Currently this is useful only for some internal applications that
iterate over the device table, since applications can't get access to
a device that isn't ready, and devices can't be made unready. So it's
introduced as internal API that may be exposed as device_ready() when
those conditions change.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Device objects in Zephyr are currently placed into an array by linker
scripts, making it easy to iterate over all devices if the array
address and size can be obtained. This has applications in device
power management, but the existing API for this was available only
when that feature was enabled. It also uses a signed type to hold the
device count.
Provide a new API that is generally available, but marked as internal
since normally applications should not iterate over all devices. Mark
the PM API approach deprecated.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
DEVICE_AND_API_INIT and DEVICE_DEFINE are identical except that
DEVICE_DEFINE adds a parameter providing the device pm control
function, while DEVICE_AND_API_INIT does not. This requires duplicate
implementations where if CONFIG_DEVICE_POWER_MANAGEMENT is enabled
then DEVICE_AND_API_INIT delegates to DEVICE_DEFINE with a dummy pm
control function, and if it is not enabled then DEVICE_DEFINE discards
the parameter and delegates to DEVICE_AND_API_INIT.
DEVICE_INIT is like DEVICE_AND_API_INIT but doesn't provide an API.
Clean this up by refactoring so that DEVICE_DEFINE is the core
implementation, providing with and without device power management
right next to each other where they can be compared and maintained.
Redefine DEVICE_INIT and DEVICE_AND_API_INIT delegate to
DEVICE_DEFINE.
Also remove duplicate code by extracting the variations due to
enabling device power management into macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Avoid duplication of the encoding of the public device identifier by
using the constructing macro in definitions.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This parameter points to the driver instance private data, and not to
its configuration data, which one is set via cfg_info parameter.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The device_pm_control_nop function is documented to always return zero
regardless of operation. However, when device_get_power_state() is
invoked with this control function it returns success leaving the
output parameter state unmodified, which may not be a valid device
state.
Document and implement that the nop control function returns -ENOTSUP
always.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When the device driver model got introduced, there were no concept of
SYS_INIT() which can be seen as software service. These were introduced
afterwards and reusing the device infrastructure for simplicity.
However, it meant to allocate a bit too much for something that only
required an initialization function to be called at right time.
Thus refactoring the devices structures relevantly:
- introducing struct init_entry which is a generic init end-point
- struct deviceconfig is removed and struct device owns everything now.
- SYS_INIT() generates only a struct init_entry via calling
INIT_ENTRY_DEFINE()
- DEVICE_AND_API_INIT() generates a struct device and calls
INIT_ENTRY_DEFINE()
- init objects sections are in ROM
- device objects sections are in RAM (but will end up in ROM once they
will be 'constified')
It also generate a tiny memory gain on both ROM and RAM, which is nice.
Perhaps kernel/device.c could be renamed to something more relevant.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This adds a sys init level which allows device and sys_init
to be done after SMP initialization, z_smp_init(), when all
cores are up and running.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Function to put devices in lower power mode were all implemented in the
same way. Deduplicate code there by implementing single function to
handle all cases.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Device config structure is placed in rom section but there was
no const prefix used. Lack of prefix suggested that structure
is in ram (ram_report is also fooled). Added const prefix to
explicitly inform that it goes to rom.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
The inclusion of the generated syscall files is placed outside the
extern "C" block as the generated file has its own extern "C" block.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The alignment fix on struct device definitions should be done to all
such linker list tricks. Let's abstract the declaration plus alignment
with a macro and apply it to all concerned cases.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The DEVICE_DEFINE() macro creates instances of struct device that are
gathered into a contiguous list by the linker. However, some assemblers
pad sections to the next 16-byte boundary or so by default, screwing up
the list walk in z_sys_device_do_config_level(). This is especially
true for 64-bit compilation where sizeof(struct device) isn't a
multiple of 16.
Enforcing an alignment at the linker level would solve this issue when
instances of struct device are gathered from different object files.
However it doesn't solve it when multiple instances are created within
the same object file where the first instance still has a gap with the
next instance, as the assembler does add padding upon section switch
even though the object file ends up with a single section with both
instances. In that case the linker would get rid of the trailing padding
only, leaving the inner gaps between instances in place.
The actual fix is to provide an explicit alignment attribute to the
section for every instances, using __alignof(struct device) which is
the alignment expected by the compiler for that structure.
This also means that the x86_64 workaround in the struct device
definition may go as the "edge case" it refers to is now properly
handled.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Add framework for device Idle Power Management(IPM)
for suspending devices based on device idle. This will
help in saving power even while system(CPU) is active.
The framework uses device_set_power_state() API set the
device power state accordingly based on the usage count.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
The existing device_set_power_state() API works only in synchronous
mode and this is not desirable for devices(ex: Gyro) which take
longer time (few 100 mSec) to suspend/resume.
To support async mode, a new callback argument is added to the API.
The device drivers can asynchronously suspend/resume and call the
callback function upon completion of the async request.
This commit adds the missing callback parameter to all the drivers
to make it compliant with the new API.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Modified drivers to use DEVICE_AND_API_INIT() instead of DEVICE_INIT()
This will make sure driver_api,is populated at build time and is exposed
to user space
Signed-off-by: Varun Sharma <varun.sharma@intel.com>
This patch adds a x86_64 architecture and qemu_x86_64 board to Zephyr.
Only the basic architecture support needed to run 64 bit code is
added; no drivers are added, though a low-level console exists and is
wired to printk().
The support is built on top of a "X86 underkernel" layer, which can be
built in isolation as a unit test on a Linux host.
Limitations:
+ Right now the SDK lacks an x86_64 toolchain. The build will fall
back to a host toolchain if it finds no cross compiler defined,
which is tested to work on gcc 8.2.1 right now.
+ No x87/SSE/AVX usage is allowed. This is a stronger limitation than
other architectures where the instructions work from one thread even
if the context switch code doesn't support it. We are passing
-no-sse to prevent gcc from automatically generating SSE
instructions for non-floating-point purposes, which has the side
effect of changing the ABI. Future work to handle the FPU registers
will need to be combined with an "application" ABI distinct from the
kernel one (or just to require USERSPACE).
+ Paging is enabled (it has to be in long mode), but is a 1:1 mapping
of all memory. No MMU/USERSPACE support yet.
+ We are building with -mno-red-zone for stack size reasons, but this
is a valuable optimization. Enabling it requires automatic stack
switching, which requires a TSS, which means it has to happen after
MMU support.
+ The OS runs in 64 bit mode, but for compatibility reasons is
compiled to the 32 bit "X32" ABI. So while the full 64 bit
registers and instruction set are available, C pointers are 32 bits
long and Zephyr is constrained to run in the bottom 4G of memory.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
DEVICE_AND_API_INIT() is preferred over DEVICE_INIT() since
DEVICE_INIT() does not set the API struct at build time.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A couple references to the old PRIMARY and SECONDARY levels were left in
place when everything moved to the new levels.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
User mode may need to use this API to get a handle on
devices by name, expose as a system call. We impose
a maximum name length as the system call handler needs
to make a copy of the string passed in from user mode.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
_INIT_LEVEL_P* variables are not used anywhere. These values are
duplicated in defines like _SYS_INIT_LEVEL_P*, just removing it.
MISRA-C rule 2.2
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This patch lets a C++ application use more of Zephyr by adding guards
and changeing some constructs to the C++11 equivalent.
Changes include:
- Adding guards
- Switching to static_assert
- Switching to a template for ARRAY_SIZE as g++ doesn't have the
builtin.
- Re-ordering designated initialisers to match the struct field order
as G++ only supports simple designated initialisers.
Signed-off-by: Michael Hope <mlhx@google.com>
The ifdef'ing is re-ordering things so that the documentation is
either to far away from the implementation, or in the wrong
order (implementation and then documentation).
This commit reorders the macros and documentation so that we avoid
long-spanning #ifdef's and we keep the documentation at the head of
the implementation.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types. This handles the remaining includes and kernel, plus
touching up various points that we skipped because of include
dependancies. We also convert the PRI printf formatters in the arch
code over to normal formatters.
Jira: ZEP-2051
Change-Id: Iecbb12601a3ee4ea936fd7ddea37788a645b08b0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove deprecated macros and function and structs that
were deprecated 2 versions ago 1.6 for power management
jira:ZEP-973
Change-Id: I127e482c67e09afea6a2008672661862dbf00c80
Signed-off-by: Amir Kaplan <amir.kaplan@intel.com>
Fix an issue where declaring a device in order to use DEVICE_GET macro
resulted in error: 'static declaration follows non-static declaration'.
Change-Id: I3e851e4d34e905601672e60ded50ed888c4d2a3c
Signed-off-by: Michał Kruszewski <mkru@protonmail.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Device_sync_call related APIs and typedef are actually wrappers
for kernel semaphores. These APIs and typedef will be
deprecated. Let's add deprecated attribute to give deprecation
warning.
Jira: ZEP-1411
Change-Id: Ia07557cc81bd9ee8e41f2e17be4607c4bd6d23bd
Signed-off-by: baohong Liu <baohong.liu@intel.com>
PRIMARY, SECONDARY, NANOKERNEL, MICROKERNEL init levels are now
deprecated.
New init levels introduced: PRE_KERNEL_1, PRE_KERNEL_2, POST_KERNEL
to replace them.
Most existing code has instances of PRIMARY replaced with PRE_KERNEL_1,
SECONDARY with POST_KERNEL as SECONDARY has had a longstanding bug
where the documentation specified SECONDARY ran before the kernel started
up, but actually ran afterwards.
Change-Id: I771bc634e9caf7f17dbf214a270bc9967eed7d32
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Michael Hope
