This disable debug options in order for the image to fit in boards
such as arduino_101 and quark_se_c1000_devboard.
For convenience this adds another configuration file with as it was
available previously which can be build using:
make CONF_FILE=prj_dbg.conf
JIRA: ZEP-2378
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove NET_UDP_HDR() macro as we cannot safely access UDP header
via it if the network packet header spans over multiple net_buf
fragments.
Fixed also the UDP unit tests so that they pass correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This will prepare test cases and samples with metadata and information
that will be consumed by the sanitycheck script which will be changed to
parse YAML files instead of ini.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This enabled testing CONFIG_BLUETOOTH_SHELL with configuration other
than btshell and enables ipsp sample to use bt shell module which
allows to disconnect, print metrics, etc.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some incompatible changes were introduced when net and bluetooth
branches were changed at the same time.
Change-Id: Ifa03f85d26a63ade0fcc029377d54850c0e92451
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Most of these macros are not exactly exposing a buffer, but a specific
header pointer (ipv6, ivp4, ethernet and so on), so it relevant to
rename them accordingly.
Change-Id: I66e32f7c3f2bc75994befb28d823e24299a53f5c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- net_pkt becomes a stand-alone structure with network packet meta
information.
- network packet data is still managed through net_buf, mostly named
'frag'.
- net_pkt memory management is done through k_mem_slab
- function got introduced or relevantly renamed to target eithe net_pkt
or net_buf fragments.
- net_buf's sent_list ends up in net_pkt now, and thus helps to save
memory when TCP is enabled.
Change-Id: Ibd5c17df4f75891dec79db723a4c9fc704eb843d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There have been long lasting confusion between net_buf and net_nbuf.
While the first is actually a buffer, the second one is not. It's a
network buffer descriptor. More precisely it provides meta data about a
network packet, and holds the chain of buffer fragments made of net_buf.
Thus renaming net_nbuf to net_pkt and all names around it as well
(function, Kconfig option, ..).
Though net_pkt if the new name, it still inherit its logic from net_buf.
'
This patch is the first of a serie that will separate completely net_pkt
from net_buf.
Change-Id: Iecb32d2a0d8f4647692e5328e54b5c35454194cd
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
TCP requires buffers to be acked thus it retain a reference, but L2
driver actually consumes the buffer so it needs a context pool to store
to original ones.
Change-Id: Ie9083ab361d3674c33080f9e7e6c7248aaf7abc3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Docs need a label at the top so we can use :ref:`labelname`
to create a link to that doc from other docs.
Change-Id: Ide66f75ca8fac0d5f65fbfc50dc9d130cf45b392
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
s/SAMPLES/APP for name shortening. Applying the change where relevant.
Not only IP addresse will be available as samples settings there but
also IEEE 802.15.4 channel, pan_id, and more for instance.
Change-Id: I05dd24989bd0c804d9588092d67044a3e063bc88
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This may cause static analyser error such as the following:
Null-checking "tmp" suggests that it may be null, but it has already
been dereferenced on all paths leading to the check.
if (tmp) {
Change-Id: Id04f8d052d8128003d5b91f7a8303940529ef261
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If we receive lot of packets, it might happen that we exhaust
all the DATA buffers in the system. This would prevent from
us sending anything to the network.
Change this by splitting the DATA buffer pool into RX and TX
parts. This way RX flooding cannot consume all DATA buffers
that needs to be sent.
Change-Id: I8e8934c6d5fdd47b579ffa6268721b5eb3d64b6d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit changes the net_buf getter functions in nbuf.h
by adding a timeout parameter. These function prototypes
are changed to accept a timeout parameter.
net_nbuf_get_rx()
net_nbuf_get_tx()
net_nbuf_get_data()
net_nbuf_get_reserve_rx()
net_nbuf_get_reserve_tx()
net_nbuf_get_reserve_data()
net_nbuf_copy()
net_nbuf_copy_all()
net_nbuf_push()
net_nbuf_append()
net_nbuf_write()
net_nbuf_insert()
Following convinience functions have not been changed
net_nbuf_append_u8
net_nbuf_append_be16
net_nbuf_append_be32
net_nbuf_insert_u8
net_nbuf_insert_be16
net_nbuf_insert_be32
net_nbuf_write_u8
net_nbuf_write_be16
net_nbuf_write_be32
so they call the base function using K_FOREVER. Use the
base function if you want to have a timeout when net_buf
is allocated.
Change-Id: I20bb602ffb73069e5a02668fce60575141586c0f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This enables these samples to interoperate with Linux 6LoWPAN over
Bluetooth implementation while that is being fixed, in the long term
we might remove it from the samples once Linux is fixed.
Jira: ZEP-1656
Change-Id: I8ca9fe5a27f43cebc75b6fe5a436a5e8fcee26d5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Currently, the function accepts a struct sockaddr * but the code
immediately type casts this to either in_addr or in6_addr. This is
incorrect behavior as the first field in a sockaddr is sa_family_t
and not address data.
So without special knowledge, a developer will use a sockaddr structure
as the parameter and then wonder why the address information isn't being
set correctly.
Let's change this parameter to void * which makes this function similar
to inet_pton().
Jira: ZEP-1616
Change-Id: I1fc9368da999d90feb07c03fac55dcc749d4eba6
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Instead of using a hard-coded string, make the sample use the Kconfig
variable for the device name.
Change-Id: Ib09f594e1cba221f9064318572bd90d38bd2733a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The original buffer fragments can be used to send back a reply directly
since Bluetooth doesn't add anything to then.
Change-Id: Ifeac0e6c3abbd527c79912abc5f5b833b0b52171
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove legacy option and use SYS_CLOCK_EXISTS where appropriate.
Change-Id: I3d524ea2776e638683f0196c0cc342359d5d810f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This port ipsp sample to use the native stack so it can be used once
again.
Change-Id: I7975b017b0aa5bd81a1701692ec81527e39d4701
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This commit removes the legacy Contiki based uIP stack.
The new native IP stack must be used after this commit.
The commit also removes following things:
- legacy cc2520 driver
- legacy ethernet drivers
- legacy IP stack samples
and changes these things:
- disabled tests that only work for legacy IP stack
- select new IP stack by default
- enable random number generator by default as it is needed
by the new IP stack
Change-Id: I1229f9960a4c6654e9ccc6dac14a7efb9394e45d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Switch left-over usage of TICKS_NONE and TICKS_UNLIMITED to the new
unified kernel counterparts K_NO_WAIT and K_FOREVER.
Change-Id: I2f2a16360e816f9f8791eb216deb3c70b8cc87df
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove those from Makefiles and testcase.ini, we now support unified kernel
only and sanitycheck script now knows how to deal with this.
Change-Id: I853ebcadfa7b56a4de5737d95f2ba096babb2e13
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This makes all Bluetooth samples and tests being build with unified
kernel. main() is now executed from init thread and specifying task
for it in mdef file is no longer needed. By default main stack is
1024 bytes and this should be enough for BT samples.
Change-Id: I6674eea2c028b78ada5190acef72937186738af2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
CONFIG_ARC_INIT defaults to 'n' now days so there's no reason to try
to explicitly disable it in the sample config files.
Change-Id: I88df06ba23bdac697f0767384f7b88e3bd9fced9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This removes ipss_listen since it does depend on the old network stack it
cause build problems with yaip and anyway its code is only used by ipsp
sample while the net samples does not use ipss_listen at all.
Change-Id: I23987670548741bde8800115d473a3bab242153b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tags should be separated with spaces no with comma.
Change-Id: I5381200bcd0caf59f3601ec849d698966c734a28
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
$srctree for the application might not be set to be $ZEPHYR_BASE, use
$ZEPHYR_BASE instead to be more explicit in the build.
Change-Id: Iefa5ff59f246b584949329044f7a6531adc6ed62
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Setting CONFIG_ARC_INIT=n in prj.conf make it possible to use same
config for both QEMU and Arduino 101 targets.
Change-Id: Ie4f549d5721f2b87077fba8787f5b1e2a8f07680
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This removes the section explaining how to test the IPSP from the general
README moving it ipsp specific README which can be expanded to include
other specific details related to 6LoWPAN, etc.
Change-Id: I80210cacb6b0042b3b0dc570dbdf7d38f92b3031
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This add CONFIG_BLUETOOTH_DEBUG_LOG which depends on SYS_LOG since the
later can actually use either CONFIG_PRINTK or CONFIG_STDOUT_CONSOLE.
Change-Id: Ib2974d1331f6c91d119a218ec95e8bf01069377b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
By calling the microkernel entry point 'main' there's no need to have
extra hacks to share the same c-file with both nano and micro
configurations.
Change-Id: I6623855a87ef8624b2bddb75b95079521e0eab8b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The old 'config_whitelist' directive in testcase.ini has been removed.
We use the new expr_parser module to parse a 'filter' directive which
is a boolean expression. This gives a great deal more flexibility
in how tests can be filtered.
To keep the tree bisectable, use of config_whitelist in testcase.ini
converted to the new expression language.
Change-Id: I0617319818c5559c0f0569d2fa73d09b681cac51
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This prepares for adding other debug types besides the printf-style
logging to the console.
Change-Id: Ic2ed305192491734da991c4f61fdaace03fd60f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add config files to be used on Arduino 101 (or any Curie-based) board
with the MyNewt nimble stack running on the nRF51 and exposing HCI
over UART. These configs contain a stripped-down set of features so
that the resulting image fits e.g. on the Arduino 101.
Change-Id: I7300e9ca4205de6f52aa6ca1bfe4e0b011b6dcbe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Exclude STM32F103RB based platforms from the test. The SRAM is overflown
by 14kB.
Change-Id: I37c2905ed2706a89d9a199bc49518937659ac997
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
This moves IPSS sample code to samples/bluetooth/gatt which shall become
the default place for GATT related samples that can be reused.
Change-Id: I04089f6e43bfcc30ee1c7cc766620f19e3dad08e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Accourding to the spec the IP Support Service shall be instantiated as
a «Primary Service».
Change-Id: Ief0a2729c2752a33c8e7d4d9fae017c22e969e61
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure NETWORKING_WITH_6LOWPAN and 6LOWPAN_COMPRESSION_IPHC are
selected properly and update IPSP sample to only include the minimal
config options so it can test if this is working properly.
Change-Id: I2565cbd4f79d91eaba348d43933aa893c6dc6ace
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since the return value of these callbacks is a number of bytes ssize_t
is more appropriate than int.
Change-Id: I3406fb382975d62f51e7a195666d0ae88364fd2c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This make it possible to include IPSP services in other samples.
Change-Id: If6eaecd8bab85a382b2da623b06603f6c98aef59
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
To exclude platform platform_exclude=foo should be used and not
platform_whitelist=!foo.
Change-Id: I4cddcd3b73e0bd8c42a0726776f8237ebd79a6ae
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
TinyCrypt provides implementation of AES CMAC so there is not need
for internal implementation in SMP code.
Change-Id: I15fe0daf8fca8c44b002636983b46502419c57a5
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This option is not needed as none of sample uses sys_rand32_get.
Change-Id: I00620a2fa7ea926d09e4e8f86cbf8ca7080478b3
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Add a single option for enabling use of TinyCrypt library for
crypto. This option selects all required TinyCrypt options
depending on BT features enabled. Thanks to this applications
only need to select single option instead of set of required
TinyCrypt features.
Change-Id: I2862e9ad3e204635f2ed3199433982bcfb7112f6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This enables sanitycheck to build for Arduino Due.
Note that there is no on-board bluetooth so bluetooth tests
are skipped.
Change-Id: I4f564e68ec65f01b7b33a32f6d0d7749290c0e5b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This way we avoid bugs coming from wrongly (human) counted length.
Change-Id: I95eb87a78fc12d4c5e083ce1c65d8b690ad8db78
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way we don't need a special BT_BYTES macro and avoid bugs coming
from wrongly counted number of bytes (which is now evaluated at
build-time).
Change-Id: Ic6319234a816fe2fab6229b3bb980d0e3503e241
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There is no need to keep arch specific prj.conf for these samples are
they are always the same.
Change-Id: I0f93b5a47458f9800a6654cc45914b911b42b3e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is essential so that the application can be notified of
connection failures and also be able to know the reason for the
disconnection.
Change-Id: I30108958963f6aeac690612bb26738dc4c67ca80
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update the advertising API according to what has recently been
discussed and agreed upon.
Naming-wise the most important change is the removal of "EIR" which
was confusing since this is mainly used with LE at the moment. The
Core Specification Supplement consistently uses the generic terms data
and data type to describe what we're dealing with here, so the new
names are bt_data and BT_DATA.
Another change is to detach the actual data from the struct by
converting it from an array to a pointer. This is not only essential
for supporting BR/EDR (which has a different length) but to also
minimize memory usage.
Another change is to require the caller of bt_le_adv_start() to
provide the array lengths of the ad and sd paramters. This way we
don't have to have the empty (8-byte) element at the end of each
array.
Lastly, the bt_le_adv_start() logic is slightly modified so that it
will always clear the respective data if necessary. Previously the
user might have been left with a previous callers data if it passed
NULL to the API.
Change-Id: I318026ceb1b52bb688edf4dcfed82613bd15c3e1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This makes it simpler to add the services directly into GATT services
table.
Change-Id: I090c7f9396329cf524947dd6647230c663a55f60
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
PROJECTINCLUDE is not required in app makefiles.
Change-Id: I3751b7c51c453dfe47d207bb11d171138668c4e7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Now that the H:4 driver is the default it doesn't have to be
explicitly enabled anymore. The only exception is the "no default
driver" option that's needed by the test_bluetooth unit test.
Change-Id: Ie582d51202714e314b76ffa9659c7a232a18fc1a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We'll need to have a much more flexible LE advertising API. This is a
first step in that direction. A convenience BT_LE_ADV() macro is
provided to ease converting application code.
Change-Id: I74854487bbdfb4b1cf1bee0b6351d1750a56ff86
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To have a clear split between LE & BR/EDR rename these APIs with the
appropriate prefixes.
Change-Id: I983df2b5880947d96f0ad289d12f3383f44894be
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The data length was incorrect which caused the name to be truncated.
Change-Id: Ieaca7745fff89f0f5689b6d15bfc0386f59add47
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For test purpose pass NULL to bt_enable so it blocks until init
sequence is complete.
Change-Id: I875ff9a59bb3d1d2e799db6fc967da3aee3ac77a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This application uses Bluetooth IP driver to listen to UPD port and
echo back the data received.
Change-Id: Id8e58f5f8bf58ff5947441cbcb3131c0da27081c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
