Fix CCC cfg not cleared when overwriting oldest bond. Calling
bt_unpair with a pointer to the key will result in the key addr being
memset to zero and bt_gatt_clear is called with an zero-set address.
This happens because unpair (hci_core.c) calls bt_keys_clear before
calling bt_gatt_clear.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Most places used an int so that should have handled most cases but
keys_set was using an unsigned int, which meant that checking len > 0
is an expression that is always false, and the error handling is not
working.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Avoid removing identity keys from the controller during the pairing
procedure. During the pairing procedure the keys will be cleared before
they are updated. This causes an unnecessary warning from HCI core where
it tries to remove an IRK key-set from the controller that has has not
been added yet.
While this is not an issue, the warning from HCI core is misleading and
might lead to unnecessary questions and investigations.
Warning appeared after: 6c6bd8c49e
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix directed advertising from privacy disabled peer. In this case we
need to have the local IRK in the controllers resolving list in order to
have the controller resolve the initiator address of the directed
advertising pdu (ADV_DIR_IND).
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix an issue where a slot in the key pool was considered free when
either the address was cleared or no keys were written in the entry
(enc_size == 0). This caused a problem with simultaneous pairing
attempts that would be assigned the same entry.
This patch makes it so a a slot is considered free even when keys are
not yet present in the entry, and makes sure the address is cleared in
case of pairing failure or timeout so to mark the slot as free.
Signed-off-by: François Delawarde <fnde@oticon.com>
Instead of having all (=addr NULL or BT_ADDR_LE_ANY to bt_unpair) as a
special case, iterate over all connected peers and unpair them the
regular way. This means bt_gatt_clear is called too. Doing this way
allows us to remove a lot of (now) unused code as well.
Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
Key overwrite feature allows to overwrite old pairing key
records when key storage is full and a new pairing request occurs,
or new keys are distributed. If enabled when key storage is full and
a keys storage slot is requested, the oldest keys added will be
removed. So new devices can be paired with no limitations and no need
to determine, which devices should be unpaired to free key storage
space explicitly in application. To enable the feature set
CONFIG_BT_KEYS_OVERWRITE_OLDEST=y.
Oldest keys are determined by minimum value of up-counting aging
counter. If you set CONFIG_BT_KEYS_SAVE_AGING_COUNTER_ON_PAIRING=y
aging counter values will be updated each time the secure connection
is established. This might increase flash wear out if at least two
secure connections are established and shut down periodically. When
the option disabled aging counter is still updated on each new secure
connection, but not stored to flash.
Signed-off-by: Sergiy Nikolayenko <sergiy_nikolayenko@jabil.com>
Some modules use snprintk to format the settings keys. Unfortunately
snprintk is tied with printk which is very large for some embedded
systems.
To be able to have settings enabled without also enabling printk
support, change creation of settings key strings to use bin2hex, strlen
and strcpy instead.
A utility function to make decimal presentation of a byte value is
added as u8_to_dec in lib/os/dec.c
Add new Kconfig setting BT_SETTINGS_USE_PRINTK
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
Logging module requires strings to be duplicated using log_strdup.
Enabling CONFIG_BT_DEBUG_KEYS caused runtime assertions in the logging
module.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move atomic.h to sys/atomic.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updated the bluetooth module to use static handlers. Removed the
old bt specific static registration.
The routine bt_settings_init() is still calling settings_init() which
IMO is not needed anymore.
Updates:
changed SETTINGS_REGISTER_STATIC() to SETTINGS_STATIC_HANDLER_DEFINE()
changed settings_handler_stat type to settings_handler_static type
removed NULL declarations
renamed bt_handler to bt_settingshandler, as bt_handler already exists.
renamed all bt_XXX_handler to bt_xxx_settingshandler to avoid any
overlap.
changed SETTINGS_STATIC_HANDLER_DEFINE() to create variable names from
_hname by just prepending them with settings_handler_.
updated all bt_xxx_settings_handler to just bt_xxx.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
This updates all client modules to const char processing of
setting names.
Update of peripheral_dis sample
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
Major changes are:
- Expose settings backend API to enable custom backend support.
- Add a new CONFIG_SETTINGS_CUSTOM backend to allow registering a custom
backend.
- Change api of the handlers h_set() routines to allow for
backend-specific read callbacks.
- Provide a customizable settings_backend_init() routine for custom
backends.
- Move runtime settings support to be its own backend.
Signed-off-by: François Delawarde <fnde@oticon.com>
Aligned format specifiers for the Bluetooth Host. Now, the format
specifier matches the variable type.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
When a device is considered unpaired any configuration set in Client
Features shall also be removed.
Fixes#15329
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Code need to be align after introduction of stream codec to
setting serialization subsystem.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
CCC settings was not removed when unpairing all keys.
It means CCC settings were still present in flash and were
loading at bluetooth initialization time.
Loading these orphan CCC settings would fill `bt_gatt_ccc_cfg`
configurations and would prevent to add new CCC when pairing
with a new device.
Signed-off-by: Olivier Martin <olivier.martin@proglove.de>
So far the stack hasn't provided any way for the application to access
the existing bonds. This patch adds such an API.
Fixes#10122
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This wasn't used anywhere and was typed incorrectly (the foreach
callback takes two parameters). There was also one user of this which
was triggering compiler warnings of mismatched callback type.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When doing bt_unpair() we need to pass the given identity when
disconnecting and clearing keys, in case all associated pairings were
requested to be cleared.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Make it possible to have multiple identity addresses as an LE
peripheral. For central role only the default identity is supported
for now. This also extends the flash storage in a backward compatible
way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Integrate the bt_keys submodule with bt_settings. Add a new
bt_keys_store() API to write keys to flash, and extend the existing
bt_keys_clear() to remove the keys from flash.
Along with this, add some helpers for genrating settings key values
containing a bluetooth address, as well as for decoding them to get
the binary bt_addr_le_t.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for loading IRKs into the controller as well as the LE
Enhanced Connection Complete HCI event. To simplify things, the old LE
Connection Complete handler translates its event into the new enhanced
one which is then the single place of processing new connection
events.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since more and more code is going to be reused by both the Host and the
Controller, this commit introduces a common/ folder that will contain
everything that is not tied to one of the two components but shared by
them.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The new IS_ENABLED macro allows exposing conditionally enabled code
always to the compiler, even though it may not ultimately end up being
built. This is in particular useful for letting the compiler catch any
logging format string errors. Introduce a new BT_DBG_ENABLED macro
that c-files need to define before including <bluetooth/log.h> in
order to choose whether BT_DBG() logs are enabled or not.
When no Bluetooth logs are enabled the patch also modifies the log
macros to have the format strings checked with the help of the
__printf_like annotation and empty static inline functions.
Change-Id: Ie6bc8e10727b5b306f3ed0f94089a07a22583d9b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Those are lefovers from nano_delayed_work usage.
Change-Id: I3f17c7b89b1fa946495e160732457500e2f74f25
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Add an implementation for the bt_storage_clear() API.
Jira: ZEP-181
Change-Id: Iae01c571c161317ea0cc44513d108301c7b5a069
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move the Bluetooth host stack from net/bluetooth to
subsys/bluetooth/host. This is preparation for having both host and
controller under the same root, i.e. subsys/bluetooth/.
Change-Id: I3bc796f7e331fca0c485f3890d62b9c03e027b96
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
