Making a reference to the common work queue code should not necessarily
drag in the system workqueue, since it is possible to use a workqueue
that is not the system workqueue. This is done by moving the system
workqueue into its own code module.
Moving the system workqueue to its own code module allows removing the
NANO_WORKQUEUE and SYSTEM_WORKQUEUE kconfig options, and compiling the
common workqueue code and system workqueue all the time. They are only
linked in the final image if a reference to them exist, same as the
other kernel modules.
Change-Id: I6f48d2542bda24f4702e7c2e317818dd082b3c11
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Provide more detailed information about the controller address and
version upon init when debug is enabled.
Change-Id: I5fe9c7c91f95928cb3cc64b801137bb1466e4115
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
During implementation of alternate encryption procedure
usable in nRF51, commited in
c41d3edda8, re-encryption
procedure was broken. This commit fixes the issue, and
now re-encryption should work on both nRF51 and nRF52.
Change-id: Ia41200f42b1d46e1f3f35ff44b582d4ffcc5f4fa
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
So that application could check data pointer to see if any
data have been received and if read operation is complete.
Change-Id: I36c3ff81baefbc535374d937e5297938445eafa6
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This makes use of the same code used by LE to print the state transitions.
Change-Id: I90a04f3c3f426fde1e0987acb572f7371c483c1c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a common function to log state transitions including the caller
function and line in case something goes wrong:
[bt] [DBG] bt_l2cap_chan_disconnect: (0x0011b14c) chan 0x001199c0 scid 0x0040 dcid 0x0040
[bt] [DBG] bt_l2cap_chan_set_state_debug: (0x0011b14c) chan 0x001199c0 psm 0x0080 connect -> disconnect
[bt] [WRN] bt_l2cap_chan_set_state_debug: bt_l2cap_chan_disconnect()1562: invalid transition
Change-Id: I246a9004a04d93a38b8c7f7633705f6c191698b2
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Channel state shall be updated properly otherwise it may cause unexpected
errors.
Change-Id: Ifd54d6bd3c5b44a40c315fd8a2946b30168aa65f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This defines and clarifies PF bit macro for both UIH and
non UIH packets.
Change-Id: Ide7736c0fc8607708824766adbfccf1bd7bc48e9
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Security will be elevated based on the DLC required level
during connection.
Change-Id: I0b63885582f34a5689f7bc8081c1f9f011b2325f
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Initialize the variable to zero before computing.
Change-Id: Iccdf77a085667728dbb68779f001c8d940a7a89d
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
This is necessary in order to properly handle security errors which are
part of the testing specification thus can influence qualification.
Change-Id: If444e753be9196f3d5bb36cea00e332a33aa249f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is to avoid code duplication while implementing outgoing
connection.
Change-Id: I52f882b7be9180f29def59c8ac3ef0a4798b719d
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This is to avoid code duplication while implementing outgoing
connection.
This also moves setting initiator flag while allocating, than
doing it when SABM is received.
Change-Id: I8e811c995bf0eaa0bd24715e2e96d8a578a79c5d
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
This replaces initiator flag of session and dlc to enum which has
two values INITIATOR and ACCEPTOR.
Also this defines macros for CRs in header. Basically there are
three types fo CRs. Frame header CR has different meaning for
UIH and non UIH packets. Also this renames the existing msg hdr
CR to make it consistent.
These changes are basically done to make it more readable
Change-Id: Ic15e93465b0afbd19d8805f27d7a43f34ef38689
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Move controller code from drivers/controller to
subsys/bluetooth/controller.
Change-Id: I73f675188485aa3267507bad7647796e593a3da0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move the Bluetooth host stack from net/bluetooth to
subsys/bluetooth/host. This is preparation for having both host and
controller under the same root, i.e. subsys/bluetooth/.
Change-Id: I3bc796f7e331fca0c485f3890d62b9c03e027b96
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
FS_FAT_FLASH_DISK_W25QXXDV is a boolean so "" makes no sense.
Change-Id: Ic43529928d80bcd76c2876219990bcec86657d3d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The flash and RAM disk options are mutually exclusive (evident e.g. in
both defining FS_VOLUME_SIZE and FS_BLOCK_SIZE variables), so they
should really be inside a choice-endchoice block. The duplicated
options can also taken care of with a single definition using
conditional default values.
Change-Id: I87733f0c342166a9e03aa0e1f34390d91107b137
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The namespace allocated for the filesystem API is fs_* and FS_*. That
means all symbols and defines should adhere to it.
Jira: ZEP-1155
Change-Id: I422310448b7c7c347f621aea6d7b1d97ef25c94d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Subsystems code will reside in subsys/ folder. This patch creates the
folder and moves FS code there.
Jira: ZEP-1120
Change-Id: If3b1bcb996c5fbd4056cd5d1920d41d29810d6b2
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
