This allows to specify which roles are supported. Broadcaster and
Observer roles are always supported.
Image size reduction for samples apps:
beacon 43148 -> 15196
central 46892 -> 46356
peripheral 47532 -> 45940
Change-Id: If260c13d63651b9b54df5bafc2c412b01dcb1eb0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
bt_gatt_subscribe requires setting proper value in the parameters ever
since indication support was introduced.
Change-Id: Ib78dac717874e51e21bc9f8ad10279ba9fe68097
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds gatt-discover-secondary which works as follow:
btshell> gatt-discover-secondary <uuid> [start_handle] [end_handle]
bt: att_find_type (0x00110d18): uuid 0x180f start_handle 0x0001 end_handle 0xffff
Discover pending
btshell> bt: bt_att_recv (0x001134a8): Received ATT code 0x01 len 5
bt: att_error_rsp (0x001134a8): request 0x06 handle 0x0001 error 0x0a
bt: att_find_type_rsp (0x001134a8): err 0x0a
Discover destroy
In addition to this gatt-discover is now renamed to gatt-discover-privary
to avoid any confusion with other discover types.
Change-Id: Iee1fdf3e72269b134e222b4a2c6b4329858e71b0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add discover type to bt_gatt_discover_params to the API is reduced to
just bt_gatt_discover, this should simplify adding support for
discovering secondary and included services.
Change-Id: Iadeed86fed115afee1340b2c09821d7fafdda0f4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since atoi is available in libc this implementation can be removed.
Change-Id: I3cbb230916f382e27d59b503618b6291c8f0b691
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
All the data shall be sent in little-endian byte order.
Change-Id: I6d4ab0760f92e202ddcb348d30f0d1f208f84f1d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
If tinycrypt is compiled in use it for encryption instead of HCI LE
Encrypt command.
Change-Id: I9cf70540f14ed449bfda52c4a0901462b9a60fe9
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Some tester commands require to response with current settings.
This patch is needed to properly track the changes in these settings.
Change-Id: Ib9c919e804decbe26ba6ab2a23f1c30d812f98ab
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This enables passing the value to be used when writing to CCC so it can
be configure for indications in adition to notifications.
Change-Id: Ied89faed422e5c5ec60618d512dbd3f250f50b46
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables bt_gatt_subscribe to subscribe using indication value in
addition to notification.
Change-Id: I25f3b057e36b023a79fb66b11b70716ecc299ba9
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This documents describes protocol used by external tester to drive
IUT. Currently initial version includes only Core and GAP services.
Change-Id: I2fcb366076313880116be2ead8916bb56a4b5910
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This big patch refactors tester application and put it in par with
updated tester protocol.
Change-Id: Ib016fdd0aac58a32bcdc67774843cf65d619947d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This is a mandatory characteristic for GAP servie. It must be included
in GATT db.
Change-Id: I27c0c6d56f5303c3c5d1606d7656c51823f74989
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This variable is not used outside of c file.
Change-Id: I89b34fb6dd2cdd9dd111b6e33829f170d0ba00ae
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch adds possibility of setting advertise mode.
If no advertising mode is set, use default value (discoverable).
Change-Id: I86456ca52ad54a2fd4e4c6443a79087ddeb99ec6
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Bluetooth shell now supports advertising type set while starting
advertise.
Change-Id: I1e672b4c9315368dcef38398834acc5541c1843b
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This makes shell a bit more convenient to use.
Change-Id: I50490eb3cf9434723737a71fb382316876ba6291
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This commands print list of all available commands.
On unknown command only short info about 'help' command is
printed.
Change-Id: I780f4fd8da7292192260a0e0af8815fe4e385ae2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Reduce usage of static variables making code easier to follow.
Also improve robustness in case of too many parameters provided.
Change-Id: I6a3f0162a4fb301479ed36c54ceca2967bb7e389
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If empty input was provided simply reprint prompt instead of printing
uage information. This makes it similar to linux shell.
Change-Id: Ie4d9e1e7cb011ddf14f490188335ddc44289ffcf
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Use more robust approach when registering shell callbacks. Instead of
allocating maximum number of callbacks use exact memory which is
needed.
Change-Id: I96db75375e8d24df328adc0622c7817a3328f860
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This callback is called when security level of connection changed.
Change-Id: Ifec130163fffe291cd012c99247017bd31173660
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There is no need to define for each descriptor its own read handler.
Each string descriptor will use generic string read handler if
possible.
Change-Id: I468a082c6875400ec4515588131132ef27cc8082
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
When identity is resolved only Identity Address should be used for
identifying connection.
Change-Id: Ic179286b09afced4997a755f1977eea818bc6e54
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
default_conn is assigned only on connected event so there was
no way to cancel pending outgoing connection.
Change-Id: Iba5018e887c5b3f87513fc5c8f4585fb6ec40c8d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There is no need to use strncmp for string type arguments terminaded
by NUL character.
Change-Id: Ib90517f4657de8da64f145afd0ac28aefa697026
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
To avoid multiple prints with cmd help one label will be used.
Change-Id: Ieaaffd8b4321fdb2ad2f95894d293ec1d6eb8d10
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Due to bug in test case configuration file tester application
was not build by 'Build Automation'. This application has all
Bluetooth debugs enabled so it is essential for build verification
process.
Change-Id: I51115d17a28614b7746c6d207d4362a94bc0f591
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch separate character to hex character convertion part and
moves related code to helper.
Change-Id: I5c754669583228566e80a9b20a9db0e639641677
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This allows to select more authentication options and reply
to all requests.
Change-Id: I220d945763b9381818c5caad52bf0f5e8b01ab54
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Bluetooth shell now supports Signed Write if CSRK key is present.
Change-Id: I035a0d314da4997105c64da58cf85bd95fdbaa5b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add support for signed write with sign parameter for write without
response.
Change-Id: I79008532d88b10d34db1f68898ad4258dd3e761b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This allows to register pairing callbacks that will display passkey
in case of authenticated pairing.
Change-Id: I18422193785fdcd8a2e567adeb65199bfadcdd1f
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Make stack size the same size as in hello app. Current stack cannot
handle correctly security tests.
Change-Id: I5946c6bbcbc5079cefefddbb229b3205364b24d0
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This adds gatt-write-without-response which can be used as following:
btshell> gatt-write-without-response <handle> <data>
bt: bt_gatt_write_without_response (0x0010f0a0): handle 0x0011 length 1
Write Complete (err 0)
Change-Id: Ide166049cf53e691a2269778bca1489f7027621f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds offset to gatt-write which can be used as following:
btshell> gatt-write 0011 0001 01
bt: gatt_prepare_write (0x0010f680): handle 0x0011 offset 1 len 1
Write pending
btshell> bt: bt_att_recv (0x00111918): Received ATT code 0x17 len 6
bt: att_handle_prepare_write_rsp (0x00111918):
bt: att_prepare_write_rsp (0x00111918): err 0x00
bt: gatt_exec_write (0x00111918):
bt: bt_att_recv (0x00111918): Received ATT code 0x19 len 1
bt: att_handle_exec_write_rsp (0x00111918):
bt: att_write_rsp (0x00111918): err 0x00
Write complete: err 0
Change-Id: I4d3c038ea572da92efe0de8ce426ffca15506440
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables writing from offset using Prepare Write + Execute Write
procedures including Long Write procedure when the data is bigger than
the MTU.
Change-Id: Id35d66c011ba582a4ba92ffe75444226e479335a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some devices (eg. Android KitKat) are confused if remote database
is empty.
Change-Id: Ie27920b6f64b12903917068101d5abb171ab42c0
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
If bt_gatt_subscribe -EALREADY that means it is already subscribed and
shall not be reused.
Change-Id: I83c620454c40863c71b1289d37c2b42571a907fd
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In the peripheral sample app use the async feature of bt_enable() to
verify that it works as expected.
Change-Id: I15f7758944a8c34d1aaef84f0ba77a6b5bbb4695
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We need to be able to perform the init procedure asynchronously
through a callback. The RX fiber is a good candidate to use for the
callback since it's not active in its normal operation before
drv->open has been called. In order to prepare for a future
bt_disable() API the init API is renamed from bt_init() to
bt_enable(). If a NULL pointer is given as the callback the API
behaves synchronously like the old bt_init().
Change-Id: I4e78fa8f32dcf5477ea05a8db75aca5cdce591fd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Attribute length can be up to 512 bytes long so it needs to be at least
uint16_t, ATT already takes care that the MTU does not exceed 512 bytes.
Change-Id: I6c8dc80a4b63f212420c26c0a24d93939fa510fe
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes the central sample discover the attributes and subscribe
to receive notifications of HeartRate Measurement Characteristic.
Change-Id: Icedbdd759638be0b8fa8515112208aa61ad5eb90
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes central sample to parse the Advertising Data and in case the
device supports HeartRate Service stop scanning and connect to it, if the
device disconnects then start scanning again.
Change-Id: I49962eadb5c82c7a910185212063cd576cadf62e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This will be needed to monitor connections with peripherals.
Change-Id: Iccea2696af72b0b8b3f40aac180738dc6b80abc8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With this patch advertising state and scanning state are stored as flags.
Change-Id: I5d2dc37972620ee89aaf55d45e294e8be82863d3
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds gatt-unsubscribe which works as follow:
btshell> gatt-unsubscribe <CCC handle>
bt: gatt_write_ccc (0x0010edc8): handle 0x0015 value 0x0000
Unsubscribe success
Change-Id: I812fd237f71c4cad8e188015f1cd4cd2f2902aa6
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Once connected store the bt_conn as context, this save the trouble of
entering the same parameter over and over and remove the lookups from
commands that requires a connection.
Change-Id: I9671b8fa07a1a61db45516f63eb007f19f0e59a1
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Change-Id: I50f0f4548fdf5c79c783f4055974e427ba9cbfe8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removes reference to the unsupported "-T <toolchain>" option and the replaces
the deprecated "-B <BSP>" option with "-P <platform>".
Change-Id: I21ab863dded9cbfd4fc0ab2fcade59137add08cf
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The online help ./scripts/sanitycheck --help describes usage.
Most users will simply want to run with no arguments.
Change-Id: Icedbbfc22599a64a6e3dbbb808ff3276db06f2e0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Adds to btshell app a command to enable mimic GATT client to
perform multiple read attributes request using set of input handles.
The syntax is: gatt-read-multiple <address> <addres-type> <h1> <h2> ...
Handles should be entered as hex values and are 2-octets wide each.
Change-Id: Ic37a4486a11c645685cbfc782d36457af0fe9453
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Allows shell commands read more number of input parameters.
It is updated to 10 input parameters.
Change-Id: Ia943e8c6f0caaaf74cebcdb9dbe3542d90b2e4b9
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This function operates on bt_conn so it should be in conn.c and
exported through conn.h. Rename it with the appropriate bt_conn_*
prefix.
Change-Id: Id17c67f0e95cc1afb10aa7742b2d2ce0110ea616
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_disconnect deals with the bt_conn object and should therefore
reside in conn.c and be exported through conn.h. It should also have
the appropriate bt_conn_* prefix.
Change-Id: I75eb648fd9aa8ced9a991d472c319d25f4b772af
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Renames supported platform configurations to conform to new platform
configuration naming scheme.
Example usage with PLATFORM_CONFIG:
make PLATFORM_CONFIG=basic_cortex_m3
make PLATFORM_CONFIG=basic_atom
make PLATFORM_CONFIG=basic_minuteia
make PLATFORM_CONFIG=galileo
xxx_ti_lm3s6965_defconfig -> xxx_basic_cortex_m3_defconfig
xxx_generic_pc_atom_n28xx_defconfig -> xxx_basic_atom_defconfig
xxx_generic_pc_minuteia_defconfig -> xxx_basic_minuteia_defconfig
xxx_quark_defconfig -> xxx_galileo_defconfig
Change-Id: I696eb8b9ad9a72d7a72efbe1341ce23500335764
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Uses PLATFORM_CONFIG to specify the configuration file instead of
KBUILD_DEFCONFIG. This name is more intuitive to Zephyr users and
it is not tied to kbuild.
Example usage:
make PLATFORM_CONFIG=generic_pc_atom_n28xx
make PLATFORM_CONFIG=generic_pc_minuteia
make PLATFORM_CONFIG=quark
make PLATFORM_CONFIG=ti_lm3s6965
make PLATFORM_CONFIG=fsl_frdm_k64f
Change-Id: I177608942c3e77c2f152743c862aad1d460c0e33
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes default KBUILD_DEFCONFIG to xxx_generic_pc_atom_n28xx_defconfig as
the xxx_generic_pc_defconfig configuration will not be supported in the future.
Note that like generic_pc, atom_n28xx runs on QEMU.
Change-Id: I49c5708e4b24dbf723eefc1efddfea4174d9cb1c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Bluetooth sample projects now use KBUILD_DEFCONFIG instead of BSP. This is
a necessary step in transitioning from BSPs to platforms.
Change-Id: I42c89d0b5c3d7de7ea62297950bb00f56ca97ed2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This allows to enable advertising with some fixed Advertising Data
and Scan Reponse.
Change-Id: Ie3a33a49fe8517c9e931b7805694bd9c7b05fcdb
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This adds gatt-exchange-mtu which works as follow:
btshell> gatt-exchange-mtu <bdaddr> <bdaddr_type>
bt: bt_gatt_exchange_mtu (0x0010c138): Client MTU 65
Exchange pending
btshell> bt: bt_att_recv (0x0010e310): Received ATT code 0x03 len 3
bt: att_mtu_rsp (0x0010e310): Server MTU 517
Exchange successful
Change-Id: I7280fb9d9fafc0f4bd1ef0f2226c255a5acf2592
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes it easier to use shell since one can copy full address
from console output. Both variants with and without braces are
accepted.
btshell> connect 7C:2F:80:94:97:39 (public)
Connection pending
btshell> Connected: 7C:2F:80:94:97:39 (public)
btshell> disconnect 7C:2F:80:94:97:39 public
btshell> Disconnected: 7C:2F:80:94:97:39 (public)
Change-Id: Ic10386ee054ade1900e5f010857c0f85e5cb364a
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Enables make outgoing connection with error handling.
Free connection objects maintained in polls are assigned to active
connection by result of lookup on the polls based on input
peer LE address.
Updates shell application to reflect above changes in stack.
Change-Id: Ibc71343c0d122cc78c48bac2ff1e50533369b7d2
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Notifications will be sent on connected/disconnected events.
Change-Id: Iaac6851a987a630ce41c5836de49dccc6ee5d385
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch adds support for enabling advertising on DUT. For now
setting custom advertising data or scan response is not supported.
Change-Id: I506d944565e524eb2103949df6cf003347d4c117
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Also rename bt_conn_security function to bt_security and
bt_conn_security_t to bt__security_t.
Change-Id: I543c7b97241c4389ef0eb491b6869f93105ae533
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This allows to elevate security of a connection.
Change-Id: I492a92026c8db6feccffb96334be4557a5c73b48
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Now that bt_conn is public using it directly is much more convenient
and in some cases save a lookup by address.
Change-Id: Ia489948634984fe4f1a430da553f8a2a740fb531
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Updates references to CONFIG_BSP_DIR to CONFIG_PLATFORM as part of the
BSP -> platform clean up.
Note that despite the renaming, the usage of the config option remains
unchanged.
Change-Id: I2846c3f761cf09871019c0855bf1824ae03e6b3c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds new commands to shell app allowing turn on/off active LE scan.
App uses scan results callback to get feedback when found any
advertisers around.
The dummy app's callback prints out info about findings.
Change-Id: Ifffe77b804230c19bbbcbc4f38e47210c835106d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Enables sending LE discovery results to user app.
Updates central apps to use new scan API.
Change-Id: Id319c96e15554f2eed4cf507cddd114ca74aa8e5
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Return code from command handler is not needed and was already ignored.
Change-Id: Ief073ccfe2ccd316b6d4eec5168fb564e96786ee
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This makes code looks similar to POSIX style parameter handling.
Also code is easier to read and doesn't require tricks like
'p += strlen(p) + 1' for next parameter.
Change-Id: I013e714ba81681da38e320fb69851c7b5a75bb52
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Adds above commands to the shell app.
Connection is made based on given address and type eg:
btshell> connect 00:00:00:00:00:00 public
In callback we get local connection id which is in fact,
the number of array entry in which the pointer to the corresponding
bt_conn has been written.
To disconnect, just provide the id eg:
btshell> disconnect 0
Change-Id: I24f7ec2de7f84c53ab847ded28a1821753c2a60d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
There's no clear need for this API (at least for now) and supporting
it means we really need to get all state cleanup procedures correct.
Remove it for now.
Change-Id: Ia2c7d51d410117bef12bc08f4f97a4e38ccfb77a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes it clearer that this is a specialized API not intended for
general app usage (unlike most other things in bluetooth.h).
Change-Id: I0ce1d5903610a9b3a99cf0be9f0e1462b04bf45a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Always prefix UUIDS for characteristics with service name.
Change-Id: Ic435fa725e6bc8918af631632156b071121cd0e0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
According to section 3.7 of Documentation/kbuild/makefiles.txt, using
EXTRA_CFLAGS in Makefiles is "still supported but their usage is
deprecated."
Change-Id: I585a9f84e8239a59b0f5b29eed0dc70efa253522
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Now that we have a publicly exposed connection object it makes sense
to pass that to the connection callbacks rather than an address.
Change-Id: I8e9b17733d1789539a83c3dbc7a778336d2b71ff
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For consistency, when including public header files, use <> rather
than "".
Change-Id: Id780388759c33d865f49c9e0faf9cde2251ca869
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This one should be used for all public connection related APIs. Right
now it includes the reference counting and connection callback APIs.
Change-Id: Ib9b67e6115bb2e51322644757da1170851c3ca17
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This fix a build issue after last rename of TIMO -> ZEPHYR in build
system variables.
Change-Id: Iba9fb2ae13df0c66c7c1031b3a27795a9ead0e97
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Moves the Bluetooth regression script 'bt_regression.sh' so that it resides
in the same directory as the other sanity scripts. It also renames it to
'bt_regression_chk' so that its name is consistent with the other sanity
scripts.
Change-Id: Ia5a683e2c370c91a90edc648634ce56e484dcc20
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The source is included to the manual and putting more comments helps
to understand the code.
Change-Id: Iefd6db2abf6070fd8c3fabdaf4946bdd7a045544
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixes compile errors:
...
Makefile:36: /make/env/defs.base: No such file or directory
Makefile:47: /target/make.ukernel: No such file or directory
make: *** No rule to make target '/target/make.ukernel'. Stop.
...
Change-Id: I693a939510b732ac810d5af756422c58e3f0c3ab
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fix typo and reformat test to make it more logic and reflecting
doxygen documentation.
Change-Id: Id869f0131132c9287eab71d11ae40d194a20ca20
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This application is intended for automated testing. It used binary
protocol for communication over UART and can be used for driving
Bluetooth stack by external tester.
Currently only single command registering (init) GAP service is
implemented.
Change-Id: I62e151baa2badc0f1297e65591b5f494ff7b841e
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
LD microkernel.elf
samples/bluetooth/peripheral/src/built-in.o: In function
`mainloop':
samples/bluetooth/peripheral/src/main.c:514: undefined reference
to `sys_rand32_get'
collect2: error: ld returned 1 exit status
Change-Id: Idec91d59fd98ec06f5e5728238cf9d9f6c37eb87
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Add battery level simulation decrementing from 100% by one every
second.
Change-Id: Ic6b819c32b42d65a044223f22e301835510823a4
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Manufacturer Name String in DIS is a mandatory feature for Heart Rate
profile as specified by HEART RATE PROFILE Spec.
Change-Id: I552b51b68012edfc4389604e91dd43b8b54fe65f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add Heart Rate simulation using 1 second sleeping loop and this is how
it is recommended in the Heart Rate Service Spec.
Change-Id: I1023a4089bc661a399acf865f4fc7afaf72b8f0f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This registers two simple callbacks for connection and
disconnection events.
Change-Id: I9e1f87d9e1a3c8ef457e15a1c30396fba7f7df4a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
After quark UART configuration was refactored it is not working
anymore. Since quark was never an officially supported target just
remove it from the regression tests.
Change-Id: If4bae99f5e0dfecfd3729ac0c42d7fd3d8affa0c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Implement Current Time write callback.
Change-Id: I2a6cb0b411c47e4d20ff34eadf8725bf23b0b7b9
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This field can be used to set the required permissions for an attribute
which can be checked by Bluetooth core before calling the callback.
Change-Id: Idcab8cdc5744358fab0b3c67b9c0503f1d1d9736
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Device Information Service along with model characteristics and
descriptor to the database table.
Change-Id: I28775cf48abe76d0a841ebc92e1579e2d4cdfa09
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This uses BT_GATT_CCC to declare CCC descriptors which makes the core
to managed the CCC configuration so the task don't have to do it.
Change-Id: Ied4fc7eaa1f9f3e6c23d4d5b20d5c26d606f93f4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
To implement CCC properly it is required to know the remote address since
it is per client, futhermore bt_gatt_notify requires an address where to
send the notification.
Change-Id: I9d9fdf72d668831bed76e2aef06816af3620f4b8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds write callback to CCC descriptors storing the value in a stack
variable.
Change-Id: I8cd2567c6fee730500b446192b73fc82d86ba1ff
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Notify property and Current Characteristic Configuration to Current
Time Service in peripheral app.
Change-Id: I44f36eea4f129c7b407b045da892f2ba88338592
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add Current Time Service currently providing hardcoded time since
there is no way of getting current time in the OS.
Change-Id: I9954d51f77905230a6dd180f37d3a48f379c69ec
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Updates references to this environment variable, which were missed
during previous renamings.
Change-Id: I1126271ce8b84d3eaedeab11198d3a3b645393af
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Since the build system now supports only one toolchain, the
VXMICRO_TOOL environment variable is obsolete. The sanity
check scripts that reference this symbol are revised accordingly.
(Note: As a temporary measure, the main sanity check script
continues to accept the -T option; however, the option has no
effect.)
Change-Id: I383b128b9f5b07164abb7ddeb5a699d819a20316
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The file extension indicates a "Microkernel DEFinitions" file,
and no longer reflects the obsolete VxMicro/Viper branding.
Change-Id: Ib95b271404a4a4737e851d603c371244fa609e4d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Eliminates references to the obsolete OS name. In most cases the name
is simply removed, as it isn't necessary.
Change-Id: I3796f2aebe802f8c6045b7424a3e7aab4d5fb8e8
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
According to section 3.7 of Documentation/kbuild/makefiles.txt, using
EXTRA_CFLAGS in Makefiles is "still supported but their usage is
deprecated." However, using make EXTRA_CFLAGS="-DSOMETHING" results in
EXTRA_CFLAGS from Makefiles being overwritten, obviously breaking the
build. This patch converts to them to the newer ccflags-y which also
fixes the problem.
Change-Id: I6309439599d4c9cc184f9ecd941bde841982ef07
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updates sample projects to ensure that fiber stacks are properly aligned by
using the __stack tag.
Change-Id: I4f92033571d65aa87b6d46da5d7cb6d92eadc27a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
These routines are either unused, or are always used in manner
that does not require their added security checking.
Change-Id: I6f484924ebc3d395a20879445a2fcabebf6c5014
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Renaming the directory include/nanokernel to be include/arch, which
better reflects the real nature of the directory and the contents
inside.
Change-Id: I2bc33ebc6715e2f0403227a558279fdf52398ade
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This commit changes the build parameter CONF_OVERLAY with the
name CONF_FILE.
Change-Id: I404a4aa87b167a9ca4e7b395d53c2f7794b232bc
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds the Makefiles to add sanity checks for
the bluetooth driver.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Iadfe6eb2662347a981393ffeb3e343f32c5f67f0
An extended inquiry response or advertising data packet shall not contain
more than one instance for each Service UUID data size.
Change-Id: I41d1a25fdcb2987e8d0cadfb2110fd62b3685f17
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Battery Service along with its characteristics and descriptors
to the database table.
Change-Id: Ifb83ebcb4d6cdafa5df84d643b2e2a69e5a6c1e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Heart Rate Service along with its characteristics and descriptors
to the database table.
Change-Id: Ibff52da7352883edccb7c5b903538a81aad2ba55
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds attributes for Generic Access Profile.
Change-Id: I1fe08429f80341e7ba9fc06ef35a6df9b5abbf84
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Length of "Test beacon" is 11 + 1 of type that should be 12 not 16.
In addition to that make the data variable static since they are only
used locally.
Change-Id: I2d7fb16cf7d383dafc9b083da6cd63a4d9be21c0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There's no point in enabling BLUETOOTH_DEBUG_HCI_CORE for the samples
as the user/developer is unlikely to be interested in this specific
sub-module of the Bluetooth stack. The samples already have the
BLUETOOTH_DEBUG enabled, so leave it up to the user/developer to
decide if they want to add specific sub-module debug options.
Change-Id: I327086464561667a2462db0aab00d0ffcdd40d4c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Build peripheral app for targets: pentium4 and ti_lm3s6965
Change-Id: Id98c94217ad39e1716b8f8bc6031b8814bae06f3
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Update the includes in the sample apps to match what their actual
dependencies are.
Change-Id: I6fdfa4ba0cda563433d51f0ec35fef8f2ee0fa40
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The 'else' statement should be in the same line that the
close brace of the 'if' statement. E.g.:
if (condition) {
do_this();
do_that();
} else {
otherwise();
}
This commit fixed this kind of error using the following script:
#!/bin/bash
for file in $(find ./ -name "*.[ch]" ! -path "./scripts/*" ! -path "./host/src/wrsconfig/*");
do
if [ ! -h $file ];
then
sed -i '/^[ \t]*}$/ {
:review_next_one_too
N
s/^\(.*\)\n[ \t]*else/\1 else/
/}$/ b review_next_one_too
}' $file;
fi;
done
Change-Id: I7e811a572d735fa08e84850055ebbde29eb10e8d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Some checkpatch issues were solved by scripts leaving other problems
such as alignment and indentation issues. In order to comply with the
defined coding style the following fixes were made:
- Fixed the function declaration moving the parameters' comments above
the function in accordance to the doxygen format.
- Fixed functions' opening and closing brackets. These brackets should
not be indented.
- Fixed the 'if', 'for' and 'while' statements adding the brackets
around the sentence.
- Fixed comments' alignment.
- Fixed indentation.
The work was done manually and submitted as one commit. I didn't
separate these changes in different commits because they were fixed all
at once. Basically, all errors were fixed in every file at once.
Change-Id: Icc94a10bfd2cff82007ce60df23b2ccd4c30268d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Use scan functionality by simple app that starts LE scan
and in a while stops it.
It uses basic HCI scan interface prepared for
supporting LE central role feature.
Change-Id: Idcde4c742290d46931ab86522e51b0fc547a2d42
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Set the toolchain in case the user doesn't have it set in their
environment.
Change-Id: Ia961598bc125ded9326747cc8c5810635a8481d5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enabling HCI_CORE debug helps to identify possible bugs.
Change-Id: I13df39d63ee9b15f83503d86edc71733c7db94d5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Allowing to redefine QEMU_EXTRA_FLAGS helps to overcome user channel
stuck cases, you still have the possibility to use bluetooth over tcp
by specifying QEMU_EXTRA_FLAGS="-serial tcp:...". Default behavior
remains the same though.
Change-Id: I3a8190a1ca04029e788bfd424f3b3a3be9f2af75
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Bluetooth regression and system regression would run compile test
for shell app.
Change-Id: I029772483e7aa9ac0717db760d8de1f6be3371b5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add support for nanokernel build for shell application.
Change-Id: Idf5f3673050c2ac4c941dc9164536fc487e9216b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove old way of starting qemu target and add extra information.
Change-Id: I37c378aa0eb873b3fc16362991eec8a6b661626b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Bluetooth shell sample application make use of serial console shell
and register Bluetooth commands to it. It shows example how console
shell might be used.
Change-Id: I98340422b90e85dc7a2c44823536121999a08952
Co-authored-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
It is not necessary to add any PRJ_INCPATH in order to build Bluetooth
samples.
Change-Id: I3ddb0a645e475d937a7067059e8bf5caa783a04e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Adds a sample which initializes Bluetooth and enables non-connectable
advertising (i.e. starts acting in the LE broadcaster role).
Change-Id: Ic554b1354464b357b44215af1c0b613f123aeb5d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bt_regression scripts builds all listed projects for all
configurations mentioned in the PRJ_LIST. For targets specified with
"!" it executes test in qemu.
Change-Id: I971a797b2a89547bb14208d0d43d1a36597bad52
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Extend bt_start_advertising to make it possible to add any data type
instead of just the name.
Change-Id: I3f2afe1eb64aec51f321f7fd7439e97b3d67374c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Enable CONFIG_BLUETOOTH_DEBUG option for Bluetooth samples.
Change-Id: Id0d0377082b16f78f15c5e968c866bed2df69844
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add nanokernel configuration to build Bluetooth init sample. Later on
sample would added to sanity check builds.
Change-Id: Ib7251c1b3f5d62c4f1e0bb1fba253ebb1e9342df
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The test registers Bluetooth driver to the Bluetooth subsystem and
runs bt_init() which calls open() callback. We return expected error
to indicate that there is no real Bluetooth device attached.
Change-Id: I1b324c82ce8be2ce73f2b41a07135b0bc76eed61
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This patch adds a simple app which initializes Bluetooth and enables
connectable advertising (i.e. starts acting in the LE peripheral
role).
Change-Id: I15bb43ce657b5592d32187a0dfd22ba8bd912641
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch adds a very simple application for demonstrating the use of
the bt_init() API. Right now this is just tested to work with qemu and
the HCI UART driver with the help of the btproxy tool on the host OS
side. More information is available in the samples/bluetooth/README
file.
Change-Id: I03f92d158e9e5d57275241502bb8fa94350fc335
Co-authored-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>