This contain the run of the self test for the ciphers, crypto
algorithms and utilities of mbedTLS.
Jira: ZEP-327
Jira: ZEP-340
Jira: ZEP-495
Origin: https://tls.mbed.org/download/start/mbedtls-2.3.0-apache.tgz
Change-Id: Ic1bb30b7ed691f17421510cd914ec5096e4e70ea
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
We have already done this on x86 and ARM. The policy is as follows:
* IRQ priority levels starting at 0 all have the same semantics and
do not have special properties. The priority level is either ignored
on arches which do not support programmable priority levels, or lower
priority levels take precedence over higher ones.
* Special-case priorty levels are specified via flags, in which case
the supplied priority level is ignored.
Issue: ZEP-60
Change-Id: Ic603f49299ee1426fb9350ca29d0b8ef96a1d53a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This introduces the default language to use for building, deploying
and evaluating testcases on real hardware in the automation framework.
To be able to filter testcases out based on .config values, we split
the build process into generating the configuration file, filtering
and then the actual building.
The configuration step is done first, to be able to skip as soon
as possible.
This file is in the top level as the test runner will look for
defaults in parent directories.
Note that the default's entry in tests/.tcdefaults takes advantage of
the fact that all:
- the test cases under tests/ print standarized strings for success
or failure.
- the tc_util.h kernel header will print the passed runid if specified
when finalizing the testcase. We will make sure it is found to deem
the TC succesful, ensuring that the right image is flashed and
verified.
Change-Id: If40b226aef9583f7ce4064405d9334de379f2b00
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This adds device address to the controller_info data. This address
may be used then by PTS for establishing connection etc.
Change-Id: Ic2319c452d94ac79376659ba37b4c9d812ccf9ae
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
If CONFIG_BLUETOOTH_PRIVACY is set in Kconfig, current settings
shall indicate it's usage.
Change-Id: I0645aedf1b774617c9d97cec0070908aef919ca7
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
Based on BTP specification following GAP_SETTINGS_* flags were added:
GAP_SETTINGS_CONTROLLER_CONFIG,
GAP_SETTINGS_STATIC_ADDRESS
Change-Id: Ic87d13772c0ef9c9bc8bba331c8bc9f3ffc93f87
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
When tester application has been initialized, send this event
to indicate that Upper Tester can send first BTP command.
Change-Id: Id3f4dd246c4e67982057f9518b4b0036e79a6a01
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
Before sending any command, the tester shall wait for this event
indicating that IUT is ready to accept first BTP command.
This is needed, because some devices need more time to initialize
their stacks, so that the first BTP command can be lost.
Change-Id: I92d1c6ea8be905734037eb29f7f270a70ab1583e
Signed-off-by: Mariusz Skamra <mariusz.skamra@gmail.com>
Depending on advertising options this can be non-connectable address.
NFC pairing application document also allows broadcaster/observer
roles.
Change-Id: I9b104ac8fb9752a083a7a31fc20598c66f23f608
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Follow up to TSC decission for further discussion in the networking
WIG.
Change-Id: I148b484dfe308661573e47ed3e60cceed673bddf
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Daily build failing due to this test case timing out
execution after 3 hours. Locally this test takes about
a minute, the issues with CI are being looked into.
Change-Id: I27e40846dde25fc65281b4aea61d10b403c6512d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This allows to query LE and BR/EDR OOB data.
Change-Id: I8bc281a9549092c1c4b40c346580abb5fd51d02d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This lets the callback take advantage of the powerful net_buf API for
parsing the advertising data content.
Change-Id: Id65e6e83efd60c0f36c47bc5446a2e8ec2833d7c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes bt_gatt_write consistent with the rest of the API where the
parameters are passed back to its callback.
Change-Id: Ie94208aa661d3620d0cbc5be4a4fb5b3c3ef061c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This can be used to test if receiving and sending simultaneously is
working properly with tools such as BlueZ's l2test.
Change-Id: Ic6bcd00a4e1448bebd3ae74bcc58986872332bbe
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The 16550 will now be the default console device.
Change-Id: I92a6b49984b055e7d5f5c97e5192150be0d5c5c7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Having two parallel implementations is a maintenance issue, especially
when some strategically placed #ifdefs will suffice.
We prefer the ASM versions for SYS V, as we need complete control of
the emitted assembly for interrupt handling and context switching.
The SYS V code is far more mature. IAMCU C code has known issues with
-fomit-frame-pointer.
The only difference between the two calling conventions is that the
first three function arguments are provided in eax, edx, ecx instead
of on the stack.
Issue: ZEP-49
Change-Id: I9245e4b0ffbeb6d890a4f08bc8a3a49faa6d8e7b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This adds reading of included service attribute 128bit UUID.
The limitation of this solution is that if several attr handle-range
pairs will be received, this will read first attribute UUID and then
start discovery from the the succeeding handle.
ZEP-373
Discovery related test results:
2/76 GATT TC_GAD_CL_BV_02_C PASS
3/76 GATT TC_GAD_CL_BV_03_C PASS
4/76 GATT TC_GAD_CL_BV_04_C PASS
5/76 GATT TC_GAD_CL_BV_05_C PASS
6/76 GATT TC_GAD_CL_BV_06_C PASS
Change-Id: I27185b3a3ae96c9c03b0f356492df18ba83b183a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Now uses net_nbuf_ll() to point to link layer header.
Also the ARP req test passes properly.
Change-Id: If649ff19a064490bff33d03b4ce70ef11bfa7cd5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of using hard coded net_if, get the default network
interface using net_if_get_default() function.
Change-Id: I6248555ce57ae5196adea7baa9db325660a71255
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These two boards don't have enough RAM to effectively run this
test case without making the stacks so small they don't work
on other platforms. ARM is sill covered by other boards.
Change-Id: Ibf20eefaf29f989cbb6da6cd3a8eeed2faa1950b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Right now there are tests for IP packet checksum calculation.
Change-Id: I1e9e72d01d4690728269c4484f8628350cf95729
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These tests will check that caller is able to set IPv4 address
to a network interface and check if an address is one of the
assigned to a network interface.
Change-Id: I8aa748c40fbc02eef50ccf76d10a0057ef29021b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tests have issues right now so these will be activated later.
Change-Id: Ib5549f9ed5600a20b2cfddbddcde8e7f7b297eef
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User should use the net_nbuf API that is supporting a concept
of RX, TX and DATA buffers, instead of using directly the net_buf
low level API.
Change-Id: I3b8f5f13cd37d42d2322a58b35573e117d520c54
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
More realistic IPv6 packet creation tests created.
One test creates one big IPv6 packet and manipulates that.
Second test creates a list of IPv6 header + data fragments
and sets some user data in those fragment buffers.
Change-Id: Ic8309ff115e1d735e98c30b3c8292b0d6ffc5f42
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add tests for checking that the net_buf fragmentation works ok.
Change-Id: I778f79bae971314b6f19c1bf00ed42e1c2128e99
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allan fixed the underlying issue, re-enable.
This reverts commit 19fa82ab91.
Change-Id: I6e517f76a6650a3e9ba5a09118187e6c965a147a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The test test_thread_monitor fails when a platform enables
the IPC console.
This commit fixes the test to count the IPC console fiber
if it is enabled in the project or the platform.
Change-Id: I9faf9d120b35d9211e558be8f5788885f30c3081
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
We now allow use of -mgpopt=global and -mgpopt=data. The 'global'
option is now the default instead of compiler-default local, expanding
global pointer usage to all small data in the system.
For systems where all RAM is less than 64K, the 'data' option may be
appropriate.
Some fixes had to be made to the system in order to get around some
issues:
* prep_c.c no longer uses fake linker variables to figure out the size
of data or BSS, as these gave the linker fits as it tried to compute
relative addresses to them.
* _k_task_ptr_idle is create by sysgen and placed in a special section.
Any small data in a special section needs to be declared extern
with __attribute__((section)) else the compiler will assume it's in
.sdata.
* same situation with extern references to k_pipe_t (fixed pipe_priv
test)
For legacy applications being ported to Nios II which do things that
freak out global pointer calculation, it can be disabled entirely.
Change-Id: I5eb86ee8aefb8e2fac49c5cdd104ee19cea23f6f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Update the FP sharing test project for use with the Cortex-M4.
Change-Id: If04a191b26291058bd7002ce8a0939eda8a5eb48
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Clean up test code in preparation for adding Cortex-M4 support.
Change-Id: I64a32e8aa2808b4e0348601e2fc0f7f39cdb413c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Buffers pool has to be increased for all configurations.
Change-Id: Id24caced5043c1672ca5f753d1e86d9a72c728ea
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
TP/GAW/SR/BV-10-C test case requires two long values to perform
nested prepare write operation. Using one ATT Execute Write command
this two values are going to be written simultaneously.
Change-Id: I2950409ed8f1d121dcc706b432cdf071b9af00c0
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Tagged some tests/kernel testcases with 'bat_commit'. Only test that
work on actual hardware are tagged, while tests with known issues
were left not tagged, test meant for emulator or build only were
also not tagged.
Change-Id: Icede6bc76788aba60d8f1fdcf624e95a7d3116a2
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
No compiler support for -fstack-protector on this arch with the
current toolchain.
Change-Id: Ifa793599b6760c318f16748f9e71c31e0d4edbe7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Tickless idle will not be enabled on Nios II due to the
lack of a powersaving instruction.
Change-Id: Ib3c23d803d6335aeb791983e31ad7da2d0deb118
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This driver does not yet support interrupt-driven console.
Revert when ZEP-280 is implemented.
Change-Id: Ib430c39138194ab441c95a1b1856c3661102a625
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
$srctree for the application might not be set to be $ZEPHYR_BASE, use
$ZEPHYR_BASE instead to be more explicit in the build.
Change-Id: Iefa5ff59f246b584949329044f7a6531adc6ed62
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
printk() is too simplistic and does not handle byte precision on formats
like %02x etc... printf does, so letting the possibility to use it when
relevant. This might be useful when dumping out some network packets,
byte by byte where a precision of 1 byte (thus 2 0's) is necessary.
It's better to have this output:
41 d8 ...
instead of:
00000041 000000d8 ...
Change-Id: Idc15bbae67830f41388373e2ca1947bb274fb550
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
