
not being enabled by use of LE Extended Scan Parameter Set
command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Allow use of HCI LE Set Random Address cmd when advertising
is enabled using Extended Advertising commands.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix, use phy variable instead of type to determine if
scanning on Coded PHY is to be enabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to generate LE Extended Advertising
Report for received legacy PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing reset of scanner state which could cause a
spurious SCAN_RSP packet without a prior SCAN_REQ being sent
to be reported.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to support setting of legacy
Advertising Data and Scan Response Data using Extended
Advertising Data set functions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Differentiate call to ll_adv_params_set, whether used by
legacy LE Set Advertising Parameters or LE Set Extended
Advertising Parameters.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable Advertising Extensions features in the controller
when enabled in the Host in combined host+controller based
applications.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update implementation of periodic advertiser's LLL to
correctly handle event counter values when latencies
introduced due to sync events cancelled by active events
operating in unreserved time space.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update implementation of master and slave LLL's to correctly
handle event counter values when latencies introduced due to
connection events cancelled by active events operating in
unreserved time space.
When an active radio event extends into unreserved time
space, and a connection event prepare is scheduled but at
the time of pre-emption timeout if the connection event is
cancelled then the event count and latencies needs to be
continiued to get acummulated.
In the current controller usecases the above scenarios does
not get exercised, the changes in this commit is needed for
future roles that can extend into unreserved time space and
would cancel a scheduled connection event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix conditional compilation of advertising extensions and
periodic advertising do that platforms with not support in
their LLL can be built without advertising extensions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix conditional compilation of piggy back implementation.
This code should be deleted once periodic advertising
implementation is complete.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor to reuse common repeated code in ISR that reset
status, and performed abort, done and cleanup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to support ADV_EXT_IND PDU with AuxPtr.
Changes in this commit only prepares the ADV_EXT_IND PDU
in the primary channel.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated the shell commands related to Advertising Extensions
to call the LE Set Extended Advertising Data command
functional interface for testing purposes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added debug information print outs in HCI code related to
Advertising Extensions events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for Bluetooth Controller GPIO Debug Pins for
nRF5340 PDK board. GPIO Pin toggling can be captured on the
P3 pinhead of the PDK.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Previous mode store function only can store single data,
change this to store as KV model, let's app-layer to manager
model data, other than by stack when node reset.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
Any CoAP implementation when use at least block transfer or is a server
side need access some CoAP options as integer values. This add a method
at public interface and defines for block wise operations to avoid code
useless code duplication.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The extern array declaration of size 0 gives a warning when
compiling with GCC. Updated to use [] rather than [0].
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
The extern array declaration of size 0 gives a warning when
compiling with GCC. Updated to use [] rather than [0].
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Initialize LittleFS at POST_KERNEL and not at APPLICATION stage.
When using LittleFS as settings backend for OpenThread, LittleFS needs
to be available when net_init is performed.
Arguably, FS is an OS kernel component that should be ready when
applications are starting.
Possibly, the same change should be applied to FAT fs as well.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Port advanced scheduling implementation from legacy
controller.
This implementation schedules
- non-overlapping scan window when there are simulataneous
central connections active
- central connection establishment with similar connection
intervals be placed in a non-overlapping group, temporally
- connection parameter request with calculated window offset
hints to have non-overlapping BLE radio events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a function to reset the variable holding the connection
context of the currently active Connection Parameter Request
Procedure.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
It add an option to configure openthread thread priority class
by the application if there is a such need.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
The SET_ERRNO() macro does nothing if a positive value is provided
to it, and the functions were not returning -1 or setting errno
as expected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
APIs were returning -1 without setting errno if the file
descriptor looked up a null object or there was no function
installed in the vtable. Set to EBADF for this case.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Net pkt is added into the ot net list after queued net pkt into
the net_rx which bases on it. It affects in losting net pkt when for
instance ot thread is preemptive.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
The eth_stats_update_errors_rx() implicitly assumes that passed pointer
to struct net_if is not NULL.
This is not true for MCUX's eth_rx() (in eth_mcux.c), where we can
execute eth_stats_update_errors_rx() after net_recv_data() returning
-EINVAL because of passed NULL iface pointer.
This change fixes this problem with adding extra check on iface not
being NULL before it is dereferenced.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This change fixes routing for routes when the nexthop is a link-local
address of a connected peer.
The issue was that nexthop was correctly set from the routes, but the
code did not detect that the nexthop address (link local of the pc on
ppp interface) was on the ppp interface, because
net_if_ipv6_addr_onlink() only evaluated the network prefix and not
any other information (like the nbr list).
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
This change adds new, optional switch to 'net ping' command - to
be more specific the '-I <iface index>', where the <iface index>
is the number of supported network interface.
One can discover this number from the Zephyr shell after running
'net iface'.
The default interface stays the same - just the switch is added to
override the used interface for 'net ping' invocation.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Cleansession is hardcoded to 1 but some use case might require 0
to make the sessions persistent (ie get messages sent while the
client was offline)
Signed-off-by: Xavier Naveira <xnaveira@gmail.com>
The current code truncates the size_t block size to a u8_t, which
causes a 256 or 512 byte block size to be truncated to zero and
passing the size check.
Check as a size_t then truncate once the check passes.
Signed-off-by: Michael Hope <mlhx@google.com>
Address the nRF5340 Engineering A Errata 16, RADIO: POWER
register is not functional.
This affects the dependency of controller's HAL
implementation that expected correct reset values being
set in the Radio peripheral.
As the SUBSCRIBE_TXEN and SUBSCRIBE_RXEN where not in their
reset value, Radio transmission and reception start using
DPPI was broken.
Fixes#25942.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This PR enables the user to configure the maximum command length for
OpenThread's CLI using Zephyr's shell, which is currently fixed to
256 characteres. This limitation was not enough for certain allowed
OpenThread commands, like some variants of 'ot dataset mgmtsetcommand'.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Right now shell pointer is not assigned before doing a scan, so scan
results are printed using printk(). Save shell instance in context, so
results are printed using shell_fprintf(), thus better aligned in the
console output.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
The network statistics is stored for each traffic class, but the
collecting function was given net_pkt priority. The priority
must be first converted to traffic class and then the statistics
stored to correct place in the stats array.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some radio drivers need configuration before start-up. Up to now only
the RF2XX drivers allowed this, but other radio drivers need this as
well. In particular for setting EUI64 addresses.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
When `z_get_fd_obj_and_vtable()` function returns NULL (no valid entry
in the FD table for the socket), there is no need for further usermode
checks on the `ctx` pointer, as there is nothing to invalidate in that
case.
Fixes#25990Fixes#25991
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The original sockets system calls used file descriptors which
were actually net_context pointers. For all socket system calls,
any calls from user mode would check if the caller had permission
to use the net context.
This was later changed to not stuff net_context pointers into file
descriptors, but all the permission checking was unintentionally
lost, allowing all threads on the system to
read/write all socket file descriptors in the system at will, with
no way to isolate applications running on the same microcontroller
from each other's network activity.
This patch restores the permission checks on network context objects
for socket system calls that originated from user mode.
The call to z_object_recycle() was never removed from
zsock_socket_internal(); this is again leveraged to grant the
caller who opened the socket permission on the net_context
associated with the returned file descriptor.
To ensure that all socket calls do this checking, all uses of
z_get_fd_obj_and_vtable() have been routed through get_sock_vtable().
Objects have initialization state set and thread permissions
reset to just the caller in common zsock_socket() code.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The socketpair file descriptor context objects are heap allocated
and not drawn from a static pool. Register these as kernel objects
when we create them if user mode is enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Zephyr running on MPU devices have a different memory model than
process-oriented OSes like Linux and require a method to set
kernel object permissions on a file descriptor's underlying
context object. Add this, and a test to show that it is working.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Used for permission validation when accessing the associated file
descriptors from user mode.
There often get defined in implementation code, expand the search
to look in drivers/ and subsys/net/.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Need to use %zd in formatter string for net_pkt_get_len since it returns
a size_t otherwise we get something like:
error: format ‘%d’ expects argument of type ‘int’, but argument
3 has type ‘size_t’ {aka ‘long unsigned int’} [-Werror=format=]
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we are calling sendmsg() without any aux data, then msg_controllen
is 0 and msg_control is NULL. Check these allowed values properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are calling sendmsg() for a connected socket, then msg_namelen
is 0 and msg_name is NULL. Check these allowed values properly.
Also modify unit tests so that we test this scenario.
Fixes#25925
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In this, case is_nonblock is false and will_block is true.
Therefore, we *may* block, and furthermore we *expect* to
block. Checking is_nonblock is, in fact, redundant, and
passing K_FOREVER to k_sem_take() is justified.
Fixes#25727
Coverity-CID: 210611
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
After recent changes to shell, there is no more "no_such_command:
command not found" message when executing non-existing command. Restore
that message, so users are warned once again about wrong command,
instead of silently ignoring their request.
Fixes: 512de5ecac ("shell: Refactor command execution to enable raw
arguments")
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Due to new checks in mbedTLS config sanitizer, TLS option can no longer
be left enabled, when TLS is not used. OpenThread needs MBEDTLS_MD_C
and MBEDTLS_CIPHER_C even without TLS being used, so we need an option
to enable them manually.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The bt_l2cap_le_conn_rsp struct in l2cap_internal.h has not been
declared __packed. This can cause alignment problems on some
platforms if the struct is placed on an unaligned address.
A __packed declaration solves this issue by forcing the compiler to
use store instructions that do not required alignment.
Signed-off-by: Jim Luther <jilu@oticon.com>
Implemented an intermediate decrypt buffer to cover the CCM
overrun under CRC error conditions. The workaround is
applicable to nRF52832 SoC only, which is missing the
MAXPACKETSIZE register in the NRF_CCM peripheral.
Fixes#21107 for nRF52832 SoC.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The Router Advertisement can have prefix option. It's length
is 4 but the code did not check that which meant that we could
accept malformed packet. See RFC 4861 chapter 4.6.2 for details.
Fixes#25694
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that we do not add same IPv6 prefix, received from RA,
multiple times to prefix timer list. This avoids possible
denial-of-service issue if we receive suitably crafted RA packet.
Fixes#25698
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Set 'log_backend_rtt:panic_mode' before calling 'log_backend_std_panic',
because otherwise the RTT backend behaves as if the system is NOT
panicking and tries to do asynchronous writes via RTT_LOCK/UNLOCK.
Signed-Off-By: Andrew Fernandes <andrew@fernandes.org>
Adds propagation of error returns from the model init callbacks in
Access, and removing any other checks for successful init in the
foundation models.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Fix missing assignment of NRF_CCM->MAXPACKETSIZE register
for PDU sizes smaller than 251 bytes. If there is CRC errors
causing PDU length fields to be higher than configured PDU
buffer sizes in the controller, without the MAXPACKETSIZE
register set to correct PDU size, CCM module could overrun
the PDU buffer and cause memory corruption. This fix is
applicable for all nRF52 Series SoCs except nRF52832 SoC.
Fixes#21107.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This will be useful to test network stack's power management support.
There is no other way to do it, so far, but to hardcode such config
option test there.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
On buffer flush request it is very probably that write buffer
contains amount of data which is non write-block-size aligned.
Flash memory need to be write at minimal by write-block-size chunks.
This patch addresses mechanism which ensure such behavior by adding
missing bytes.
fixes#25471
streamer buffer size should be multiple write-block-size of
the flash device in order to avoid unaligned flash write
request.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
After removal of legacy controller ll_adv_aux.h does not exist anymore.
This is fixed in this PR by including ull_adv_aux.h instead.
The error only shows up when Advertisement Extensions are enabled
in the LL (CONFIG_BT_CTLR_ADV_EXT=y)
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
CC: mesh/access.c
mesh/access.c: In function 'model_has_dst':
mesh/access.c:483:10:
warning: returning 'u16_t *' {aka 'short unsigned int *'} from
a function with return type '_Bool8' {aka 'unsigned char'} makes
integer from pointer without a cast [-Wint-conversion]
483 | return bt_mesh_model_find_group(&mod, dst);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
The existing feature exchange procedure does not give the proper
response as specified in the BT core spec 5.0.
The old behaviour is that the feature-response returns the logical and
of the features for both peers.
The behaviour implemented here is that the feature-response returns the
featureset of the peer, except for octet 0 which is the logical and of
the supported features.
Tested by using the bt shell, and having different featuresets
on the 2 peers.
This fixes#25483
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
OpenThread moved from 4 to 5 debug levels and it was not possible
to configure all of them with Kconfig.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
In order to support the retransmission for the outgoing data:
1. The outgoing data packet is appended to the send_data queue
in net_tcp_queue_data().
2. tcp_send_queued_data() is called and will use tcp_send_data()
to sends queued but unsent data packet by packet
until there's an unsent data and the receiver's window isn't full.
tcp_send_queued_data() subscribes send_data_timer
that will handle retrasmissions with tcp_resend_data().
3. tcp_send_data() peeks a single chunk of data from the send_data
queue that will not exceed the maximum segment size
until the the receiver's window is full.
tcp_send_data() uses conn->seq and conn->unack_len as the sequence
number for the TCP packet.
conn->unacked_len is advanced on each send.
4. On data acknowledgment:
- acknowledged amount of data is removed from the beginning
of the send_data queue
- conn->seq is advanced by the acknowledged amount
- conn->unacked_len is decremented by the acknowledged amount
- send_data_timer is cancelled
- tcp_send_queued_data() is called to send queued but
prevoiusly unsent data
5. On timeout, tcp_resend_data() will reset conn->unack_len,
peek one packet from the beginning of the send_queue and resend,
terminating the connection on retries exceeded.
Meanwhile the outgoing data tcp_send_queued_data() is just
appended to the send_data but not sent.
In case of the acknowledgement, tcp_send_queued_data() will
start sending multiple packets until the receiver's window
is full.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to support the retransmission for the outgoind data,
add the following into the TCP connection:
- struct net_pkt *send_data (used as a queue)
- send_data_total
- unack_len
- send_data_timer
- send_data_retries
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to support the send window, add send_win into
the TCP connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to support the data retransmission, refactor tcp_out()
into tcp_out_ext() which supports passing the sequence number.
In addition drop modifications of the connection sequence number
from tcp_out_ext(), this is the responsibility of data retransmission.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to use struct net_pkt for the outgoing data queue,
update tcp_pkt_alloc() macros, so they support allocation
without buffer.
Additionally, merge tcp_pkt_alloc() macros macros into one.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Unsuccessfull packet clone in tcp_data_get() isn't handled,
add an error handling and don't ACK the incoming data in this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to handle sequence overflow cases, use
net_tcp_seq_greater() to check if the sequence is greater/lower.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
The initial sequence number for a connection should be randomized
to prevent easy guesses.
Do not randomize the sequence number if network test or
test protocol is enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Some Kconfig defined devices may be defined using dt_chosen_label
function. Since there is no way to ensure a device enabled in dts
is also defined in Kconfig, it may happen that instance is not
actually defined.
In this case device_get_binding might return 0, leading to undefined
behavior in the function that calls it.
When not already done, systematically check return of function
device_get_binding on devices defined through dt_chosen_label macro.
Trigger ASSERT when required and return error when possible.
Fixes#20068
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commits fixes the loading of bt/cf settings into memory. Only data
was loaded and not the address.
Signed-off-by: François Delawarde <fnde@demant.com>
For backwards compatibility ignore not-supported errors for devices
that don't support power management.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Change fixes storing the data by adding missing write retry after
the last compression. Without the change error was returned instead
of retrying.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
build breakage if SMP is disabled
In function `bt_unpair':
bluetooth/host/hci_core.c:2640: undefined reference to `bt_foreach_bond'
Signed-off-by: chao an <anchao@xiaomi.com>
There was a possible race condition between sock_is_nonblock()
and k_sem_take() in spair_read() and spair_write() that was
mitigated.
Also clarified some of the conditional branching in those
functions.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
The boot time measurement can also run with the HPET timer so there's
no reason to restrict it to APIC.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The link address was not printed correctly as log_strdup() was
missing from the debug print.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The transport segmented TX nack and seg_pending fields must be at least
6 bits to avoid overflow for 32 segment messages. This change rearranges
the seg_tx fields to gather all state flag fields in one byte, while
making the counter fields whole bytes.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Fix missing transmit buffer demutiplexing before checking if
slave latency needs to be maintained or cancelled.
This bug was detected when new transmit buffer was enqueued
overlapping with on-air radio transmission of empty PDU
preceding the handling of radio event done.
Symptoms of this bug being data transmission latency of upto
slave latency plus one times connection interval.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Increases the transport segmentented tx seg_o counter to 6 bits to avoid
overflow when sending 32 segments. The check in the send loop would
previously never be false, which causes segments to repeat
unnecessarily.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Fixes bug where the transport segmented tx would decrement the attempt
counter every time it ran out of buffers. If transport ran out of
buffers 4 times before the sending could complete, the transfer would
end prematurely.
Moves the attempt decrement to only execute when all segments have been
sent.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Ensures that friend messages are enqueued, even if the packet is
received with an appkey is unknown to the friend. Previously, sdu_recv
would return EINVAL if the appkey was unknown, which would prevent the
lower transport layer from adding the packet to the friend queue. This
is irrelevant for the logic in lower transport, and should not be
returned as an error.
Fixes#24014.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
If LE Read PHY fails the code was still trying to parse the buffer as a
valid response.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix extended advertiser not using correct set random address command
to set private (NRPA) address when privacy feature has been disabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Convert with a combo of scripts and by hand fixups:
git grep -l DT_FLASH_AREA_.*_ID | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_ID/FLASH_AREA_ID(\L\1)/'
git grep -l DT_FLASH_AREA_.*_OFFSET | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_OFFSET/FLASH_AREA_OFFSET(\L\1)/'
git grep -l DT_FLASH_AREA_.*_SIZE | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_SIZE/FLASH_AREA_SIZE(\L\1)/'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Several reviewers agreed that DT_HAS_NODE_STATUS_OKAY(...) was an
undesirable API for the following reasons:
- it's inconsistent with the rest of the DT_NODE_HAS_FOO names
- DT_NODE_HAS_FOO_BAR_BAZ(node) was agreed upon as a shorthand
for macros which are equivalent to
DT_NODE_HAS_FOO(node) && DT_NODE_HAS_BAR(node) &&
- DT_NODE_HAS_BAZ(node), and DT_HAS_NODE_STATUS_OKAY is an odd duck
- DT_NODE_HAS_STATUS(..., okay) was viewed as more readable anyway
- it is seen as a somewhat aesthetically challenged name
Replace all users with DT_NODE_HAS_STATUS(..., okay), which is
semantically equivalent.
This is mostly done with sed, but a few remaining cases were done by
hand, along with whitespace, docs, and comment changes. These special
cases include the Nordic SOC static assert files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
At present these can be very long since they include the full path of
the filename with the error.
Assertion failed at /home/sglass/cosarm/zephry/zephyrproject/
zephyr/tests/drivers/flash_simulator/src/main.c:102:
test_write_read: (0 not equal to rc)
Reduce the length by omitting the current directory (where the tests
are being run) from the output:
Assertion failed at tests/drivers/flash_simulator/src/main.c:102:
test_write_read: (0 not equal to rc)
This improves usability for people running tests locally.
Signed-off-by: Simon Glass <sjg@chromium.org>
Default values were fixed in the code. Moved to Kconfig to allow
customized configuration. Custom configuration may be used to prevent
line breaking injected on terminal width.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fix Service Changed configuration stored in flash not deleted in flash
when calling bt_gatt_clear from bt_unpair.
When clearing the check for "is bonded" should not be made. If the
bond information is already removed this check will fail.
When clearing the check for "modified" should not be made, clearing
is in itself a modification, and should always be made.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix CCC cfg not cleared when overwriting oldest bond. Calling
bt_unpair with a pointer to the key will result in the key addr being
memset to zero and bt_gatt_clear is called with an zero-set address.
This happens because unpair (hci_core.c) calls bt_keys_clear before
calling bt_gatt_clear.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit updates USB audio class implementation with
DT changes introduced in 7e0eed9235. In particular rename
DT_NUM_INST to DT_NUM_INST_STATUS_OKAY.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
In case of SMP (i.e. multiple execution units processing
the same list of tasks) we cannot use the same data structures for
getting data about active tasks as with just one processor (UP).
So until explicit support of SMP is added make sure we don't allow
to select both OPENOCD & SMP simultaneously.
Moreover starting from
commit a203d21962 ("kernel: remove legacy fields in _kernel")
this will lead to build-time error if MP_NUM_CPUS > 1.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
get_phy is referenced by BT_EXT_ADV only when BT_OBSERVER is also
selected. Avoid defined-but-not-used warnings in that situation.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
When the device driver model got introduced, there were no concept of
SYS_INIT() which can be seen as software service. These were introduced
afterwards and reusing the device infrastructure for simplicity.
However, it meant to allocate a bit too much for something that only
required an initialization function to be called at right time.
Thus refactoring the devices structures relevantly:
- introducing struct init_entry which is a generic init end-point
- struct deviceconfig is removed and struct device owns everything now.
- SYS_INIT() generates only a struct init_entry via calling
INIT_ENTRY_DEFINE()
- DEVICE_AND_API_INIT() generates a struct device and calls
INIT_ENTRY_DEFINE()
- init objects sections are in ROM
- device objects sections are in RAM (but will end up in ROM once they
will be 'constified')
It also generate a tiny memory gain on both ROM and RAM, which is nice.
Perhaps kernel/device.c could be renamed to something more relevant.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
By this commit USB audio class implementation is introduced
to Zephyr.
The Zephyr USB audio device class follows bellow
documentations:
- Universal Serial Bus specification rev2.0 (usb20.pdf)
- Universal Serial Bus Device Class Definition for Audio Devices
(audio10.pdf)
- Universal Serial Bus Device Class Definition for Audio Data Formats
(frmts10.pdf)
- Universal Serial Bus Device Class Definition for Terminal Types
(termt10.pdf)
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This commit adds support for receiveing data from ISO OUT endpoint
for NRF devices. NRF USB IP core does not generate IRQ when
data are received on ISO OUT endpoint and it must be synchronized
with SOF event.
Enable SOF handling by default if usb audio is configured
with NRF devices.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This commit adds support for bluetooth in nRF52820 SoC.
Bluetooth radio related files created and added to Zephyr.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Print detailed information about a given net_pkt. This is
useful if there is a memory leak and you want to see more
detailed information about the data inside the buffer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit renames the Kconfig `FP_SHARING` symbol to `FPU_SHARING`,
since this symbol specifically refers to the hardware FPU sharing
support by means of FPU context preservation, and the "FP" prefix is
not fully descriptive of that; leaving room for ambiguity.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add program download (firmware update) support according to the CAN in
Automation (CiA) 302-3 draft standard proposal v4.1.0.
The implementation supports a Zephyr specific vendor command allowing
external confirmation of a newly booted firmware image. If this is not
desired, the application can confirm the image by other means.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add a disk access driver for the stm32 sdmmc component. The driver is
based around the stm32 cube HAL and uses the blocking API.
Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com>
Added support for Qemu User Networking and tested with
qemu_x86 model. The support is kept simple assuming that
the TAP interface will always be preferred for more
sophisticated / practical use cases.
QEMU User Networking is implemented using "slirp", which
provides a full TCP/IP stack within QEMU and uses that
stack to implement a virtual NAT'd network. As this
support is built into QEMU, it can be used with any model
and requires no admin privileges on the host machine,
unlike TAP.
Added documentation to facilitate the user.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
The LLDP packet was created but its type was not set to LLDP
and was sent as ARP message.
Fixes#25084
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add OpenThread configuration option, which allows to configure and start
OpenThread stack operation manually. This mode should be used in NCP
devices, as well as is needed for certification purposes, where
OpenTread stack have to be configured by the test framework and not
initialize and join the network on its own.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The testsuite was always forcing minimal logging. This is problematic
as it does not allow user to see full logging string. Allow user to
override the minimal logging if needed, the default is still to
enable minimal logging.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Added special flag that can be used to indicate that optional
arguments are passed without any parsing (e.g. quotation marks
removal). Modified execute command to parse command line buffer
argument by argument.
After this change it is possible to forward whole command to
command handler (using select).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
If a ztest test case creates child thread(s), and one of the
descendent threads invokes ztest_test_pass(), ztest_test_fail(),
or ztest_thread_skip(), only that descendent thread will be
aborted.
Then ztest will try to run the next scenario on the ztest_thread
which is already in use. This was causing corruption issues on
SMP systems, and possibly other subtle, hard-to-debug
situations.
This patch ensures that ztest_thread is always dead before
re-using it, as run_test() now attempts to join on it instead
of using a semaphore.
The ztest_test_* functions now ensure that the ztest_thread
is always aborted, in addition to the current thread.
This isn't perfect. If the testcase spawned other threads,
they will keep running. The most robust way to fix this is to
iterate over all non-essential threads in the system and abort
them. Unfortunately, Zephyr doesn't have a facility to do
this safely.
It would also be simpler to re-use thread objects if
k_thread_create() could detect whether the thread was already
active and abort it, but this is currently not possible
since k_thread_create() can be used with uninitialzed
thread object memory and no checks are possible. This
may be improved in the future, see #23030.
Fixes: #22738
Partial fix for: #24713
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When using extended advertising the connection can be established on
different PHY. In order to have an updated value of the current PHY
we need to read the PHY of the connection in the connection complete
event.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add application control of initiating phy change procedure and it's
parameters.
The reasons for allowing the application control over the PHY:
- Allow changing to Coded PHY.
- Application may change PHY to react to changes in environment
to balance throughput and range.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add application control of initiating data length procedure and it's
parameters.
The reasons for allowing the application control over the data length:
- Bandwidth control adjusted based on number of active connections.
- Changing data length before switching to coded phy.
- Applying workarounds for interoperability problems.
- Controlling order of ATT MTU and data length procedures.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add Kconfig option so that the application can disable automatic
initiation of the data length procedure. This is symmetric with the
PHY auto initiation kconfig option.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Michael Hope
