Tracing subsystem is growing and although related to debugging, it does
deserve to belong into its own subsystem.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a Zephyr driver and abstraction layer for use by the 3rd party
CANopenNode module.
CANopenNode depends on the CO_driver.h file for platform-specific type
definitions, locking primitives, and CAN bus driver API.
This fixes#15278.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This is an integral part of userspace and cannot be used
on its own. Fold into the main userspace configuration.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Move test related code and the testsuite away from tests/ and make it a
proper subsystem.
The way tests were integrate in the tree was not obvious and actual
tests were intermixed with the testsuite code.
This will allow us to have trees with the testcode and without the
samples by just remove the folders tests/ and samples, needed for
isolating actual code from test/sample code.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit simplifies OS <-> Application interface controlling power
management. In the previous approach application-based PM required
overriding sys_suspend() and sys_resume() functions. As these functions
actually implemented power state change, in such case application
basically had to provide own implementation of all PM-related stuff,
which was not portable and hard to maintain.
This commit changes this scheme: The sys_suspend() and sys_resume()
are now system functions while the application could either use
built-in power management policies or provide its own. All details
of power mode switching are now handled by the OS.
Also, this commit cleans up the Kconfig options related to system-level
power management grouping them under common CONFIG_SYS_PM_ prefix.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This patch adds a JSON web token library that adds the capability
to sign JSON tokens. This was located in subsys due to the dependency
on MBEDTLS, which resides in /ext.
Signed-off-by: David Brown <david.brown@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Can choose the C++ standard (C++98/11/14/17/2a)
Can link with standard C++ library (libstdc++)
Add support of C++ exceptions
Add support of C++ RTTI
Add C++ options to subsys/cpp/Kconfig
Implements new and delete using k_malloc and k_free
if CONFIG_HEAP_MEM_POOL_SIZE is defined
Signed-off-by: Benoit Leforestier <benoit.leforestier@gmail.com>
Add monochrome character framebuffer for monochrome
graphic dot matrix displays and electrophoretic displays.
These displays are mostly monochrome and can only display
black and some other color, for example white. Typically,
a byte controls 8 pixels, arranged vertically or horizontally
depending on the controller or settings.
The API is not suitable to display graphics, the purpose is
to display text or symbols. It is possible to use several fonts.
A font can also consist of graphic symbols only and thus,
for example, enable the realization of a menu.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Add support for OS managed Power Management framework for Zephyr
under 'subsys/power'. This framework takes care of implementing
the _sys_soc_suspend/_sys_soc_resume API's, a PM policy based on
SoC Low Power residencies and also provides necessary API's to
do devices suspend and resume.
Also add necessary changes to support the existing Application
managed Power Management framework.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Summary: revised attempt at addressing issue 6290. The
following provides an alternative to using
CONFIG_APPLICATION_MEMORY by compartmentalizing data into
Memory Domains. Dependent on MPU limitations, supports
compartmentalized Memory Domains for 1...N logical
applications. This is considered an initial attempt at
designing flexible compartmentalized Memory Domains for
multiple logical applications and, with the provided python
script and edited CMakeLists.txt, provides support for power
of 2 aligned MPU architectures.
Overview: The current patch uses qualifiers to group data into
subsections. The qualifier usage allows for dynamic subsection
creation and affords the developer a large amount of flexibility
in the grouping, naming, and size of the resulting partitions and
domains that are built on these subsections. By additional macro
calls, functions are created that help calculate the size,
address, and permissions for the subsections and enable the
developer to control application data in specified partitions and
memory domains.
Background: Initial attempts focused on creating a single
section in the linker script that then contained internally
grouped variables/data to allow MPU/MMU alignment and protection.
This did not provide additional functionality beyond
CONFIG_APPLICATION_MEMORY as we were unable to reliably group
data or determine their grouping via exported linker symbols.
Thus, the resulting decision was made to dynamically create
subsections using the current qualifier method. An attempt to
group the data by object file was tested, but found that this
broke applications such as ztest where two object files are
created: ztest and main. This also creates an issue of grouping
the two object files together in the same memory domain while
also allowing for compartmenting other data among threads.
Because it is not possible to know a) the name of the partition
and thus the symbol in the linker, b) the size of all the data
in the subsection, nor c) the overall number of partitions
created by the developer, it was not feasible to align the
subsections at compile time without using dynamically generated
linker script for MPU architectures requiring power of 2
alignment.
In order to provide support for MPU architectures that require a
power of 2 alignment, a python script is run at build prior to
when linker_priv_stacks.cmd is generated. This script scans the
built object files for all possible partitions and the names given
to them. It then generates a linker file (app_smem.ld) that is
included in the main linker.ld file. This app_smem.ld allows the
compiler and linker to then create each subsection and align to
the next power of 2.
Usage:
- Requires: app_memory/app_memdomain.h .
- _app_dmem(id) marks a variable to be placed into a data
section for memory partition id.
- _app_bmem(id) marks a variable to be placed into a bss
section for memory partition id.
- These are seen in the linker.map as "data_smem_id" and
"data_smem_idb".
- To create a k_mem_partition, call the macro
app_mem_partition(part0) where "part0" is the name then used to
refer to that partition. This macro only creates a function and
necessary data structures for the later "initialization".
- To create a memory domain for the partition, the macro
app_mem_domain(dom0) is called where "dom0" is the name then
used for the memory domain.
- To initialize the partition (effectively adding the partition
to a linked list), init_part_part0() is called. This is followed
by init_app_memory(), which walks all partitions in the linked
list and calculates the sizes for each partition.
- Once the partition is initialized, the domain can be
initialized with init_domain_dom0(part0) which initializes the
domain with partition part0.
- After the domain has been initialized, the current thread
can be added using add_thread_dom0(k_current_get()).
- The code used in ztests ans kernel/init has been added under
a conditional #ifdef to isolate the code from other tests.
The userspace test CMakeLists.txt file has commands to insert
the CONFIG_APP_SHARED_MEM definition into the required build
targets.
Example:
/* create partition at top of file outside functions */
app_mem_partition(part0);
/* create domain */
app_mem_domain(dom0);
_app_dmem(dom0) int var1;
_app_bmem(dom0) static volatile int var2;
int main()
{
init_part_part0();
init_app_memory();
init_domain_dom0(part0);
add_thread_dom0(k_current_get());
...
}
- If multiple partitions are being created, a variadic
preprocessor macro can be used as provided in
app_macro_support.h:
FOR_EACH(app_mem_partition, part0, part1, part2);
or, for multiple domains, similarly:
FOR_EACH(app_mem_domain, dom0, dom1);
Similarly, the init_part_* can also be used in the macro:
FOR_EACH(init_part, part0, part1, part2);
Testing:
- This has been successfully tested on qemu_x86 and the
ARM frdm_k64f board. It compiles and builds power of 2
aligned subsections for the linker script on the 96b_carbon
boards. These power of 2 alignments have been checked by
hand and are viewable in the zephyr.map file that is
produced during build. However, due to a shortage of
available MPU regions on the 96b_carbon board, we are unable
to test this.
- When run on the 96b_carbon board, the test suite will
enter execution, but each individaul test will fail due to
an MPU FAULT. This is expected as the required number of
MPU regions exceeds the number allowed due to the static
allocation. As the MPU driver does not detect this issue,
the fault occurs because the data being accessed has been
placed outside the active MPU region.
- This now compiles successfully for the ARC boards
em_starterkit_em7d and em_starterkit_em7d_v22. However,
as we lack ARC hardware to run this build on, we are unable
to test this build.
Current known issues:
1) While the script and edited CMakeLists.txt creates the
ability to align to the next power of 2, this does not
address the shortage of available MPU regions on certain
devices (e.g. 96b_carbon). In testing the APB and PPB
regions were commented out.
2) checkpatch.pl lists several issues regarding the
following:
a) Complex macros. The FOR_EACH macros as defined in
app_macro_support.h are listed as complex macros needing
parentheses. Adding parentheses breaks their
functionality, and we have otherwise been unable to
resolve the reported error.
b) __aligned() preferred. The _app_dmem_pad() and
_app_bmem_pad() macros give warnings that __aligned()
is preferred. Prior iterations had this implementation,
which resulted in errors due to "complex macros".
c) Trailing semicolon. The macro init_part(name) has
a trailing semicolon as the semicolon is needed for the
inlined macro call that is generated when this macro
expands.
Update: updated to alternative CONFIG_APPLCATION_MEMORY.
Added config option CONFIG_APP_SHARED_MEM to enable a new section
app_smem to contain the shared memory component. This commit
seperates the Kconfig definition from the definition used for the
conditional code. The change is in response to changes in the
way the build system treats definitions. The python script used
to generate a linker script for app_smem was also midified to
simplify the alignment directives. A default linker script
app_smem.ld was added to remove the conditional includes dependency
on CONFIG_APP_SHARED_MEM. By addining the default linker script
the prebuild stages link properly prior to the python script running
Signed-off-by: Joshua Domagalski <jedomag@tycho.nsa.gov>
Signed-off-by: Shawn Mosley <smmosle@tycho.nsa.gov>
Enabling C++ support for the application has been inappropriately
located at the root of the Kconfig menu. The root should be kept as
clean possible to allow easy navigation.
This commit moves CONFIG_CPLUSPLUS into
~/"Build and Linker Features"/"Compiler Options".
This is a purely cosmetic change and does not change the
'visibility' (depends) of the Kconfig option.
Arguably, it would fit better into
~/"Build and Linker Features"/"Language Options"
but this entry does not exist.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Adapt the MyNewt non-volatile configuration system to become a settings
system in Zephyr.
The original code was modifed in the following ways:
* Renamed from config to settings
* Use the zephyr FCB, FS API, and base64 subsystems
* lltoa like function was added to sources as it was required but not
included in Zephyr itself.
* The original code was modified to use Zephyr's slist.h as single
linked list implementation.
* Reworked code which was using strtok_r, added function
for decoding a string to a s64_t value.
* Thank to the above the settings subsys doesn't require newlibc anymore.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Introduce flas_map module is abstraction over flash memory and its
driver for using flash memories along with description of
available flash areas.
Module provides simple API for write/read/erase and so one.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Some "random" drivers are not drivers at all: they just implement the
function `sys_rand32_get()`. Move those to a random subsystem in
preparation for a reorganization.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
read, update status
trigger flashing
erase image bank
Module is intended to be use by a higher-level
image management protocol module.
Signed-off-by: Fabio Utzig <utzig@apache.org>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Move a way from misc/ and put in its own subsystem to allow enhancements
in the future and make it a core part of Zephyr, not just something
misc.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This change introduces console_getchar() and console_getline() API
calls which can be used to get pending console input (either one
char or whole line), or block waiting for one. In this regard, they
are similar to well-known ANSI C function getchar/gets/fgets, and
are intended to ease porting of existing applications to Zephyr, and
indeed, these functions (shaped as an external module) are already
used by few applications.
The implementation of the functions is structured as a new "console"
subsystem. The intention is that further generic console code may be
pulled there instead of being in drivers/console/. Besides the
functions themselves, initialization code and sample applications
are included.
At this time, there're may limitations of how these functions can
be used. For example, console_getchar() and console_getline() are
mutually exclusive, and both are incompatible with callback
(push-style) console API (and e.g. with console shell subsystem
which uses this API). Again, the intention is to make a first step
towards refactoring console subsystem to allow more flexible
real-world usage, better reusability and composability.
Change-Id: I3f4015bb5b26e0656f82f428b11ba30e980d25a0
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Disk IO functions are used by both FS and USB Mass Storage.
This patch refactors those from FS directory to a separate one.
In addition existing, config options were modified to make
stuff meaningful.
Jira: ZEP-1276
Change-Id: Ia2a2e18f3dbbbdb964c3dc0427d8138ad86134cd
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
This moves the shell component into its own subsys and groups all
related files and options into a single place.
Additionally, one Kconfig option will now be required to enable the
shell:
CONFIG_CONSOLE_SHELL=y
The header files was also moved to include/shell/shell.h and can be now
referenced with
#include <shell/shell.h>
instead of
#include <misc/shell.h>
Updated documentation as well.
Change-Id: Iffbba4acfa05408055e9fd28dffa213451351f94
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move logging out of misc/ to its own subsystem. Anything related to
logging and any new logging features or backends could be added here
instead of the generic location in misc/ which is overcrowded with
options that are not related to eachother.
Jira: ZEP-1467
Change-Id: If6a3ea625c3a3562a7a61a0ba5fd7e6ca75518ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
* Moved networking code into subsys/net.
* Renamed net/yaip to net/ip at the same time.
* Fixed the tests/net to compile
* Fixed the Makefiles and Kconfig files in subsys/net
to use the new location of the IP stack
Change-Id: Ie45d9e8cb45a93fefdf969b20a81e3b1d3c16355
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move the Bluetooth host stack from net/bluetooth to
subsys/bluetooth/host. This is preparation for having both host and
controller under the same root, i.e. subsys/bluetooth/.
Change-Id: I3bc796f7e331fca0c485f3890d62b9c03e027b96
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Subsystems code will reside in subsys/ folder. This patch creates the
folder and moves FS code there.
Jira: ZEP-1120
Change-Id: If3b1bcb996c5fbd4056cd5d1920d41d29810d6b2
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
