It mimics how event could be thrown through a dedicated thrower (a
fiber). The amount and event it can throw is gived through parameters.
Change-Id: I484bc72bdb730a77ce976b0b2998411d9918b7fc
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Basic unit tests for Router Advertisement message handler.
Change-Id: Ia99cd160632972a12e2099a3ff6e41e6ea48ff9b
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The buf parameter cannot point to a data fragment in
net_nbuf_write() because we need to use user data inside
that function and the fragments do not have that information.
Change-Id: I45b9c23869df08a0852bd99c0b453210ad2300b5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tests for net_nbuf_read, net_nbuf_write and net_nbuf_skip API's.
Change-Id: I77f702dda8c9df7892120f47ff03a6b256191d31
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
One second timeout seems to be too short as some test runs
fail when run in Jenkins.
Change-Id: Ifb01929148415961712468e3cc85387aac5eb2bb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It's an empty beacon frame, juste to validate the Beacon frame parsing
logic.
Change-Id: I90916eb87187c9eae9b2267f34dc93bee554d4b5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If ethernet address is broadcast or multicast, l2 layer does not
send any ARP messages. Handle this scenario in ethernet tests.
Change-Id: I8e11832803e1539887152447090d1286c7fa3eb0
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If the connection establishment has an error, the accept
callback needs to be able to return that error to user space
so that the application can know about it.
This is especially important in TCP where application needs
to start to listen again if reset is sent during connection
establishment.
Change-Id: I55f36e4f101c7237c1288f09baf6e602b33da2b3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some of the DEBUG options for the new IP stack still used
the CONFIG_NETWORK_IP_STACK_DEBUG_ prefix.
Change-Id: I8f039ac5e303a7c571a870403ce17d758db540d5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- new stack options are renamed and placed in their respective menus
- new stack Kconfig gets normalized (tabs vs spaces, etc...)
Change-Id: Ia68f6589fed464bbdd76dc0812775684b2f94a58
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add socklen_t addrlen parameter to net_context_bind(),
net_context_sendto() and accept callback.
Currently the address length option is not really mandatory
as we can figure out the length from the address family.
But if we are going to support other protocol address families
it might be needed.
Change-Id: I59206465c3259050c469c5b2150221646a9a08d7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Because of printk fixes in master, some of the networking
unit tests will fail in next merge.
Change-Id: I3e28aae72c0c10b402b78c0f406ecb3513b967a7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Earlier all unit tests are with IPv6 and UDP as next header.
Modified tests with IPv6 only, IPv6 + UDP and IPv6 + IPHC next
headers.
Change-Id: Ie02cecb37e07ceae8a06a0653e2ccdfe0db91239
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
We are not just checking the test build but this time
the tests are also run.
Change-Id: I7b0b24c51dfc2dc58f290cca7a593be431b8077f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For consistency as well as for helping when grepping etc.
Change-Id: Ib5e6b3369e510dd2b996f735d801c2b80291ad7f
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is only meant for the new IP stack.
Change-Id: I643b0556f87423f09555274749db93397ef66c59
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Reassembly IEEE 802.15.4 fragments as per it's datagram size
and datagram tag. Uncompress IP header fragment as soon as it
arrives. Size matches only after uncompression of IP header with
total length.
Support added for multiple IP packet reception. Default is one full
IP packet at a time. Cache size can be modified via Kconfig option
(NET_L2_IEEE802154_FRAGMENT_REASS_CACHE_SIZE).
Note: If you increase the size by 1 means, you should have N number
of data buffers available at max.
e.g. One full IP packet (1280 MTU) needs 15~16 data fragments means,
multiply size by same number of fragments. It requires more memory.
Offset based reassembly yet to be done (fragments can come in any order
[e.g. mesh]). Now assuming that fragments are in right order.
Change-Id: I17baee30a1087eb9ec6dc25f03ed64bbe0df2917
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add support for IPv6 header dispatch (without IPv6 compression
and uncompression). Only IPv6 dispatch header will be added at the
beginning of the buffer.
Change-Id: I7400a4dd115ac3b4b3d9deecd3cdb9ea292573fb
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
6lowpan compression and uncompression done on original
input buffer. So no need to return paramter as net_buf *.
If the compression or uncompression fails, unref the buffer
as it cannot be used further.
Change-Id: I64f496e22b2008a91a358fff65de1b87659cd9eb
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
UDP length was wrongly set and test count was hardcoded.
Change-Id: Iade959e1b8c3580b43aa2a9ff1fc10eb5a462f2f
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
- Parsing a proper ACK reply
- Generating a ACK reply from a data packet requesting it, and comparing
it to a proper one.
Change-Id: I1717fedc899eafa0aa849e1e253f02cd3dc3d4fc
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
First test is a unit test for frame parsing
Change-Id: I080d64a71fe4b6ff00e071a0cdee97ab9cd922d5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Allocate the right amount of space for L2's context.
Change-Id: Ia2f4f4162334e9e9c26dc95230abdfde5986e052
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is related to changes in commit 7dcbbc39e7
("build: move from srctree to ZEPHYR_BASE for app include paths")
Change-Id: Ie902ed66bb74188ed54aae44e2f4289f954ec351
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When a UDP packet has been received and if a watcher match
is found, then a callback is called. It is useful to have
a pointer to net_conn when calling the callback.
Change-Id: Ifa97b37c22b1fc9cac7eadfba23aa68dfd473fda
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the net_conn needs port information, use struct sockaddr
internally as it has the port numbers built in.
Change-Id: Idb1c87afa956dfe55dc8d533d867fa7845545b12
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to print debug prints if debugging is not activated.
Change-Id: I42a6453b4f3e11106119561b580ebea41e56452d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When checking the IP address from network interface, return
also the used network interface.
Change-Id: If7b8385193da4cb1b469f697e219cfae3b6477dd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
IPv4/6 functions follows this scheme: net_if_ipv<4/6>_<name>.
Applying that to net_if_set_gw/net_if_set_netmask which are IPv4
functions.
Change-Id: I2dcbb16ce81cfdffbfbb5cae24ad76ddf2b9919a
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Using macros does not let the compiler verifying about the type we are
providing, which usually give an error easier to understand.
Also, this will let the compiler deciding how to actually optimize
(inline or not) the code.
Change-Id: Iba49590b620ef0a1bd0ed5621453524fcfea747c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Disable IPv6 DAD and ND for IP address test as there is
no need to do neighbor discovery in the test. We also
would like to see network interface debugging and use
dummy L2 driver instead of ethernet one.
Change-Id: Ia9f218c8d4c13afa1482302691d2ef72af4a7b13
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The driver_api pointer was set to NULL and send() pointer
was missing which caused a crash in TX fiber.
Change-Id: I7204c975691476dd9ab2c61bfd11b7664343e47c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
ARP is IPv4 only so no need to have IPv6 functionality.
Change-Id: Ie70242f5763ba4945c311898643414851f7e8660
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These tests will verify that we can successfully insert
some space in front of the net_buf fragment chain.
Change-Id: Idf52ed56c52d66268783fb4fecd44b70fc852734
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The driver_api pointer was set to NULL which will cause
a crash in TX fiber.
Change-Id: If1c9a1e44904970f3a0019741eaaad4bf62d2c73
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The tests will make sure net_nbuf_copy() works as expected.
Change-Id: I48dc3b794c70ec4d6436feb76508952c88bbf09b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
