By this commit USB audio class implementation is introduced
to Zephyr.
The Zephyr USB audio device class follows bellow
documentations:
- Universal Serial Bus specification rev2.0 (usb20.pdf)
- Universal Serial Bus Device Class Definition for Audio Devices
(audio10.pdf)
- Universal Serial Bus Device Class Definition for Audio Data Formats
(frmts10.pdf)
- Universal Serial Bus Device Class Definition for Terminal Types
(termt10.pdf)
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This commit introduces dedicated return type for custom_handler.
Relevant code is updated to fulfill the API documentation.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This exception allows USB Audio Class to properly respond to the
interface requests.
This commit is temporary solution and shall not be considered as
valid solution for other classes.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Add two new kconfig options USB_SELF_POWERED and USB_MAX_POWER.
These can be set by the user to change the USB configuration descriptor.
USB_MAX_POWER can be set to any value between 0 and 250, but practically
should be 50 or 250. These values are half the ammount of mA that the
device will tell the host that it needs.
USB_SELF_POWERED sets the 7th bit in bmAttributes of the USB config
descriptor. Should be set to y if the device has its own power source
other than USB.
Signed-off-by: Barry Solomon <barry.solomon@dexcom.com>
By this commit user gets possibility to register USB
device satutus callback. This callback represents device state
and is added so user could know what happend to USB device.
Callback is registered by providing it to usb_enable()
USB api is extended by this callback handler.
Samples using using USB are by default provide no callback
and the usb_enable() is called with NULL parameter.
Status callback registered by hid class is deleted as now
USB device has global callback for all classes within device.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This commit renames two defines:
CS_INTERFACE -> USB_CS_INTERFACE_DESC
CS_ENDPOINT -> USB_CS_ENDPOINT_DESC
in order to match current naming convention when it comes
to descriptors fields.
All relevant files are updated to match renamed macros.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Some of defines are present in several header files.
Those defines are the same with value but with different naming.
Common defines are brought to usb_common.h
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
According to API documentation, the bcdDevice field of the USB
descriptor is supposed to represents the Zephyr kernel major
and minor versions as a binary coded decimal value. However,
when using zephyr 2.0, bcdDevice is shown as 0.00 instead of 2.00.
This is due to a typo in the implementation of the BCD macro in
usb_commond.h. This commit fixes the macro.
Signed-off-by: Arnaud Taffanel <arnaud@bitcraze.io>
Several macros were documented as deprecated but lacked the
infrastructure to produce deprecation warnings. Add the deprecation
marker, and fix the in-tree references to the deprecated spellings.
Note that one non-deprecated macro should have been deprecated, and
is, referring to a newly added line control bit.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
USBD_CFG_DATA_DEFINE macro has not consider that a class
could have more than one set of usb_cfg_data struct.
If a class has more than one set of usb_cfg_data
then they should be sorted the same way like by
USBD_DEVICE_DESCR_DEFINE macro.
Fixes: #16240
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
As seen previously, some toolchain are willing to insert padding
at section changes to apply greater alignments by default. This is
especially true with 64-bit builds. USB structures are marked with the
packed attribute and therefore the linker section they land into
must also be byte aligned.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Remove duplicated execution path for composite configuration, USB
device stack initialization is done inside stack for both cases.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In order to unify the legacy and composite code, move the class and
vendor request handler buffer into the USB device code, just like in
composite mode. The option is renamed from USB_COMPOSITE_BUFFER_SIZE
into USB_REQUEST_BUFFER_SIZE and also replaces the USB_DFU_MAX_XFER_SIZE
and USB_HID_MAX_PAYLOAD_SIZE options.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Added bBreak, bRingSignal, bFraming, bParity and bOverRun
handling in cdc_acm_line_ctrl_set.
Reference: Chapter 6.5.4 of Universal Serial Bus Communications Class
Subclass Specification for PSTN Devices rev 1.2
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Merge cb_usb_status_composite and cb_usb_status and use common
forward_status_cb for both composite and normal devices.
Fixes#14882
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Generally when DFU is in progress, the system is not expected to
be doing anything else in addition. Hence, a completion signal
would help the system to know that DFU is over and it can proceed
towards next tasks.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Added macro that generates simple report descriptor for keyboard.
Added enums for standard button codes, keyboard modifiers
and keyboard LEDs.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
This commit adds support for remote wakeup and extends USB api
with a wakeup request call. Remote wakeup can be dsabled in kconfig
when a specific driver does not support this feature.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
Add HID Device associated with the instance of the HID. This allows to
create several HID instances for multifunction composite device.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add new status callback with usb_cfg_data parameter to be able to
identify instance callback.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add interface parameter to interface configuration callback to be able
to configure several instances of the same class.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This allows to place instances of the class one after another in the
linker section.
Fixes#12908
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Added macro that generates simple report descriptor for mouse.
This improves the readability of hid-mouse sample.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Idle rate functionality has been implemented for HID USB class.
Bassed on Device Class Definition for Human Interface Devices 1.11.
Tested with USB3CV and host with idle rate.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Adding status callback allows to control report sending only when i.e.
device is connected or configured.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add USB_DBG, USB_WRN, USB_ERR, USB_INF macros
in usb_device header file and remove them
from usb device drivers.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Fix misspellings in header file doxygen comments used to generate API
documentation, missed during regular reviews.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
patch add a OUT interrupt endpoint descriptor and registers a
corresponding notification callback with usb driver, which is invoked
when data is sent to device from host.
Implement the read ready notification as suggesteed by
Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
A HID application can no longer write to the default
interrupt IN endpoint because the addresses are assigned
dynamically. Add hid_int_ep_write() function and leave
it to the hid-core to call the usb_write() with the correct
endpoint address.
fixes: #8424
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Introduce function to configure interface descriptor at runtime.
It is simple to leave the corresponding function to configure the
interface descriptor and fix bInterfaceNumber and iInterface values,
for example.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Add the routine to validate endpoint address and update the endpoint
descriptors and usb_ep_cfg_data at runtime.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>