Add the require #ifdef blocks in radio.c, in order to support
building for nRF53 SoC series (and, in particular, for nRF5340
CPU1 SoC).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Conditionally include nrf5340_radio.h when building the
BLE controller for nRF5340 SoC. Introduce the header for
nrf5340.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit enables support in bluetooth/controller/Kconfig
for nRF53 series of SoCs.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
nRF5340 does not support a Radio TX power of 4dBm, so we
introduce a dependency for the respective Kconfig option
for TX power, so the option is never defined for nRF5340.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Define the nRF53 HW variant in include/bluetooth/hci_vs.h
and pass the define in hci_vendor.h
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The Company ID concept is not restricted to the controller, and should
be part of the wider Bluetooth scope, so it can be used on a
controller-less device. It's used in multiple host level modules, most
notably the Bluetooth Mesh and Device Information Service.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Some Bluetooth options are currently not supported by the experimental
BLE SW LL implementation done on VEGABoard. As such, hide them from
the user altogether.
The full list of disabled config options is as follows:
- CONFIG_BT_PHY_UPDATE
- CONFIG_BT_DATA_LEN_UPDATE
- CONFIG_BT_HCI_VS
- CONFIG_BT_CTLR_LE_ENC
- CONFIG_BT_CTLR_CONN_PARAM_REQ
- CONFIG_BT_CTLR_EXT_REJ_IND
- CONFIG_BT_CTLR_SLAVE_FEAT_REQ
- CONFIG_BT_CTLR_LE_PING
- CONFIG_BT_CTLR_PRIVACY
- CONFIG_BT_CTLR_EXT_SCAN_FP
- CONFIG_BT_CTLR_CHAN_SEL_2
- CONFIG_BT_CTLR_ADV_EXT
- CONFIG_BT_CTLR_XTAL_ADVANCED
- CONFIG_BT_CTLR_SCHED_ADVANCED
- CONFIG_BT_CTLR_TIFS_HW
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
This patch updates the config files required to enable the
BLE SW defined controller to be built on RV32M1 SoCs. Only the split
version is supported.
Signed-off-by: George Stefan <george.stefan@nxp.com>
Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
Signed-off-by: Ionut Ursescu <ionut.ursescu@nxp.com>
This commit takes the Nordic LLL and adapts it for RV32M1 SoCs, using
the blocks that are specific to this SoC: the GenFSK & LPTMR IP
blocks.
Signed-off-by: George Stefan <george.stefan@nxp.com>
Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
Signed-off-by: Ionut Ursescu <ionut.ursescu@nxp.com>
This commit adds the HAL layer needed for the BLE controller
LL on RV32M1 SoCs on OpenISA boards. Specifically, the controller
makes use of the the GenFSK and LPTMR IP blocks.
Signed-off-by: George Stefan <george.stefan@nxp.com>
Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
Signed-off-by: Ionut Ursescu <ionut.ursescu@nxp.com>
Having a pin toggle when the code reaches a certain point
is really useful for debugging; the infrastructure is already
in place for Nordic boards, so just build upon and enable the
mechanism on the Vega board as well.
Signed-off-by: David Leach <david.leach@nxp.com>
Update calls to nrfx HAL functions to reflect API changes introduced in
nrfx 2.0.0. All these functions are now called with the first parameter
pointing to the structure of registers of the relevant peripheral.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Fix Data Length Procedure to use Feature Exchange values to
send correct parameters based on whether Coded PHY is
supported by remote peer.
Relates to BT TS.5.1.1 tests:
LL/CON/MAS/BV-129-C
LL/CON/MAS/BV-130-C
LL/CON/SLA/BV-132-C
LL/CON/SLA/BV-133-C
Relates to commit fca32e41e6 ("Bluetooth: controller: Fix
DLE for remote unsupported Coded PHY").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the implementation of slow encryption setup design
alternative to send ENC_RSP PDU before sending REJECT_IND
or REJECT_EXT_IND PDU.
Fixes#19917.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix feature exchange event generation to be correctly
deferred to wait for Rx node availability for cases when
the procedure has already been performed on air.
Without this fix, remote feature request from host may not
get back a HCI event back.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Port missing implementation of the slave latency break
when there is data to be sent to peer master. Without this
initial data send from slave is delay by upto the slave
latency number of connection events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is a port of the commit 4135fb55f1 ("Bluetooth:
controller: Fix rejected enc procedure not terminated") and
commit 4d59ef306b ("Bluetooth: controller: Check if enc
procedure is in progress").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
A single connections may take up to 4 buffers at the same time. Make
number of connections that support this worst-case number
configurable.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Added implementation to cache Data Length Procedure when
another control procedure is in progress.
Relates to commit 26317491e04b ("Bluetooth: controller: Add
data length procedure queueing").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix MIC failure on re-encryption procedure when responding
at the same time to peer initiated feature request.
Relates to commit 560d6ddb964c ("Bluetooth: controller: Fix
Re-encryption procedure").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix dropped ENC_REQ PDU when retransmitting, if slave was
not listening or nack-ed it.
Relates to commit 31256568a283 ("Bluetooth: controller: Fix
ENC_REQ PDU retransmission").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix control tx queue handling to correctly pause control PDU
responses during encryption setup.
Relates to commit 4b4b650174bf ("Bluetooth: controller: Fix
control tx queue handling").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix implementation to correctly cache the control procedures
initiatable by local and peer. And, fix feature exchange and
version information procedures from being disallowed by
having then as cached requests to the controller.
Relates to #15256 and commit 0dcfa3853782 ("Bluetooth:
controller: Fix cmd disallowed and collision disconnects").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix check in start encryption to disallow new encryption
setup while there is one already in progress.
Relates to commit 120eba45f81b ("Bluetooth: controller: Fix
start encryption in progress check").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix a bug where in tx data PDU enqueued, while a ctrl PDU is
deferred due to Encryption setup being in progress, is
leaked causing HCI Tx Buffer Overflow crash.
Relates to commit 671ccc4b0ee6 ("Bluetooth: controller: Fix
data PDU leak during ctrl PDU defer").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix bug in Data Length Update procedure that caused the
connection to drop due to the implementation sending bigger
PDU before the peer has acknowledged the receipt of Length
Response PDU.
Relates to commit ffbbec7a89ca ("Bluetooth: controller: Fix
DLE during data transmission").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
We use the nRFx API nrf_get_irq_number(.) to retrieve the IRQ
line of the CCM peripheral, instead of the hard coded enum
value from MDK. We do this for portability, since these
enums may be different for different nRF SoC series.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix conditional compilation error in building the central
only samples as all peripheral structure member accesses in
the controller where not correctly compiled out.
Regression introduced in commit 6d8b12468e ("Bluetooth:
controller: split: Refactor LLL conn structure").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
We make a minor simplification in the way we define
RADIO_PDU_LEN_MAX in Nordic nRF LE radio driver; as
nRF51 SoC series is the only series where the LL PDU
max length representation is limited to a 5-bit field,
we simplify the conditional preprocessor expression,
to avoid having to list all nRF5x SoCs with PDU LEN
MAX is represented by an 8-bit integer field.
In addition, we modify the preprocessor conditional,
that compiles in the CCM support for 8-bit length field,
PDUs to be an #ifndef CONFIG_SOC_SERIES_NRF51X, instead
of #ifdef CONFIG_SOC_COMPATIBLE_NRF52X; this will
simplify the expression when adding nRF53X series
support.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add the missing initialization of master role terminate_ack
flag. This caused slave initiated remote termination as
procedure timeout.
Fixes#20135.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the LLL connection context to move out the member
fields not accessed in LLL execution context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move calculation of max_tx_octets from Nordic lll_conn.c to ULL, to
allow usage by other vendors and prevent duplicate code.
Signed-off-by: Morten Priess <mtpr@oticon.com>
With sub-microsecond resolution in ticker, it is not necessary to add a
precision margin to the conn_offset. A macro is created to allow setting
the margin to something other than the hard coded 2 * EVENT_JITTER_US.
Signed-off-by: Morten Priess <mtpr@oticon.com>
TX pdu buffers may need to be augmented for fragmentation or other
purpose, depending on vendor LLL implementation. Introduced define to
add extra bytes to TX buffer size, defaulting to 0 if unused.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Remove ifdef guard around inclusion of nrf_clock_control.h in bluetooth
controller as the defines in this header are needed anyway.
Signed-off-by: Solveig Fure <solveig.fure@nordicsemi.no>
Since the LE (Enhanced) Connection Complete that comes as part of
cancelling a connection does not come through the priority rx thread in
hci_driver.c, the event class was not being calculated and cached.
Hence, calculate and cache the class whenever an event is received as
part of invoking a command.
Fixes#20110.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
On connection callback generated by host, application
reading the RSSI value by using HCI LE Read RSSI Command
received -127 dB as the first connection event has not
occured yet in order to measure the RSSI value.
Fix this by using the RSSI value of received advertising
PDU by the initiator, and using the RSSI value of the
received CONNECT_REQ PDU by the connectable advertiser as
the initial value at connection setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
On connection callback generated by host, application
reading the RSSI value by using HCI LE Read RSSI Command
received -127 dB as the first connection event has not
occured yet in order to measure the RSSI value.
Fix this by using the RSSI value of received advertising
PDU by the initiator, and using the RSSI value of the
received CONNECT_REQ PDU by the connectable advertiser as
the initial value at connection setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix connection update procedure to be cacheable if any other
local or remote control procedure is in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
MD bit was set based on whether a memq link's next pointer
being NULL, instead the check should be that the memq has
more elements.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression in porting slave latency, slave latency
enabled was not used, cause slave latency to be applied
before first packet being acknowledged by the master.
Regression in commit 5dff214d57 ("Bluetooth: controller:
split: Fix missing slave latency impl.").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added in commit 1475402d41 ("Bluetooth: controller: Introduce ULL LLL
architecture"), then never used.
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add pre-empt timer stop when a prepare is executed so that
when the pipeline has another event queued, the firing of
the pre-empt timer does not pre-empt the just executed
prepare.
Relates to #19685.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrectly calculated ticks slots for a connection on
connection update. The reservation incorrectly included the
prepare offset.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Data Length Procedure to use Feature Exchange values to
send correct parameters based on whether Coded PHY is
supported by remote peer.
Relates to BT TS.5.1.1 tests:
LL/CON/MAS/BV-129-C
LL/CON/MAS/BV-130-C
LL/CON/SLA/BV-132-C
LL/CON/SLA/BV-133-C
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rx nodes are reserved during control procedures for
generation of HCI event on completion. Fix the allocation
and reservation in the form of a linked list per connection
context. Worst case, this list will hold one rx node for
overlapping non-instant control procedure (Data Length
Update) plus two rx node for control procedure with instant
(PHY update with Data Length Update support).
Fixes#19198.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The remote version information event needs to be processed by the
prio_recv_thread() thread in order to unblock the Host RX thread
(effectively hci_driver's recv_thread()) when it blocks waiting for a
response to a remote version information.
Add the same time gate the inclusion of the feature behind a new Kconfig
option: CONFIG_BT_REMOTE_INFO.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to be able to distinguish between connection-related events
that are generated by the controller and others genrated by LL control
procedures, introduce a new class for LLCP.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Cache the result of calling hci_get_class() to avoid repeatedly invoking
it on the same data. In order to cache it we take advantage of the fact
that both radio_pdu_node_rx_hdr and node_rx_hdr are not packed
structures and they currently have a spare padding byte (between type
and handle).
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Hide the details of obtaining a pointer to the PDU data from a node_rx
structure to simplify the code.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Call LLL reset functions when calling ll_reset to avoid carrying LLL
state across HCI resets. Respective functions already exist in LLL but
had not been called from anywhere.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Fix missing generation of data length update HCI event when
effective tx and rx timings change due to PHY update
procedure.
Fixes BT LL TS 5.1.0 test:
LL/CON/MAS/BV-52-C [Master Receiving Data, LE Coded, CI
Change]
Relates to #17097.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When ULL High and ULL Low are not at same execution priority
level, it is not necessary to disable ULL Low execution when
updating ticker using stop and start. Also, ULL Low need not
be disable inside Radio Events. This commit corrects some of
the conditional compiles.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Kconfig conditional include of Minimum Channels Used
and Channel Selection Algorithm #2.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ticker previous slot value with elapsed ticks value from
the time stopped ticker has expired. When a ticker is
stopped, if it was in its reserved time space, then the
currently occupied slot (was set to 0) should be the amount
of time that has elapsed in the expired and stopped ticker's
reserved time space and beyond until the stop.
This is required to ensure that any other new ticker does
not get scheduled over the stopped ticker's reserved time
space.
Fixes#19515.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for Zero Latency IRQs, which avoids any Zephyr
OS or application influenced ISR latencies on the
controller's ISRs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for Zero Latency IRQs, which avoids any Zephyr
OS or application influenced ISR latencies on the
controller's ISRs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When running a ticker node as "must expire", the node would invoke the
ticker callback even when programmed with latency. As "must expire" is
intended for scheduled events which are skipped due to collision, and as
such expected by LLL, purposefully skipped events should not generate
"must expire" callbacks.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix ULL implementation that uses conditional compilation by
replacing back to use of #if defined(...) in code accessing
compiled out struct members.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix for possible Tx Buffer leak during disconnection when
the buffers are in ULL context and not yet enqueued towards
LLL context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When more than one simultaneous connections are active,
transmitting data packets to peer, a termination causes
host to use the flushed pending number of completed packets
count for other active connections. This is on reception
of HCI disconnection complete event. But the controller has
not yet released any of the pending enqueued Tx buffers
which was happening after the disconnection event was
dispatched to HCI layer.
The fix here is to dispatch the disconnection complete event
from the LLL context after pending Tx buffers have been
flushed and the buffers get returned to Tx pool in the ULL
context. This way buffers are in the Tx pool before host
get to process the disconnection complete event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix for possible Tx Buffer leak during disconnection when
the buffers are in HCI thread context and not yet demux-ed
and enqueued towards LLL context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the mayfly scheduling of the Tx buffer flushing on
connection termination to be immediate (not to tailchain).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Check if the encryption procedure is in progress when receiving
rejection for the procedure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix issue in the handling of LL_REJECT_EXT_IND packets, this would look
at the procedures that are enqueued, and not the procedure that was
being rejected. This meant that although a reject was received for the
encryption procedure, the handling for a different control procedure was
run.
This would result in the link being terminated as control procedure
timer would time out for the encryption procedure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When aborting radio event, there is a possibility that the
packet timer would start the radio while the packet timer
is being reset. Hence, perform a second radio state disable
with packet timers uninitialised.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing radio status and configurations reset on radio
event abort. This caused under race conditions the radio
being put into active state after being aborted.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect ticker/mayfly user id used in scheduling the
abort of a radio event. Incorrect use of thread context as
the caller caused the abort function to be scheduled from
thread context while being called from ULL high context
level in reality. This could cause corruption of mayfly
scheduling.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When flash driver requests abort of radio event in unreserved
time space, resume radio events in the pipeline were not
flushed. These resumed events caused flash driver to assert
on the check whether radio was in use.
Fixed by flushing the pipeline of all radio events, resume
and also those events in pipeline with pre-empt timeout
being setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When multiple simultaneous peripheral connections are
supported, restarting connectable advertising by host on
peripheral connection establishment failed in controller.
This prevented establishing new connections while first
connection was active.
The failure was caused by a bug in the way controller was
using quota for Rx PDU buffers. As the quota count was
release before the connection complete event rx PDU buffer
being released, the Rx PDUs needed to reserve for
connection complete event for new connectable advertising
was not available. This caused the connectable advertising
enable to fail.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use entropy driver directly in bt_rand instead of stitching together
calls to sys_rand32_get to improve efficiency. The use of
sys_rand32_get could also leak timestamps into keys.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Added support for vendor specific meta data in LLL node_rx_hdr. This
enables vendors to add "footer" data to the RX PDU, for supporting
specialized BLE features.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix calling bt_hex and bt_addr_le_str multiple times in the same logging
call could result in string overwritten since log_strdup is not
guaranteed to duplicate the string buffer in all logging configurations.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added to allow vendor specific increase of user operation capacity for
ULL_HIGH, to support queuing additional ticker operations.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Enabled use of ticker must_expire feature for ensuring ADV timing
randomization, even when ADV doesn't get air-time. This reduces ADV
collisions. Not active for nRF51 platform for now.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Added support for vendor specific meta data in LLL conn object. This
enables vendors to add state data to connection, for supporting
specialized BLE slave features.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix regression introduced in refactoring of use of SWI.
Reduced use of SWI cannot be used in combination with
CONFIG_BT_CTLR_LOW_LAT as additional SWI is required
to split ticker WORKER and JOB contexts in order to
disable JOB but keep WORKER enabled.
Regression introduced in commit 78b461ae3e ("Bluetooth:
controller: Refactor use of SWI").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When not using ticker compatibility mode in legacy
controller, ticker job should not be disabled inside radio
events.
Ticker compatibility mode was introduced in
commit 3a9173afe1 ("bluetooth: controller: Revised ticker
for improved conflict resolution").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This file contains redundant definitions of a bunch of nRF IRQ numbers
(not all, however) that only generates confusion, as enumeration values
provided by MDK can be used instead.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Header files of nrfx HALs are not supposed to be included directly
but only with their names prepended with the hal/ directory (so that
an inclusion of an nrfx HAL header clearly differs from an inclusion
of an nrfx driver header).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The nRF52811 Radio is similar to nRF52840 and exhibits
similar Radio Timings constants. We align the LE Coded
PHY (S2) RX chain delay with that of nRF52840, which,
eventually fixes the TIFS for nRF52811. In nRF52840 we
correct the inline comment only.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We have introduced option HAS_HW_NRF_RADIO_BLE_CODED, which
reflects that an nRF SoC has a Radio with LE Coded PHY
capabilities. We now modify all #ifdef expressions for
Coded PHY in the nRF controller port, removing SOC_NRF52840
and adding this new option instead. This allows to build
an nRF controller with Coded PHY support for SOCs other
than nRF52840.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Nordic nRF52811 SoC has a 2.4GHx Radio which supports
LE Coded PHY, so we add the option to build a BLE
Controller for nRF52811 platforms with LE Coded PHY
support.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When compiling a sample like a beacon, none of the `if defined()`
statements in the switch case are actually compiled in, so the compiler
complains of an orphan mem_release();break; sequence.
Add a type that we know will always be compiled in in order to avoid
this issue.
Relates to commit 76bfea7cf9 ("Bluetooth: controller: Ensure that a
`case` statement is present").
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When both central and peripheral are supported, one each Rx
node will be needed by connectable advertising and the
initiator to generate connection complete, hence
conditionally set the count.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor to abstract the use of software interrupts in nRF5
Series.
Also, reduce the number of SWI used when interrupt priority
level configured is same for ULL High and ULL Low contexts.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit completes the refactoring of radio.c, so it
calls abstract functions for PPI handling for LE Coded
PHY (e.g. enable, disable channels, or configure endpoints),
which, then, call the platform-specific functions for PPI
handling. The abstract functions are simple wrappers,
implemented in radio_nrf5_ppi.h, conditionally, if we
build the controller with support for LE Coded PHY.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Make the definitions of LE Coded PHY-specific macros
and inline functions conditional, i.e. only if we
actually build the controller with support for LE
Coded PHY.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit refactors radio.c, so it calls abstract functions
for PPI handling (e.g. enable, disable channels, or configure
endpoints), which, then, call the platform-specific functions
for PPI handling. The abstract functions are simple wrappers,
implemented in radio_nrf5_ppi.h.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit defines generic macros for the software interrupt
(SWI) IRQ lines that are used for LLL and ULL LOW interrupts.
This is done for both the cases of the legacy and new (split)
controller architectures. In addition, it abstracts some of
the functionality around software-IRQ signals, to generic
functions, which have platform-specific implementations.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Changed documentation in Bluetooth Controller
Kconfig for BT_CTLR_ASSERT_HANDLER
Signed-off-by: Kristoffer Rist Skøien <kristoffer.skoien@nordicsemi.no>
This commit adds an explicit inclusion of toolchain.h from pdu.h.
The endianness preprocessor definitions (__BYTE_ORDER__,
__ORDER_LITTLE_ENDIAN__, __ORDER_BIG_ENDIAN__) are used by pdu.h;
these being not defined can easily go unnoticed and cause unexpected
behaviours, as detailed in PR #18922.
toolchain.h ensures that these preprocessor definitions are defined and
*must* be included in a file that uses these definitions.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Added ll_rx_link_inc_quota to allow vendor to manipulate
mem_link_rx.quota_pdu when cleaning up nodes via ull_vendor.h.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix a bug where in tx data PDU enqueued, while a ctrl PDU is
deferred due to Encryption setup being in progress, is
leaked causing HCI Tx Buffer Overflow crash.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix check in start encryption to disallow new encryption
setup while there is one already in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix MIC failure on re-encryption procedure when responding
at the same time to peer initiated feature request.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix control tx queue handling to correctly pause control PDU
responses during encryption setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to cache Data Length Procedure when
another control procedure is in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Workaround, defer peer initiated encryption while local
initiated procedure with instant is not complete. Peer
master has sent CONN_UPDATE_IND in response to
CONN_PARAM_REQ, and also has initiated a Encryption Setup
thereafter. In this case, avoid corruption of the connection
update context by deferring the Encryption Setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix implementation to correctly cache the control procedures
initiatable by local and peer. And, fix feature exchange and
version information procedures from being disallowed by
having then as cached requests to the controller.
Relates to #15256.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
nrf_timer.h and nrf_ppi.h are included by including
radio_nrf5.h, so we do not need to include them in
radio.c.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove incorrect LL_ASSERT check in Lower Link Layer that
checked for invalid connection handle on reception of PDU.
The assert is not needed as PDUs can be received until the
Upper Link Layer is aware of the acknowledgement of the
terminate ind PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix handling of Rx-ed PDU on termination, do not process
Rx-ed control PDUs and release the PDU buffer back to the
free pool.
Without this fix, Rx-ed control PDU was responded with a
Tx PDU, which did not get acknowledged or released.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix reset of Encryption Procedure state on reception of
REJECT_IND and REJECT_EXT_IND.
This is a regression in commit 79cb615770 ("Bluetooth:
controller: split: Port Enc setup to be queueable")
Relates to #18578.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the controller implementation to handle data packet
enqueue being pause on Encryption Request be done early in
the ULL when enqueueing packets towards LLL.
Fixes#18645.
Signed-off-by: Vinayak Kariappa Chettimada <vinayak.chettimada@gmail.com>
Fix reset of Encryption Procedure state on reception of
REJECT_IND and REJECT_EXT_IND.
This is a regression in commit 79cb615770 ("Bluetooth:
controller: split: Port Enc setup to be queueable")
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Post Tx pool corruption fix, clean up code and add comments
explaining the use of Tx node next field used to indicate
the Tx node's allocation from Control or Data pool.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the Tx FIFO, queue and pool corruption due to missing
release of link object to Tx link pool and hence missing
reset of the per connection initially allocated Tx link
free pointer.
The bug caused Tx PDUs and associated memory to be lost
leading to missing L2CAP segment transmissions. With lost
control PDU buffers, ULL would stall processing Done events
also leading to controller asserts.
Fixes#18546.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Due to conditional compile path ending in LL_ASSERT(0), the compiler
sees code following the assert as using uninitialized variables.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Disable Advertising Extensions by default, since they are not really
operational and they take RAM.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When compiling a sample like a beacon, none of the `if defined()`
statements in the switch case are actually compiled in, so the compiler
complains of an orphan mem_release();break; sequence.
Add a type that we know will always be compiled in in order to avoid
this issue.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix the pipeline prepare-resume implementation to correctly
handle multiple continuous events that request resume on
being pre-empted.
Symptoms of the bug being, when having continuous scanning,
and an active peripheral if a directed advertising is
started the peripheral event are not scheduled causing link
supervision timeout.
This is fixed by not having an enqueued resume event
prepared if there is an enqueued new non-resume event in the
pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Increase pipeline size to accommodate probable multiple
prepare for directed advertising events, with reserved time
which are shorter than prepare duration, being enqueued.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Increase the event start overhead time to accommodate for
processing time for dequeueing pipeline in Upper Link Layer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reduce the maximum number of pending event done elements by
decoupling it from the maximum pipeline elements.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix assert in the RPA timeout when no resolving entry exists in the
resolving list, and the advertiser was requested to use a local IRK
to generate it's own address.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Changed ticker behavior to resolve conflicts in ticker_worker instead of
in ticker_job. This allows better real-time slot allocation, as well as
allowing callbacks even if ticker node doesn't get air-time (for audio
stream housekeeping). A priority property now also allows prioritizing
one ticker node over others.
Compatibility mode enables lagacy ticker behavior if needed.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix an issue with enhanced connection complete event raised by the
advertiser role. The advertiser reported that it has resolved the
the identity address of the peer, even when the peer is connecting
using it's identity address.
The host will not have the correct on-air address type i.e public.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Changes related to Bluetooth TSE 11068.
This is done because the current test suite does not issue
an LE Enable Address Resolution command anymore in RPA
generation tests. Makes sense now that the Bluetooth SIG has
agreed to completely decouple address resolution from
generation.
Fixes BT LL TS 5.1.0 test:
LL/SEC/ADV/BV-03-C [Privacy - Non-connectable Undirected
Advertising, Resolvable Private Address]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the pipeline prepare or resume dequeue loop from
overflow. Fixes premature exit of dequeue of done FIFO
which caused the pipeline to overflow due to previously
placed done is not dequeued correctly and next event not
being put back into the pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable use of settings system in controller and introduce settings for
company_id and subversion_number.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Make the Upper and Lower Link Layer split architecture
implementation of the controller as the default when
building Zephyr Bluetooth Low Energy controller support
in applications.
Noticeable missing feature (porting) in comparison to old
architecture implementation is, Advanced scheduling of
connection events.
The missing features will subsequently be submitted
upstream.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rename the controller Kconfig option BT_LL_SW to
BT_LL_SW_LEGACY in preparation towards switch to new Link
Layer implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Conditional compile the use of Rx Pool used to dispatch ULL
context generated messages towards LL thread context, which
is presently only used in connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the conditional compile of Data Length Update event
generation on PHY Update Procedure when Data Length
Extensions are not supported.
The regression was introduced in
commit 70a89876d0 ("Bluetooth: controller: Fix missing
data length update event")
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added a fix to handle L2CAP start frame with payload length
of zero which otherwise sent zero length data start PDU on
air.
Relates to #17046.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixed a bug related to missing reset of packet timing
restriction variable.
Fixes BT LL TS 5.1.0 test:
LL/CON/SLA/BV-55-C [Initiating PHY Update Procedure - Packet
Time Restrictions, LE Coded]
Related to #17097.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix bug in Data Length Update procedure that caused the
connection to drop due to the implementation sending bigger
PDU before the peer has acknowledged the receipt of Length
Response PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable the Fast Encryption design and connection RSSI
measurement when CONFIG_BT_HCI_RAW is selected.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the controller implementation to perform connection
event length reservation based on the completed Data Length
Update and/or PHY Update Procedure.
This fix with avoid states/roles from stepping on each
others event length. Connection would have supervision timed
out or have stalled data transmissions due to insufficient
reserved air time.
Relates to #15171.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing generation of data length update HCI event when
effective tx and rx timings change due to PHY update
procedure.
Fixes BT LL TS 5.1.0 test:
LL/CON/MAS/BV-52-C [Master Receiving Data, LE Coded, CI
Change]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the implementation of initiator to use correct anchor
tick and remainder microseconds when sending out CONNECT_REQ
PDU and then to scheduling the first connection event. This
is a fix when initiator is in continuous scan.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix bug in the ported code of the connection update, when
the slave events are skipped due to other overlapping state
or role the connection update at the instant used wrong
latency calculations. This lead to connection disconnection.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix assert in controller checking ticker_id_prepare = 0 when
a scanner and connection are active, and the connection is
skipping events in order to resize Rx buffers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the reset of ticker_id_prepare variable to the early
return in event_connection_prepare function.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Port the implementation that does radio event abort due to
ISR latencies. The implementation measures if the ISR could
not meet the hard real time deadline and closes the event
early.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added interface to get Advertiser and Scanner instance
handle for use in Lower Link Layer module.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Renames the "Blueooth Controller Assertion Handler" to "Application
Defined Assertion Handler" to better fit the purpose of the Kconfig
option.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Introduce a separate buffer pool for events which the HCI driver
considers discardable. Examples of such events could be e.g.
Advertising Reports. The benefit of having such a pool means that the
if there is a heavy inflow of such events it will not cause the
allocation for other critical events to block and may even eliminate
deadlocks in some cases.
Also update all mesh samples not to specify explicit RX buffer counts
anymore. Instead, create appropriate defaults in Kconfig so that we
only need to override this in the app for cases like the bbc:microbit
with limited memory.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This event is a priority one, so it's not safe to have it use the RX
buffer pool which may be depleted due to non-priority events (e.g.
advertising events). Since the event is consumed synchronously it's
safe to have a single-buffer pool for it. Also introduce a new
bt_buf_get_evt() API for HCI drivers to simplify the driver-side code,
this effectively also deprecates bt_buf_get_cmd_complete() which now
has no in-tree HCI driver users anymore.
Fixes#16864
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
move misc/stack.h to debug/stack.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/slist.h to sys/slist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/mempool_base.h to sys/mempool_base.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/dlist.h to sys/dlist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move entropy.h to drivers/entropy.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move clock_control.h to drivers/clock_control.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move atomic.h to sys/atomic.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added a fix handling L2CAP start frame with payload length
of zero which otherwise sent zero length data start PDU on
air.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Moved and renamed ull_entropy_get to lll_entropy_get, placed under
vendor specific ll_sw. This is needed for SW implemented entropy,
to allow vendor implementation of faster, less secure random number
generator for randomizing ADV timing.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Reversed revised ticker implementation pending new design which resolves
the issues described in GH issues #16830.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix pending Tx control buffer leak on supervision timeout.
Queued tx buffers in LLL consists of both data and control
PDUs but only data buffers got correctly released.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Port the implementation that performed random backoff of
forced slave event scheduling.
When peer master implementation skips events, multiple
local overlapping slaves will randomize their forced
scheduling to break out of a round robin pattern increasing
the chance of synchronizing with their masters again.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Changed ticker behavior to resolve conflicts in ticker_worker instead of
in ticker_job. This allows better real-time slot allocation, as well as
allowing callbacks even if ticker node doesn't get air-time (for audio
stream housekeeping). A priority property now also allows prioritizing
one ticker node over others.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix scan requests being processed during directed advertisiments.
Directed advertise packets are not scannable
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add some missing fatal asserts that need to be caught to
avoid unexpected failures in the implementation of the
architecture.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the tx_ack mfifo count to accomodate both data and
control PDUs being acknowledged.
With out this fix, pending maximum number of data plus
control PDUs in LLL on supervision timeout asserted due to
tx_ack mfifo overflow.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Explicitly track the connection update related ticker stop
and start to avoid asserting due to ticker update being done
at the same time for compensating the master clock drift.
Relates to #11764.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added an internal ull_update_mark function to detect race
conditions while stopping ticker instances during slave
drift, disconnection and connection update.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Port the fix for the controller implementation to make start
encryption queueable if there is any control procedure in
progress.
Refer to #15335.
Relates to #15335, #15186, #15958 and #14636.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implements hooks to implement user protocols in ull.c
A user defined init function can now be called, this code is gated by
the CONFIG_BT_CTLR_USER_EXT define.
A user defined PDU length can now also be defined using the Kconfig
CONFIG_BT_RX_USER_PDU_LEN
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
Fix shell app regression due to stale tmp role implementation
not fully being removed in commit 4c77bf6194 ("Bluetooth:
controller: Remove redundant tmp role implementation").
The regression caused ticker indexes outside of allocations to
be accessed causing application faults and memory corruptions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The the footer structure and extra bytes (rssi, resolving index etc.)
were overlapping in memory, rx_ftr was moved into the header, but the
extra and footer are still being read from the same place, extra was
written to the end. So this avoided memory corruption, but reading extra
reads wrong information.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix compilation issues in central_hr or peripheral_hr sample when using
split LL and privacy is enabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The node_rx buffer does not contain the data from the connect ind, so
copy it over.
Also back up the adv pdu chan_sel bit so that it can be used to properly
select the correct channel selection algorithm
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The node_rx buffer for the connect ind buffer is being reused to send
connection complete event, make sure all data is backed up before
reusing the buffer.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The privacy state variables rl_idx and rpa_gen was not initialized
properly, which results in connection failing to be established.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Code refactored to allow calling of a proprietary rx demux function.
This will enable implementation of proprietary protocols and
functionality that is not yet public, while keeping a common zephyr
code base.
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
A conditional block to save a directed advertising report flag was
present three times. Remove two of the blocks.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Port fix for #14044 from legacy LL to split LL.
The master is using unknown rsp to terminate slave side initiated
procedures that has collided with the encryption procedure initiated by
the master.
We need to handle an unknown response that is sent in unencrypted during
the encryption procedure, even though we have already set up to receive
encrypted packets.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove comment stating that UNKNOWN_RSP during encryption procedure
is a workaround.
The core spec mandates that connections should not be dropped if
receiving this control packet during encryption procedure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This is a pure refactoring of the k32src_wait function. It used the
following rules when refactoring:
Don't use the preprocessor when unprocessed C language suffices.
Don't undefine macro's.
Avoid global variables when possible.
Use consistent names for similiar things (hf_clock, lf_clock).
Signed-off-by: Alexander Svensen <alsv@nordicsemi.no>
Fix broken master role RSSI measurement. Since the original
contribution clean up into Zephyr, the radio shorts that was
set for measuring the RSSI for master role has been broken,
as it was cleared by the radio switching code further in the
Tx ISR.
Signed-off-by: Alexander Svensen <alsv@nordicsemi.no>
The old footer was appended after PDU using pointer arithmetic. Now
the footer fields have been moved to the header struct, the
footer fields are now statically located in the data structure,
this is type safe and fields can be referred to by their actual
names rather than indirectly through reference to other members,
thus avoiding pointer arithmetic. Secondly, this change will pave
the way for adding other meta data in the future.
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
This commit adds support for board: nrf52811_PCA10056.
The nRF52840 DK: PCA10056 is the recommend development kit, it emulates
the nRF52811, and can be used as a starting point for development
before moving over to a custom board.
Please note that this development kit does not support Bluetooth
Direction Finding. What is more it cannot be used with most of Arduino
shields because of PCA10056 PIN layout.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix an issue wherein local or remote initiated Connection
Parameter Request procedure would stall without generation
of LE Connection Update Complete HCI event because a local
or remote initiated PHY Update procedure has overwritten the
currently active Link Layer Control Procedure type.
Signed-off-by: Alexander Svensen <alsv@nordicsemi.no>
This is a workaround for IOP issue, where peer rejects LLCP Slave
Connection Parameter Request with LMP Error Transaction Collision
error code even if previous request is complete at the instant.
Relates to #15366.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the encryption setup queueing implementation to avoid
overlapping with local initiated Length Update Procedure.
Fixes#15733.
Relates to #15335, and #15186.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is a follow up to commit 0eaa5e53a36af498115b4e56b1ea68cc89fc29ee.
`HAL_SW_SWITCH_RADIO_ENABLE_S2_PPI_BASE` is a base number for two PPI
channels, so two bits need to be marked in the used channel bit mask.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Due to a protracted merge of:
5e38ed9320
the naming for the HAL_SW_SWITCH_RADIO_ENABLE_S2_PPI changed
semnatics, now requiring use of
HAL_SW_SWITCH_RADIO_ENABLE_S2_PPI_BASE.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Mark the PPI channels and groups used by the Bluetooth controller
as occupied and thus unavailable for allocation through nrfx_ppi.
Add also a build time assertion that checks if these PPI channels
do not overlap with those assigned to the pwm_nrf5_sw driver
(to replace the comments in this driver that were supposed to warn
about this threat but had in fact little chance to be read by users).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Updated the controller implementation to not feature
exchange if already done once either by local or remote peer
device in an active connection session.
Signed-off-by: Alexander Svensen <alsv@nordicsemi.no>
Disable the unsupported controller privacy feature in the
ULL/LLL split architecture implementation.
This feature will be enabled in the future when it has been
ported to support multiple vendor SoCs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable the support for Zephyr HCI Vendor-Specific Commands
and Event in the ULL/LLL split architecture implementation
of the controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrectly defined Rx and Tx buffer sizes. Wrong
calculation allocated more memory than necessary.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Kconfig default values for ULL and LLL execution
priorities that caused build warnings when ranges changes
based on other priority values being selected.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect data type used in calculation of slot_us
detected by compiler, and reported as possible integer
overflow.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect conditional compilation that caused compile
error when lll_scan structure did not contain connection
context included which is needed only for central role.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the missing reset of Encryption Procedure state when the
peripheral responded with error reason as pin or key missing
which otherwise caused connection disconnection on next
reception of data or control packet.
Relates to #15570, and #15727.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is a workaround for IOP issue, where peer rejects LLCP Slave
Connection Parameter Request with LMP Error Transaction Collision
error code even if previous request is complete at the instant.
Signed-off-by: Alexander Svensen <alsv@nordicsemi.no>
Increase the resolution of advertising random delay from
1 ms unit to 1 ticker unit.
Relates to #10289, #10391, and #10398.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added prompt to BT_CTLR_RX_PRIO_STACK_SIZE, allowing vendor specific
configuration of high priority Rx thread stack size for
!SOC_COMPATIBLE_NRF.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix XTAL advanced feature by adding the missing
implementation to calculate and, retain or release the XTAL
clock source after a Bluetooth state or role is stopped.
Fixes#15817.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to toggle GPIO Debug pins on HFCLK
request and release by the controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implement a lower ISR latency ULL processing design. Instead
of looping use ISR/mayfly tail-chaining to process
successive ULL messages.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implemented ULL to yield from processing in an infinite loop
if current PDU being handled is deferred.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing BT_CTLR_FILTER conditional compilations that
cause compile errors when device whitelisting feature is
disabled in builds.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Renamed function vendor_cmd_handle to vendor_cmd_handle_common for
shared vendor commands. This allows vendor to implement
vendor_cmd_handle, containing both common and specific handling.
Signed-off-by: Morten Priess <mtpr@oticon.com>
* Rename the stack local 'done' to 'evdone' so as to disambiguate from
MFIFO_DEQUEUE_PEEK(done) which is actually 'mfifo_done'.
* add comment on ull_slave_done
* add comments to addr_us_get
* add comments to HCI_CLASS
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Fix the missing reset of Encryption Procedure state when the
peripheral responded with error reason as pin or key missing
which otherwise caused connection disconnection on next
reception of data or control packet.
Relates to #15570.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the nRF52840 Coded PHY radio timings based on testing
with conformance tester.
Fixes the following conformance tests:
LL/CON/MAS/BV-52-C [Master Receiving Data, LE Coded, CI Change]
LL/CON/MAS/BV-54-C [Slave Receiving Data, LE Coded, CI Change]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the regression in Coded PHY CI change implementation
introduced by reverting the commit 9d1ca9c390 ("Bluetooth:
controller: remove redundant PPI channel and TIMER CC").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Added Kconfig BT_MAYFLY_YIELD_AFTER_CALL to support vendor requirement
of invoking all outstanding mayflies for a given callee in
mayfly_run().
Signed-off-by: Morten Priess <mtpr@oticon.com>
In ull.c ll_rx_get, a configuration without CONFIG_BT_CONN would
sometimes return an uninitialized node_rx.
In ull_scan.c, the scanning channel was not initialized to 0 (37). This
would cause new scanning to start at random index (0,1,2).
Signed-off-by: Morten Priess <mtpr@oticon.com>
Add defines to support updated slot reservation calculation in advertise
Note: Numbers used in added defines are subject to HW specific tuning
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Added a new define (EVENT_IFS_US) to pdu.h - this is now used instead of
previous TIFS_US from vendor specific header
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Correct slot reservation time calc for legacy advertise
Add dependency on data lengths for advertise and scan response
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Fix regression by the addition of CONFIG_BT_CONN conditional
compilation that disabled the advanced clock (crystal)
oscillator management when only observer and/or advertiser
states supported in the controller build.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to pause data PDU transmission during
PHY update procedure in order to comply to BT Spec. v5.1
Vol.6, Part B, Section 5.1.10.1 Packet transmit time
restrictions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Minor refactoring to move PKT_US into ULL internal header,
and rename ull_conn_allowed_check to ull_conn_llcp_req.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Ported implementation of Data Length Update Procedure to
ULL/LLL architecture of the Link Layer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the controller implementation to make start encryption
queueable if there is any control procedure in progress.
The context related to encryption procedure is now shared so
that it will be used after the ongoing procedure completes.
The fix here maintains the old functionality of serializing
the queued data and LL Encryption Request PDU, so that data
queued before start encryption is acknowledged.
Fixes#15012.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Send unknown rsp instead of asserting when encryption related control
PDUs are received in the wrong state.
This would allow an attacker to intentionally crash the device.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Stop the Length request procedure from initiating during the encryption
procedue. This would cause the peer to disconnect the link with error
code LMP_TRANSACTION_COLLISION
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set the encryption procedure pending and start it as soon as
there are no other procedures running.
This allows the Host to enqueue the encryption procedure, and not
get disallowed command because a different LL procedure is active.
Fixes#15012
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The fix done in #14938 introduced a later assert when raising an HCI
event for the procedure that was terminated during the procedure
collision handling. This assert happens because the unknown rsp
has information that is needed when raising the event.
Solve this by copying the scratch packet into the node buffer so that
we keep the data.
Fixes#15183
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename reserved function names in the subsys/ subdirectory except
for static _mod_pub_set and _mod_unbind functions in bluetooth mesh
cfg_srv.c which clash with the similarly named global functions.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The master is using unknown rsp to terminate slave side initiated
procedures that has collided with the encryption procedure initiated by
the master.
We need to handle an unknown response that is sent in unencrypted during
the encryption procedure, even though we have already set up to receive
encrypted packets.
Fixes#14044
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix a bug where the controller would use the length
field of the advertisement packet before checking
if the length field was valid.
It is possible that the controller has received a packet
that passes CRC check but has a length field that is invalid.
This would cause the scanner to overwrite the scan report
buffer
Fixes: #14741
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
BT_WARN() should only be used for log messages that may indicate a
problem. However, the controller HCI code was using it for messages
that were of a pure debugging/informational nature. Convert these to
BT_DBG() instead - this should hopefully also help avoid unnecessary
user questions of seemingly alarming log messages.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The 2M and Coded PHY bit should not be set when the
PHY update procedure is not supported.
Fixes#14658
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Peer side will disconnect if controller initiates
Encryption procedure before PHY update procedure
has finished.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix bug in LL encryption procedure, controller was
using the wrong pointer to connection state.
Function event_enc_prep is called from
slave_event_prepare, where _radio.curr_conn has not
been assigned yet.
The connection ended up sending LL_START_ENC_RSP
unencrypted, resulting in disconnect on the peer
side with reason MIC failure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix implementation to correctly return the configured
default Tx Power Level.
Also, fix the missing use of RADIO_TXP_DEFAULT in the new
ULL/LLL implementation of Advertiser and Observer states.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation in controller to use range delay
alongwith the active clock accuracy jitter.
Range has been hard coded to 1000 meters, suffices
modules out in the market.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Due to regression the option to enable PHY Update Procedure
on proprietary 2M PHY for nRF51 series was disable.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Workaround from asserting when Rx PDU buffers from pool
needing resize is acquired by another connection. By
skipping the connection events to give some headroom for
the host to process the Rx packets and eventually make the
pool available for resize.
Fixes#11841.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use reverse order for bitfields on big-endian architectures. Treat
all PDU data as little-endian and add conversions as needed. Treat
access address as 4-byte value instead of u32_t to avoid flipping
endianness.
Signed-off-by: Wolfgang Puffitsch <wopu@oticon.com>
This moves the vendor-specific HCI command/event configuration
definitions out of bluetooth/common into bluetooth. This allows
the controller itself to indicate its support for vendor-specific
commands/events.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Check the return value of mayfly_enqueue() and assert if not successful.
Coverity ID: CID 190991
Fixes#13833.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Inside ll_test_end(), result of lll_clk_off() is not checked
which might result in releasing resources acquired for radio.
Coverity-CID: 190954
Fixes: #13861
Signed-off-by: Maksim Masalski <maxxliferobot@gmail.com>
Due to regression the option to enable Data Length Update
Procedure for nRF51 series was disable.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Some old peer central controllers respond with Unknown
Response PDU to our local Slave Initiated Feature Request
after the peer initiated the Encryption Setup Procedure.
The peer has voilated the Bluetooth Specification by sending
the Unknown Response during the Encryption Setup Procedure,
but as a workaround to IOP with such controller our local
implementation is updated to not disconnect the connection
but accept the voilating Unknown Response PDU.
Relates to #12362.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Same change as in commit 8cf8db3a73 ("Kconfig: Use a short, consistent
style for prompts"), fixing stuff that got introduced since then.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
mem_pdu_rx is not runtime resized meaning PDU_RX_SIZE_MIN is no longer
relevant.
Dynamic resizing was a left-over from the old bt controller.
Its size field was only ever set to PDU_RX_SIZE_MIN.
PDU_RX_SIZE_MIN only accounted for advertise PDUs.
So we remove size field from mem_pdu_rx.
However, the rest of the BT controller expects to be able to pull
RX_CNT-number of valid nodes from the pool at init/reset (rx_alloc)
time. This will fail unless we inflate the capacity by one.
To avoid inflation-by-one, mem_* would have to be rewritten to avoid
always-one-extra pattern.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Refactor PDU_RX_POOL_SIZE into its constituents and name each term.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Fix a bug in Encryption Procedure feature conditional
compile which prevent any data transfer when the feature was
disabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
* Slight tweaks to memq comments,
* Document most of mfifo through commentary.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
* Clarify certain functions and data structures in upper link layer.
* Disambiguate node rx event done, add commentary.
MFIFO_DEQUEUE macro does string concatenation.
Thus MFIFO_DEQUEUE(done) does not refer to done (the stack local), but
mfifo_done.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
ull_ref_inc already existed, but not ull_ref_dec.
No functional change expected.
Consistency is preferred due to code navigation.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Rename ull_tx_ack_put to ll_tx_ack_put as ack is enqueued
into LL thread context from ULL ISR context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move PKT_US definition from LLL header file to ULL header so
as to share it across vendors.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix compile error due to missing conditional compile of
connection related code when selecting only observer state
support.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Return meaninful HCI error when it's not possible to start advertising
because of maximum number of connections already in use.
Signed-off-by: Filip Kubicz <filip.kubicz@nordicsemi.no>
Remove the redundant proof of concept template temporary
role implementation from the repository.
Relates to #12860.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
During regression testing of PA/LNA feature it was noticed
that compilation failed due to missing port of the code
conditionally compiled for PA/LNA feature.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
It's more natural to use net_buf_pull_mem() for the HCI command
parsing. Note that this also fixes a bug in hci_cmd_handle() where it
would previously check for sufficient parameter length with the
command header still included in the buffer (which it shouldn't have
been).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix the control procedure context safety by adding checks in
thread mode control path to detect pre-emption by interrupt.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is a squash merge of commits introducing the new split
Upper Link Layer and Lower Link Layer architecture of the
Bluetooth Low Energy controller.
This introduces a new, improved Link Layer based on the
concept of split responsibilities; The Upper Link Layer
(ULL) is in charge of control procedures, inter-event
scheduling and overall role management. The code for the
ULL is shared among all hardware implementations. The
Lower Link Layer (LLL) is responsible for the intra-event
scheduling and vendor specific radio hardware access.
The communication between ULL and LLL is achieved through
a set of FIFOs that contain both control and data packets.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Signed-off-by: Wolfgang Puffitsch <wopu@oticon.com>
Signed-off-by: Morten Priess <mtpr@oticon.com>
Preliminary work done towards Mesh extensions on the old LL
architecture implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Missing updates to old architecture implementation towards
introduction of new ULL LLL architecture.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactored the internal LL interfaces to have return value
to match the HCI error code u8_t data type.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit renames the nrf5_clock_control.h and
nrf5_clock_control.c files to nrf_clock_control.h and
nrf_clock_control.c, respectively, as they are used
in nRF9160 builds, as well.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit renames the CLOCK_CONTROL_NRF5 Kconfig symbol to
CLOCK_CONTROL_NRF. The change is required to aleviates confusion
when selecting the symbol in nRF9160 SOC definition.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Use fixed-width type instead of enum for field op in struct
ticker_user_op to avoid struct layout differences between
compilers. Also make check whether struct sizes match size definitions
build-time asserts.
Signed-off-by: Wolfgang Puffitsch <wopu@oticon.com>
Adds documentation-commentary to some infrastructure used by the LL.
It is a long-term effort to better document the LL.
Notably ticker and mayfly require more documentation; this will be
done later.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Preparation to introduce the Upper Link Layer (ULL) and
Lower Link Layer (LLL) split architecture.
- Move SoC dependent HAL to vendor specific folder.
- Preparation to split data structures into ULL and LLL
types.
- Added more role and state conditional compilations.
- Added some work-in-progress implementation of advertising
extensions, will be used as inspiration in the new split
architecture work.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix an issue wherein local or remote initiated Connection
Parameter Request procedure would stall without generation
of LE Connection Update Complete HCI event because a local
or remote initiated PHY Update procedure has overwritten the
currently active Link Layer Control Procedure type.
Signed-off-by: Vinayak Kariappa Chettimada <vinayak.kariappa@gmail.com>
Fix in the do_ecb() function
In real HW this function busy waits for the ECB to be done.
In simulation with the POSIX arch a WFE was added to avoid that
infinite loop.
But this function is called with the ECB interrupts disabled.
In normal builds other interrupts will awake the CPU very soon
after entering into that WFE, and the problem was not discovered.
But, in controller only builds, during some conformance tests,
the loop will hang as no other interrupts are coming.
=> Replace the WFE() with a k_busy_wait (only for simulation)
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Fix channel map update procedure implementation's handling
of different transaction collision by not asserting but
disconnecting the connection due to invalid behavior by
peer implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Explicitly track the connection update related ticker stop
and start to avoid asserting due to ticker update being done
at the same time for compensating the clock drift.
The compensation related ticker update failure in this case
can be safely ignored as new anchor point is used anyway
at the instant of the connection update.
Fixes#8796
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This adds common option to disable support for LE Data Length Update
procedure in controller and host.
This will reduce flash usage by compiling out le_data_len_change
event handler that will never be called if controller has been
compiled with BT_CTLR_DATA_LENGTH option disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds common option to disable support for PHY Update
procedure in controller and host.
This will reduce flash usage by compiling out le_phy_update_complete
event handler that will never be called if controller has been
compiled with BT_CTLR_PHY option disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Updated controller implementation to disallow disabling
initiator state using scan disable. But allow disabling an
already disabled scan state. Also, disallow enabling scan
state while in initiator state.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated the controller implementation to not feature
exchange if already done once either by local or remote peer
device in an active connection session.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The channels assigned to the controller are reordered so that the ones
previously used and now available for other purposes have continuous
numbers. When the controller can take advantage of the pre-programmed
PPI channels (when TIMER0 is used as the event timer), the now free
channels are 0-4, when it cannot, it is the channel 0.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Several PPI channels in nRF5 family SoCs are pre-programmed with fixed
settings. A few of them can be used in the bluetooth controller instead
of the freely programmable ones that are used currently. This commit
makes such replacements where possible so that the universal channels
can be left available for other purposes.
This commit also removes macros used previously in calls to functions
enabling and disabling particular PPI channels (as it is sufficient
to use the BIT macro to set bits corresponding to the channel numbers)
to prevent such problems like the one introduces by commit
9d1ca9c390 (channel 18 changed to 17
but the related macro definition not updated).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add support for exchanging both minimum and maximum
connection interval values in Connection Parameter Request
Procedure implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is a pure refactoring of the k32src_wait function. It used the
following rules when refactoring:
Don't use the preprocessor when unprocessed C language suffices.
Don't undefine macro's.
Avoid global variables when possible.
Use consistent names for similiar things (hf_clock, lf_clock).
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
k_poll_signal was being used by both, struct and function. Besides
this being extremely error prone it is also a MISRA-C violation.
Changing the function to contain a verb, since it performs an action
and the struct will be a noun. This pattern must be formalized and
followed and across the project.
MISRA-C rules 5.7 and 5.9
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Fix an integer overflow in the scheduling implementation
that calculates whether resources required for next radio
event be retained.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit optimizes access to RNG driver by taking advantage
of the data structures layout. As result, number of calls to RNG
driver is reduced.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The entropy_nrf_get_entropy_isr(), which is specific to this driver,
is in fact equivalent of generic entropy_get_entropy_isr(..., 0).
This commit removes the entropy_nrf_get_entropy_isr() function
and replaces its usage by call to generic entropy API.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The bluetooth controller has been using the flag '-Ofast' to keep
within a real-time limit. There are two problems with this; firstly,
when a project should be optimized for size it is standard to use -O2,
not -Ofast.
Secondly, optimization flags have been deemed to be non-portable, so
instead of directly using "-Ofast" we should use the intent-macro
OPTIMIZE_FOR_SPEED_FLAG to ensure toolchain portability.
Testing has shown that we are still within the real-time limit when
changing from -Ofast to -O2. -Ofast is about 1us and 1% faster, but
increases the code size by 13kB (5% of the available flash on a
nRF51).
Since the slowdown is comparatively small compared to the code size
increase we have decided to use -O2 in place of -Ofast.
Other optimization combinations were also measured and their results
can be seen below:
-Ofast in BLE Controller and in #pragma in entropy driver.
Memory region Used Size Region Size %age Used
FLASH: 138920 B 256 KB 52.99%
[bt] [INF] encode_control: l: 6, 6, 7; t: 75, 45, 132.
-O2 in BLE Controller and in #pragma in entropy driver.
Memory region Used Size Region Size %age Used
FLASH: 125840 B 256 KB 48.00%
[bt] [INF] encode_control: l: 6, 6, 7; t: 75, 51, 133
-O3 in BLE Controller and in #pragma in entropy driver.
Memory region Used Size Region Size %age Used
FLASH: 138920 B 256 KB 52.99%
[bt] [INF] encode_control: l: 6, 6, 7; t: 75, 50, 132.
No extra CFLAGS for BLE and entropy driver (pragmas removed), using
CONFIG_SIZE_OPTIMIZATIONS=y
Memory region Used Size Region Size %age Used
FLASH: 120124 B 256 KB 45.82%
[bt] [ERR] isr_rx_conn: assert: '!radio_is_ready()' failed
No extra CFLAGS for BLE and entropy driver (pragmas removed), using
CONFIG_SPEED_OPTIMIZATIONS=y
Memory region Used Size Region Size %age Used
FLASH: 138004 B 256 KB 52.64%
[bt] [INF] encode_control: l: 6, 6, 7; t: 61, 51, 130.
NB: RAM usage differences were insignificant.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Now that log processing happens in a separate thread, the
BT_STACK_EXTRA macro is not needed (since there's no significant
overhead), and therefore the BT_STACK macros become unnecessary as
well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Added implementation to avoid retransmitting NACK-ed Tx PDU,
to save on current consumption in retrying to transmit in
case peer device has no free buffer to receive the PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
