- simplify dummy thread initialization to a kswap.h
inline function
- use the same inline function for both early boot and
SMP setup
- add a note on necessity of the dummy thread even if
a custom swap to main is implemented
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Several reviewers agreed that DT_HAS_NODE_STATUS_OKAY(...) was an
undesirable API for the following reasons:
- it's inconsistent with the rest of the DT_NODE_HAS_FOO names
- DT_NODE_HAS_FOO_BAR_BAZ(node) was agreed upon as a shorthand
for macros which are equivalent to
DT_NODE_HAS_FOO(node) && DT_NODE_HAS_BAR(node) &&
- DT_NODE_HAS_BAZ(node), and DT_HAS_NODE_STATUS_OKAY is an odd duck
- DT_NODE_HAS_STATUS(..., okay) was viewed as more readable anyway
- it is seen as a somewhat aesthetically challenged name
Replace all users with DT_NODE_HAS_STATUS(..., okay), which is
semantically equivalent.
This is mostly done with sed, but a few remaining cases were done by
hand, along with whitespace, docs, and comment changes. These special
cases include the Nordic SOC static assert files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
C++ is documented to be supported in applications, so it should be
supported in SYS_INIT() functions run at the application init level.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When the device driver model got introduced, there were no concept of
SYS_INIT() which can be seen as software service. These were introduced
afterwards and reusing the device infrastructure for simplicity.
However, it meant to allocate a bit too much for something that only
required an initialization function to be called at right time.
Thus refactoring the devices structures relevantly:
- introducing struct init_entry which is a generic init end-point
- struct deviceconfig is removed and struct device owns everything now.
- SYS_INIT() generates only a struct init_entry via calling
INIT_ENTRY_DEFINE()
- DEVICE_AND_API_INIT() generates a struct device and calls
INIT_ENTRY_DEFINE()
- init objects sections are in ROM
- device objects sections are in RAM (but will end up in ROM once they
will be 'constified')
It also generate a tiny memory gain on both ROM and RAM, which is nice.
Perhaps kernel/device.c could be renamed to something more relevant.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Rename DT_HAS_NODE to DT_HAS_NODE_STATUS_OKAY so the semantics are
clear. As going forward DT_HAS_NODE will report if a NODE exists
regardless of its status.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert various DT_CCM_* macros to use DT_CHOSEN(zephyr_ccm) and
associated macros from devicetree.h.
We remove CCM references from cortex_a and cortex_r linker scripts as
its only a feature on Cortex-M STM32 SoCs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert various DT_DTCM_* macros to use DT_CHOSEN(zephyr_dtcm) and
associated macros from devicetree.h.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace CONFIG_ENTROPY_NAME with DT_CHOSEN_ZEPHYR_ENTROPY_LABEL. We now
set zephyr,entropy in the chosen node of the device tree to the entropy
device.
This allows us to remove CONFIG_ENTROPY_NAME from dts_fixup.h. Also
remove any other stale ENTROPY related defines in dts_fixup.h files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This adds a sys init level which allows device and sys_init
to be done after SMP initialization, z_smp_init(), when all
cores are up and running.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The set of interrupt stacks is now expressed as an array. We
also define the idle threads and their associated stacks this
way. This allows for iteration in cases where we have multiple
CPUs.
There is now a centralized declaration in kernel_internal.h.
On uniprocessor systems, z_interrupt_stacks has one element
and can be used in the same way as _interrupt_stack.
The IRQ stack for CPU 0 is now set in init.c instead of in
arch code.
The extern definition of the main thread stack is now removed,
this doesn't need to be in a header.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This function had a to sys_rand_get() even without random source. As
Zephyr is built with linkage garbage collection and this function is
called only if either ENTROPY_HAS_DRIVER or TEST_RANDOM_GENERATOR is
enabled and these options automatically enable a random source.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Use of the _current_cpu pointer cannot be done safely in a preemptible
context. If a thread is preempted and migrates to another CPU, the
old CPU record will be wrong.
Add a validation assert to the expression that catches incorrect
usages, and fix up the spots where it was wrong (most important being
a few uses of _current outside of locks, and the arch_is_in_isr()
implementation).
Note that the resulting _current expression now requires locking and
is going to be somewhat slower. Longer term it's going to be better
to augment the arch API to allow SMP architectures to implement a
faster "get current thread pointer" action than this default.
Note also that this change means that "_current" is no longer
expressible as an lvalue (long ago, it was just a static variable), so
the places where it gets assigned now assign to _current_cpu->current
instead.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Only dump data when we are interested in the analysing coverage. By
default just collect the data.
CONFIG_COVERAGE_DUMP is used to control this behaviour.
This will help speed up sanitycheck and will avoid lots of noise in the
log when some tests with coverage enabled failed. Dumping data to
console is also suspected to be one of the reason why qemu hangs in CI.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The original implementation left this function hidden in init.h which
prevented it from showing up in documentation. Move it to kernel.h,
and document it consistent with the other functions that allow caller
customization based on context.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
We have been using thread, th and t for thread variables making the code
less readable, especially when we use t for timeouts and other time
related variables. Just use thread where possible and keep things
consistent.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Just use printk directly instead of going over defines.
For some reason, this change lets us pass on master when running
tests/kernel/timer/timer_monotonic test. This test started failing after
rc2 was tagged, just because the changing git version string passing to
BUILD_VERSION. This is still under investigation.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In some platforms the size of size_t can be different of 4 bytes. Use
sys_rand_get to proper fill this variable.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The main and idle threads, and their associated stacks,
were being referenced in various parts of the kernel
with no central definition. Expose these in kernel_internal.h
and namespace with z_ appropriately.
The main and idle threads were being defined statically,
with another variable exposed to contain their pointer
value. This wastes a bit of memory and isn't accessible
to user threads anyway, just expose the actual thread
objects.
Redundance MAIN_STACK_SIZE and IDLE_STACK_SIZE defines
in init.c removed, just use the Kconfigs they derive
from.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These are renamed to z_timestamp_main and z_timestamp_idle,
and now specified in kernel_internal.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface and
has been renamed z_arch_kernel_init().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Our thread struct gets initialized piecewise in a bunch of locations
(this is sort of a design flaw). The is_idle field, which was
introduced to identify idle threads in SMP (where there can be more
than one), was correctly set for idle threads but was being left
uninitialized elsewhere, and in a tiny handful of cases was turning up
nonzero.
The case in pipes. was particularly vexsome, as that isn't a thread at
all but one of the "dummy" threads used for timeouts (another design
flaw IMHO).
Get this right everywhere.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The boot time measurement sample was giving bogus values on x86: an
assumption was made that the system timer is in sync with the CPU TSC,
which is not the case on most x86 boards.
Boot time measurements are no longer permitted unless the timer source
is the local APIC. To avoid issues of TSC scaling, the startup datum
has been forced to 0, which is in line with the ARM implementation
(which is the only other platform which supports this feature).
Cleanups along the way:
As the datum is now assumed zero, some variables are removed and
calculations simplified. The global variables involved in boot time
measurements are moved to the kernel.h header rather than being
redeclared in every place they are referenced. Since none of the
measurements actually use 64-bit precision, the samples are reduced
to 32-bit quantities.
In addition, this feature has been enabled in long mode.
Fixes: #19144
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This commit adds a DTCM (Device Tightly Coupled Memory) section for
Cortex F7 MCUs. The Address and length is defined in the corresponding
device tree file.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
move misc/stack.h to debug/stack.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/gcov.h to debug/gcov.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/dlist.h to sys/dlist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move entropy.h to drivers/entropy.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move tracing.h to debug/tracing.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Zephyr has two unrelated build _VERSIONs: KERNEL_VERSION and
BUILD_VERSION. Prefix them slightly differently in BOOT_BANNER so anyone
can instantly zoom in on which one is being used without having to
compare the implementation details of both.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
LCOV/gcovr doesn't understand what CODE_UNREACHABLE means.
Adding LCOV_EXCL_LINE to the macro definition unfortunately
doesn't work.
Exclude a bit of code which spins endlessly when multi-
threading is disabled that runs after the coverage report
is dumped.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We don't get any coverage past when we dump the coverage data,
so exclude the end of the function and move setting the main
thread as nonessential to immediately before the coverage dump.
The comment was also amended.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
data copying and bss zero are called from arch code
before z_cstart(), and coverage data gathering doesn't
work properly at that point. Not all arches use this
code anyway, some do it in optimized assembly instead.
Weak main() is also excluded; it does nothing and every
test overrides it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Change removes tracing hooks before threads are initialized
and thread switched out hook for ARM before first time switching
to main thread.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
This name collides with one in the bt subsystem, and wasn't named in
proper zephyrese anyway.
Fixes#16604
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
We had both kernel and os as domains covering low level layers, just use
one and fix the issue of the os domain not being registered.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Memory boundaries are declared as extern char arrays which can be used
directly rather than casting their addresses. The cast to u32_t also
breaks 64-bit builds.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Remove a redundant #ifdef CONFIG_MULTITHREADING guard
for a code block already inside CONFIG_MULTITHREADING.
Add some inline #endif comments for ease of reading.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For architectures with custom swap to main, currently:
- arm
- posix
we are now using K_THREAD_STACK_SIZEOF macro to pass the
main thread stack size to z_arch_switch_to_main_thread().
This does not introduce any behavioral changes for posix;
the K_THREAD_STACK_SIZEOF() simply returns the sizeof()
the stack object. For Arm, this allows us to clean-up one
more occurence of CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT
in kernel_arch_func.h.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This macro is slated for complete removal, as it's not possible
on arches with an MPU stack guard to know the true buffer bounds
without also knowing the runtime state of its associated thread.
As removing this completely would be invasive to where we are
in the 1.14 release, demote to a private kernel Z_ API instead.
The current way that the macro is being used internally will
not cause any undue harm, we just don't want any external code
depending on it.
The final work to remove this (and overhaul stack specification in
general) will take place in 1.15 in the context of #14269Fixes: #14766
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
