Move all bluetooth testcases to tests/ and change Makefiles
accordingly where applicable.
Also fix Makefile to make some variables overridable and reduce
level of whitelisting in testcase.ini.
Change-Id: Ia71ee1fbbb238c45280b1e3c4747ca2f748f5263
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This allows to decrease number debug messages using config option.
Change-Id: I987d25c6d4b18503d6beb7feab97e9207100323d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This option is not needed as none of sample uses sys_rand32_get.
Change-Id: I00620a2fa7ea926d09e4e8f86cbf8ca7080478b3
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This enables sanitycheck to build for Arduino Due.
Note that there is no on-board bluetooth so bluetooth tests
are skipped.
Change-Id: I4f564e68ec65f01b7b33a32f6d0d7749290c0e5b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Enabling BLUETOOTH_DEBUG enables also serial console conflicting with
tester reusing the same UART.
Change-Id: I8058a019e61146ff05cc44ab543cf6ec9ff418ef
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This way we avoid bugs coming from wrongly (human) counted length.
Change-Id: I95eb87a78fc12d4c5e083ce1c65d8b690ad8db78
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way we don't need a special BT_BYTES macro and avoid bugs coming
from wrongly counted number of bytes (which is now evaluated at
build-time).
Change-Id: Ic6319234a816fe2fab6229b3bb980d0e3503e241
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Board already defined in platform_whitelist
Change-Id: I2fed4b3c0663fd15d43ee697837a89439f7bd07a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Putting right target allows to build for arduino_101.
Change-Id: Ib11244c7f024c72f0ab0b15549be57c576bdef3c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In addition to having a different CONF_FILE bt_enable needs to be given
a callback since nble driver cannot block while initializing.
Change-Id: I8bd2c79d0620e93dbecfef25c49c5529ff1ee954
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is no need to keep arch specific prj.conf for these samples are
they are always the same.
Change-Id: I0f93b5a47458f9800a6654cc45914b911b42b3e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Update the advertising API according to what has recently been
discussed and agreed upon.
Naming-wise the most important change is the removal of "EIR" which
was confusing since this is mainly used with LE at the moment. The
Core Specification Supplement consistently uses the generic terms data
and data type to describe what we're dealing with here, so the new
names are bt_data and BT_DATA.
Another change is to detach the actual data from the struct by
converting it from an array to a pointer. This is not only essential
for supporting BR/EDR (which has a different length) but to also
minimize memory usage.
Another change is to require the caller of bt_le_adv_start() to
provide the array lengths of the ad and sd paramters. This way we
don't have to have the empty (8-byte) element at the end of each
array.
Lastly, the bt_le_adv_start() logic is slightly modified so that it
will always clear the respective data if necessary. Previously the
user might have been left with a previous callers data if it passed
NULL to the API.
Change-Id: I318026ceb1b52bb688edf4dcfed82613bd15c3e1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
PROJECTINCLUDE is not required in app makefiles.
Change-Id: I3751b7c51c453dfe47d207bb11d171138668c4e7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Now that the H:4 driver is the default it doesn't have to be
explicitly enabled anymore. The only exception is the "no default
driver" option that's needed by the test_bluetooth unit test.
Change-Id: Ie582d51202714e314b76ffa9659c7a232a18fc1a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We'll need to have a much more flexible LE advertising API. This is a
first step in that direction. A convenience BT_LE_ADV() macro is
provided to ease converting application code.
Change-Id: I74854487bbdfb4b1cf1bee0b6351d1750a56ff86
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To have a clear split between LE & BR/EDR rename these APIs with the
appropriate prefixes.
Change-Id: I983df2b5880947d96f0ad289d12f3383f44894be
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Setting up new platforms to handle emulation, and make them the only
ones able to run on QEMU from the Makefile "qemu" target to avoid
confusion with other platforms. We have now platform qemu_x86 and
platform qemu_cortex_m3, also modification to the sanity checks to have
qemu support only on those platforms
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Change-Id: I9291918a1d58fea4f37750ada78234628f9a5d98
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Refactors existing menu by putting as topmost selectable option
general bluetooth subsystem support instead so far Low Energy (LE).
Implication of the change is introduction of new BLUETOOTH_LE config
flag. The flag needs to be propagated to all existing bluetooth
related apps to make them buildable.
Change-Id: I608c1baad038e0ee4cccf44a3e597e16ae1f7f54
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
We need to be able to perform the init procedure asynchronously
through a callback. The RX fiber is a good candidate to use for the
callback since it's not active in its normal operation before
drv->open has been called. In order to prepare for a future
bt_disable() API the init API is renamed from bt_init() to
bt_enable(). If a NULL pointer is given as the callback the API
behaves synchronously like the old bt_init().
Change-Id: I4e78fa8f32dcf5477ea05a8db75aca5cdce591fd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The online help ./scripts/sanitycheck --help describes usage.
Most users will simply want to run with no arguments.
Change-Id: Icedbbfc22599a64a6e3dbbb808ff3276db06f2e0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Renames supported platform configurations to conform to new platform
configuration naming scheme.
Example usage with PLATFORM_CONFIG:
make PLATFORM_CONFIG=basic_cortex_m3
make PLATFORM_CONFIG=basic_atom
make PLATFORM_CONFIG=basic_minuteia
make PLATFORM_CONFIG=galileo
xxx_ti_lm3s6965_defconfig -> xxx_basic_cortex_m3_defconfig
xxx_generic_pc_atom_n28xx_defconfig -> xxx_basic_atom_defconfig
xxx_generic_pc_minuteia_defconfig -> xxx_basic_minuteia_defconfig
xxx_quark_defconfig -> xxx_galileo_defconfig
Change-Id: I696eb8b9ad9a72d7a72efbe1341ce23500335764
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Uses PLATFORM_CONFIG to specify the configuration file instead of
KBUILD_DEFCONFIG. This name is more intuitive to Zephyr users and
it is not tied to kbuild.
Example usage:
make PLATFORM_CONFIG=generic_pc_atom_n28xx
make PLATFORM_CONFIG=generic_pc_minuteia
make PLATFORM_CONFIG=quark
make PLATFORM_CONFIG=ti_lm3s6965
make PLATFORM_CONFIG=fsl_frdm_k64f
Change-Id: I177608942c3e77c2f152743c862aad1d460c0e33
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes default KBUILD_DEFCONFIG to xxx_generic_pc_atom_n28xx_defconfig as
the xxx_generic_pc_defconfig configuration will not be supported in the future.
Note that like generic_pc, atom_n28xx runs on QEMU.
Change-Id: I49c5708e4b24dbf723eefc1efddfea4174d9cb1c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Bluetooth sample projects now use KBUILD_DEFCONFIG instead of BSP. This is
a necessary step in transitioning from BSPs to platforms.
Change-Id: I42c89d0b5c3d7de7ea62297950bb00f56ca97ed2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
For consistency, when including public header files, use <> rather
than "".
Change-Id: Id780388759c33d865f49c9e0faf9cde2251ca869
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The source is included to the manual and putting more comments helps
to understand the code.
Change-Id: Iefd6db2abf6070fd8c3fabdaf4946bdd7a045544
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fixes compile errors:
...
Makefile:36: /make/env/defs.base: No such file or directory
Makefile:47: /target/make.ukernel: No such file or directory
make: *** No rule to make target '/target/make.ukernel'. Stop.
...
Change-Id: I693a939510b732ac810d5af756422c58e3f0c3ab
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Updates references to this environment variable, which were missed
during previous renamings.
Change-Id: I1126271ce8b84d3eaedeab11198d3a3b645393af
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The file extension indicates a "Microkernel DEFinitions" file,
and no longer reflects the obsolete VxMicro/Viper branding.
Change-Id: Ib95b271404a4a4737e851d603c371244fa609e4d
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Length of "Test beacon" is 11 + 1 of type that should be 12 not 16.
In addition to that make the data variable static since they are only
used locally.
Change-Id: I2d7fb16cf7d383dafc9b083da6cd63a4d9be21c0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There's no point in enabling BLUETOOTH_DEBUG_HCI_CORE for the samples
as the user/developer is unlikely to be interested in this specific
sub-module of the Bluetooth stack. The samples already have the
BLUETOOTH_DEBUG enabled, so leave it up to the user/developer to
decide if they want to add specific sub-module debug options.
Change-Id: I327086464561667a2462db0aab00d0ffcdd40d4c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update the includes in the sample apps to match what their actual
dependencies are.
Change-Id: I6fdfa4ba0cda563433d51f0ec35fef8f2ee0fa40
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enabling HCI_CORE debug helps to identify possible bugs.
Change-Id: I13df39d63ee9b15f83503d86edc71733c7db94d5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Allowing to redefine QEMU_EXTRA_FLAGS helps to overcome user channel
stuck cases, you still have the possibility to use bluetooth over tcp
by specifying QEMU_EXTRA_FLAGS="-serial tcp:...". Default behavior
remains the same though.
Change-Id: I3a8190a1ca04029e788bfd424f3b3a3be9f2af75
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Adds a sample which initializes Bluetooth and enables non-connectable
advertising (i.e. starts acting in the LE broadcaster role).
Change-Id: Ic554b1354464b357b44215af1c0b613f123aeb5d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
