To exclude platform platform_exclude=foo should be used and not
platform_whitelist=!foo.
Change-Id: I4cddcd3b73e0bd8c42a0726776f8237ebd79a6ae
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
TinyCrypt provides implementation of AES CMAC so there is not need
for internal implementation in SMP code.
Change-Id: I15fe0daf8fca8c44b002636983b46502419c57a5
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to decrease number debug messages using config option.
Change-Id: I987d25c6d4b18503d6beb7feab97e9207100323d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
sys_rand32_get appears to get stuck with same number for a while so
instead just increment the heart rate by 1 until 160 and then return it
back to 90.
Change-Id: I2aea870c68539271a1bb6190a958a7e2d1914dc3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add a single option for enabling use of TinyCrypt library for
crypto. This option selects all required TinyCrypt options
depending on BT features enabled. Thanks to this applications
only need to select single option instead of set of required
TinyCrypt features.
Change-Id: I2862e9ad3e204635f2ed3199433982bcfb7112f6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The handle shall be the characteristic value handle not the CCC.
Change-Id: I677ca12fdd59023f2498f712b060197a59baee64
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With NBLE driver it is not possible to register services before
bt_enable completes.
Change-Id: I71194150b807e183b0016accb600ae9538ba9b01
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables sanitycheck to build for Arduino Due.
Note that there is no on-board bluetooth so bluetooth tests
are skipped.
Change-Id: I4f564e68ec65f01b7b33a32f6d0d7749290c0e5b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Enabling BLUETOOTH_DEBUG enables also serial console conflicting with
tester reusing the same UART.
Change-Id: I8058a019e61146ff05cc44ab543cf6ec9ff418ef
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This way we avoid bugs coming from wrongly (human) counted length.
Change-Id: I95eb87a78fc12d4c5e083ce1c65d8b690ad8db78
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way we don't need a special BT_BYTES macro and avoid bugs coming
from wrongly counted number of bytes (which is now evaluated at
build-time).
Change-Id: Ic6319234a816fe2fab6229b3bb980d0e3503e241
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce new UUID API with bt_uuid, bt_uuid_16 and bt_uuid_32
structs. The specific size structs are derived from the common bt_uuid
struct to make it possible to use CONTAINER_OF().
Change-Id: I9cb03c73406acb7768d410fdf29eae75d252163c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Board already defined in platform_whitelist
Change-Id: I2fed4b3c0663fd15d43ee697837a89439f7bd07a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Currently it is not possible to build for Arduino since wrong platform
was specified.
Change-Id: I85ff6f5adb003db9a0905d6afa04bb5dfbd55d53
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This adds a test case that passes prj_nble.conf as CONF_FILE so that
the same code tested using HCI Bluetooth driver is also tested using
NBLE driver.
Change-Id: Ia4ad59d74b82c02007c55ea4fa8f53833d7a7fe5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This make more sense since the handles are normally self allocated by
the stack.
Change-Id: I198dd9c3ef6259cff8a0e528514918ec18990dea
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is no need to keep arch specific prj.conf for these samples are
they are always the same.
Change-Id: I0f93b5a47458f9800a6654cc45914b911b42b3e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure the code behind CONFIG_BLUETOOTH_GATT_DYNAMIC_DB builds
properly and sanity_check is able to detect problems whenever there is
a change affecting it.
Change-Id: If46d1d9723f9daa494611e5a1799afd943e6519c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
All of the authentication APIs deal with bt_conn objects. For
consistency it makes therefore sense to use the proper bt_conn name
space with them.
Change-Id: I47912d542373df511524cc6ad2532d6c9a76ca68
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is essential so that the application can be notified of
connection failures and also be able to know the reason for the
disconnection.
Change-Id: I30108958963f6aeac690612bb26738dc4c67ca80
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update the advertising API according to what has recently been
discussed and agreed upon.
Naming-wise the most important change is the removal of "EIR" which
was confusing since this is mainly used with LE at the moment. The
Core Specification Supplement consistently uses the generic terms data
and data type to describe what we're dealing with here, so the new
names are bt_data and BT_DATA.
Another change is to detach the actual data from the struct by
converting it from an array to a pointer. This is not only essential
for supporting BR/EDR (which has a different length) but to also
minimize memory usage.
Another change is to require the caller of bt_le_adv_start() to
provide the array lengths of the ad and sd paramters. This way we
don't have to have the empty (8-byte) element at the end of each
array.
Lastly, the bt_le_adv_start() logic is slightly modified so that it
will always clear the respective data if necessary. Previously the
user might have been left with a previous callers data if it passed
NULL to the API.
Change-Id: I318026ceb1b52bb688edf4dcfed82613bd15c3e1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This makes it simpler to add the services directly into GATT services
table.
Change-Id: I090c7f9396329cf524947dd6647230c663a55f60
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
PROJECTINCLUDE is not required in app makefiles.
Change-Id: I3751b7c51c453dfe47d207bb11d171138668c4e7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Now that the H:4 driver is the default it doesn't have to be
explicitly enabled anymore. The only exception is the "no default
driver" option that's needed by the test_bluetooth unit test.
Change-Id: Ie582d51202714e314b76ffa9659c7a232a18fc1a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We'll need to have a much more flexible LE advertising API. This is a
first step in that direction. A convenience BT_LE_ADV() macro is
provided to ease converting application code.
Change-Id: I74854487bbdfb4b1cf1bee0b6351d1750a56ff86
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To have a clear split between LE & BR/EDR rename these APIs with the
appropriate prefixes.
Change-Id: I983df2b5880947d96f0ad289d12f3383f44894be
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Setting up new platforms to handle emulation, and make them the only
ones able to run on QEMU from the Makefile "qemu" target to avoid
confusion with other platforms. We have now platform qemu_x86 and
platform qemu_cortex_m3, also modification to the sanity checks to have
qemu support only on those platforms
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Change-Id: I9291918a1d58fea4f37750ada78234628f9a5d98
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Refactors existing menu by putting as topmost selectable option
general bluetooth subsystem support instead so far Low Energy (LE).
Implication of the change is introduction of new BLUETOOTH_LE config
flag. The flag needs to be propagated to all existing bluetooth
related apps to make them buildable.
Change-Id: I608c1baad038e0ee4cccf44a3e597e16ae1f7f54
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This makes BT_GATT_CHARACTERISTIC declare a local bt_gatt_chrc so the
applications don't need to declare themselves.
Change-Id: Icf3fad7dffea5667c6f13aa022a5722900da51e8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The spec says it should always be the very first descriptor after the
characteristic:
"BLUETOOTH SPECIFICATION Version 4.2 [Vol 3, Part G] page 534:
3.3.2 Characteristic Value Declaration
The Characteristic Value declaration contains the value of the
characteristic. It is the first Attribute after the characteristic
declaration. All characteristic definitions shall have a
Characteristic Value declaration."
Change-Id: I6c38dea9cc4c1a05997edbd348e2759680472725
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
value_handle is not used for anything.
Change-Id: I3885d221b162eb3bd44956af64280baf61dc001b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bt_gatt_register will assign a handle if not initialized and removing
the handle makes it simpler to change the attributes since it is no
longer possible to have conflicting handles.
Change-Id: I787f7325cc990c360056b1aefd07bb7d7876b445
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This allow calling bt_gatt_register multiple times so different tasks
can add their own services separately.
Change-Id: I8143ddedfa1079087d608013d1a97b552a3007dc
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This allow sending direct notification to a specific peer without
using CCC which is allowed by the spec:
BLUETOOTH SPECIFICATION Version 4.2 [Vol 3, Part F page 507
3.4.7.1 Handle Value Notification
A server can send a notification of an attribute’s value at any time.
Change-Id: Ieff29216cb9ba197c0da92d7b22b26e63101cfa8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
To allow the remote central to pair and encrypt the link.
IO capabilities are set to DisplayOnly.
Change-Id: I46459539f1b882952d29ee5eb8d17766715de4b8
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
We had two attributes stored with the same handle.
Change-Id: Ib24912578b958d428d6b3da3c2f73994691622bb
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This allows to specify which roles are supported. Broadcaster and
Observer roles are always supported.
Image size reduction for samples apps:
beacon 43148 -> 15196
central 46892 -> 46356
peripheral 47532 -> 45940
Change-Id: If260c13d63651b9b54df5bafc2c412b01dcb1eb0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This variable is not used outside of c file.
Change-Id: I89b34fb6dd2cdd9dd111b6e33829f170d0ba00ae
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
In the peripheral sample app use the async feature of bt_enable() to
verify that it works as expected.
Change-Id: I15f7758944a8c34d1aaef84f0ba77a6b5bbb4695
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We need to be able to perform the init procedure asynchronously
through a callback. The RX fiber is a good candidate to use for the
callback since it's not active in its normal operation before
drv->open has been called. In order to prepare for a future
bt_disable() API the init API is renamed from bt_init() to
bt_enable(). If a NULL pointer is given as the callback the API
behaves synchronously like the old bt_init().
Change-Id: I4e78fa8f32dcf5477ea05a8db75aca5cdce591fd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Attribute length can be up to 512 bytes long so it needs to be at least
uint16_t, ATT already takes care that the MTU does not exceed 512 bytes.
Change-Id: I6c8dc80a4b63f212420c26c0a24d93939fa510fe
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The online help ./scripts/sanitycheck --help describes usage.
Most users will simply want to run with no arguments.
Change-Id: Icedbbfc22599a64a6e3dbbb808ff3276db06f2e0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Renames supported platform configurations to conform to new platform
configuration naming scheme.
Example usage with PLATFORM_CONFIG:
make PLATFORM_CONFIG=basic_cortex_m3
make PLATFORM_CONFIG=basic_atom
make PLATFORM_CONFIG=basic_minuteia
make PLATFORM_CONFIG=galileo
xxx_ti_lm3s6965_defconfig -> xxx_basic_cortex_m3_defconfig
xxx_generic_pc_atom_n28xx_defconfig -> xxx_basic_atom_defconfig
xxx_generic_pc_minuteia_defconfig -> xxx_basic_minuteia_defconfig
xxx_quark_defconfig -> xxx_galileo_defconfig
Change-Id: I696eb8b9ad9a72d7a72efbe1341ce23500335764
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Uses PLATFORM_CONFIG to specify the configuration file instead of
KBUILD_DEFCONFIG. This name is more intuitive to Zephyr users and
it is not tied to kbuild.
Example usage:
make PLATFORM_CONFIG=generic_pc_atom_n28xx
make PLATFORM_CONFIG=generic_pc_minuteia
make PLATFORM_CONFIG=quark
make PLATFORM_CONFIG=ti_lm3s6965
make PLATFORM_CONFIG=fsl_frdm_k64f
Change-Id: I177608942c3e77c2f152743c862aad1d460c0e33
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes default KBUILD_DEFCONFIG to xxx_generic_pc_atom_n28xx_defconfig as
the xxx_generic_pc_defconfig configuration will not be supported in the future.
Note that like generic_pc, atom_n28xx runs on QEMU.
Change-Id: I49c5708e4b24dbf723eefc1efddfea4174d9cb1c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Bluetooth sample projects now use KBUILD_DEFCONFIG instead of BSP. This is
a necessary step in transitioning from BSPs to platforms.
Change-Id: I42c89d0b5c3d7de7ea62297950bb00f56ca97ed2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Now that bt_conn is public using it directly is much more convenient
and in some cases save a lookup by address.
Change-Id: Ia489948634984fe4f1a430da553f8a2a740fb531
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Updates references to CONFIG_BSP_DIR to CONFIG_PLATFORM as part of the
BSP -> platform clean up.
Note that despite the renaming, the usage of the config option remains
unchanged.
Change-Id: I2846c3f761cf09871019c0855bf1824ae03e6b3c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Always prefix UUIDS for characteristics with service name.
Change-Id: Ic435fa725e6bc8918af631632156b071121cd0e0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Now that we have a publicly exposed connection object it makes sense
to pass that to the connection callbacks rather than an address.
Change-Id: I8e9b17733d1789539a83c3dbc7a778336d2b71ff
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For consistency, when including public header files, use <> rather
than "".
Change-Id: Id780388759c33d865f49c9e0faf9cde2251ca869
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This one should be used for all public connection related APIs. Right
now it includes the reference counting and connection callback APIs.
Change-Id: Ib9b67e6115bb2e51322644757da1170851c3ca17
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
LD microkernel.elf
samples/bluetooth/peripheral/src/built-in.o: In function
`mainloop':
samples/bluetooth/peripheral/src/main.c:514: undefined reference
to `sys_rand32_get'
collect2: error: ld returned 1 exit status
Change-Id: Idec91d59fd98ec06f5e5728238cf9d9f6c37eb87
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Add battery level simulation decrementing from 100% by one every
second.
Change-Id: Ic6b819c32b42d65a044223f22e301835510823a4
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Manufacturer Name String in DIS is a mandatory feature for Heart Rate
profile as specified by HEART RATE PROFILE Spec.
Change-Id: I552b51b68012edfc4389604e91dd43b8b54fe65f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add Heart Rate simulation using 1 second sleeping loop and this is how
it is recommended in the Heart Rate Service Spec.
Change-Id: I1023a4089bc661a399acf865f4fc7afaf72b8f0f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This registers two simple callbacks for connection and
disconnection events.
Change-Id: I9e1f87d9e1a3c8ef457e15a1c30396fba7f7df4a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Implement Current Time write callback.
Change-Id: I2a6cb0b411c47e4d20ff34eadf8725bf23b0b7b9
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This field can be used to set the required permissions for an attribute
which can be checked by Bluetooth core before calling the callback.
Change-Id: Idcab8cdc5744358fab0b3c67b9c0503f1d1d9736
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Device Information Service along with model characteristics and
descriptor to the database table.
Change-Id: I28775cf48abe76d0a841ebc92e1579e2d4cdfa09
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This uses BT_GATT_CCC to declare CCC descriptors which makes the core
to managed the CCC configuration so the task don't have to do it.
Change-Id: Ied4fc7eaa1f9f3e6c23d4d5b20d5c26d606f93f4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
To implement CCC properly it is required to know the remote address since
it is per client, futhermore bt_gatt_notify requires an address where to
send the notification.
Change-Id: I9d9fdf72d668831bed76e2aef06816af3620f4b8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds write callback to CCC descriptors storing the value in a stack
variable.
Change-Id: I8cd2567c6fee730500b446192b73fc82d86ba1ff
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Notify property and Current Characteristic Configuration to Current
Time Service in peripheral app.
Change-Id: I44f36eea4f129c7b407b045da892f2ba88338592
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add Current Time Service currently providing hardcoded time since
there is no way of getting current time in the OS.
Change-Id: I9954d51f77905230a6dd180f37d3a48f379c69ec
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The file extension indicates a "Microkernel DEFinitions" file,
and no longer reflects the obsolete VxMicro/Viper branding.
Change-Id: Ib95b271404a4a4737e851d603c371244fa609e4d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
According to section 3.7 of Documentation/kbuild/makefiles.txt, using
EXTRA_CFLAGS in Makefiles is "still supported but their usage is
deprecated." However, using make EXTRA_CFLAGS="-DSOMETHING" results in
EXTRA_CFLAGS from Makefiles being overwritten, obviously breaking the
build. This patch converts to them to the newer ccflags-y which also
fixes the problem.
Change-Id: I6309439599d4c9cc184f9ecd941bde841982ef07
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These routines are either unused, or are always used in manner
that does not require their added security checking.
Change-Id: I6f484924ebc3d395a20879445a2fcabebf6c5014
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This commit changes the build parameter CONF_OVERLAY with the
name CONF_FILE.
Change-Id: I404a4aa87b167a9ca4e7b395d53c2f7794b232bc
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit adds the Makefiles to add sanity checks for
the bluetooth driver.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Iadfe6eb2662347a981393ffeb3e343f32c5f67f0
An extended inquiry response or advertising data packet shall not contain
more than one instance for each Service UUID data size.
Change-Id: I41d1a25fdcb2987e8d0cadfb2110fd62b3685f17
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Battery Service along with its characteristics and descriptors
to the database table.
Change-Id: Ifb83ebcb4d6cdafa5df84d643b2e2a69e5a6c1e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Heart Rate Service along with its characteristics and descriptors
to the database table.
Change-Id: Ibff52da7352883edccb7c5b903538a81aad2ba55
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds attributes for Generic Access Profile.
Change-Id: I1fe08429f80341e7ba9fc06ef35a6df9b5abbf84
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There's no point in enabling BLUETOOTH_DEBUG_HCI_CORE for the samples
as the user/developer is unlikely to be interested in this specific
sub-module of the Bluetooth stack. The samples already have the
BLUETOOTH_DEBUG enabled, so leave it up to the user/developer to
decide if they want to add specific sub-module debug options.
Change-Id: I327086464561667a2462db0aab00d0ffcdd40d4c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update the includes in the sample apps to match what their actual
dependencies are.
Change-Id: I6fdfa4ba0cda563433d51f0ec35fef8f2ee0fa40
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enabling HCI_CORE debug helps to identify possible bugs.
Change-Id: I13df39d63ee9b15f83503d86edc71733c7db94d5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Allowing to redefine QEMU_EXTRA_FLAGS helps to overcome user channel
stuck cases, you still have the possibility to use bluetooth over tcp
by specifying QEMU_EXTRA_FLAGS="-serial tcp:...". Default behavior
remains the same though.
Change-Id: I3a8190a1ca04029e788bfd424f3b3a3be9f2af75
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
It is not necessary to add any PRJ_INCPATH in order to build Bluetooth
samples.
Change-Id: I3ddb0a645e475d937a7067059e8bf5caa783a04e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Extend bt_start_advertising to make it possible to add any data type
instead of just the name.
Change-Id: I3f2afe1eb64aec51f321f7fd7439e97b3d67374c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Enable CONFIG_BLUETOOTH_DEBUG option for Bluetooth samples.
Change-Id: Id0d0377082b16f78f15c5e968c866bed2df69844
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This patch adds a simple app which initializes Bluetooth and enables
connectable advertising (i.e. starts acting in the LE peripheral
role).
Change-Id: I15bb43ce657b5592d32187a0dfd22ba8bd912641
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>