For posix layer implementation of message queue, we need to fetch
basic attributes of message queue. Currently this routine is not
present in Zephyr. So adding this routing into message queue.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
When dns_get_addr_info() returns an error it does not call the
resolve callback, and thus the semaphore will not be given.
This fix will avoid a deadlock situation for various errors.
Added some small tests for getaddrinfo().
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
There is a typo in the area description of the testcase (kerne.XYZ vs
kernel.XYZ).
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Enable the loopback driver and set up network testing so that it
will not require a SLIP driver. Move values from the extra test
config so that they are always enabled.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Adapt the MyNewt non-volatile configuration system to become a settings
system in Zephyr.
The original code was modifed in the following ways:
* Renamed from config to settings
* Use the zephyr FCB, FS API, and base64 subsystems
* lltoa like function was added to sources as it was required but not
included in Zephyr itself.
* The original code was modified to use Zephyr's slist.h as single
linked list implementation.
* Reworked code which was using strtok_r, added function
for decoding a string to a s64_t value.
* Thank to the above the settings subsys doesn't require newlibc anymore.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This demostrates how to classify the network traffic when sending
data. The application will create similar functionality as
echo-client so user can use echo-server running in remote host to
test this sample application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Test that we can set the priority of the network packet and
that high priority packets are sent before low priority ones.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of always allocating both IPv6 and IPv4 address information
to every network interface, allow more fine grained address
configuration. So it is possible to have IPv6 or IPv4 only network
interfaces.
This commit introduces two new config options:
CONFIG_NET_IF_MAX_IPV4_COUNT and CONFIG_NET_IF_MAX_IPV6_COUNT
which tell how many IP address information structs are allocated
statically. At runtime when network interface is setup, it is then
possible to attach this IP address info struct to a specific
network interface. This can save considerable amount of memory
as the IP address information struct can be quite large (depends
on how many IP addresses user configures in the system).
Note that the value of CONFIG_NET_IF_MAX_IPV4_COUNT and
CONFIG_NET_IF_MAX_IPV6_COUNT should reflect the estimated number of
network interfaces in the system. So if if CONFIG_NET_IF_MAX_IPV6_COUNT
is set to 1 and there are two network interfaces that need IPv6
addresses, then the system will not be able to setup IPv6 addresses to
the second network interface in this case. This scenario might be
just fine if the second network interface is IPv4 only. The net_if.c
will print a warning during startup if mismatch about the counts and
the actual number of network interface is detected.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move IP address settings from net_if to separate structs.
This is needed for VLAN support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove arduino_101 from platform whitelist in testcase.yaml as all the
test cases are not meant to run on Arduino_101.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
As per the Apache v2 License, state changes made to the original code in
the modified version of the files.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The following test cases have been added for semaphore.
1. Test simple semaphore give/take from an isr.
2. Test simple semaphore give/take from a task.
3. Test semaphore take with no wait.
4. Test semaphore take with no wait and fails.
5. Test semaphore take with timeout and fails.
6. Test semaphore take with timeout.
7. Test semaphore take with timeout as forever
8. Test semaphore take with timeout from an isr.
9. Test semaphore take on multiple threads.
10. Test semaphore give/take from an isr.
11. Test semaphore multiple threads wait on a semaphore.
12. Test semaphore measure timeouts.
13. Test semaphore measure timeout when give is from another thread.
14. Test semaphore multiple sem take and timeouts.
15. Test semaphore multiple sem take with diff timeout & semaphore.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This test validates random number generator APIs that
is not related to kernel and should not be part of
kernel tests.
Signed-off-by: Praful Swarnakar <praful.swarnakar@intel.com>
Test that if the checksum offloading is enabled, then we do not
calculate the checksum. Also the normal case, where offloading is
disabled and we need to calculate the checksum, is tested.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Create infrastructure that allows ethernet device driver to tell
if it supports network packet checksum offloading. This applies only
to IPv4, UDP or TCP checksums. The driver can enable/disable checksum
offloading separately for Tx and Rx network packets.
If the device (ethernet in this case) can calculate the network
packet checksum for IPv4, UDP or TCP, then do not calculate the
corresponding checksum by the stack itself.
Fixes#2987
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The test validates the behavior of calling k_thread_start()
of thread which is already started. The thread has to start
execution only when its state is _THREAD_PRESTART.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
Added a test for having UTF-8 characters in Kconfig values. This
ensures that issue
https://github.com/zephyrproject-rtos/zephyr/issues/6649 does not
affect any supported platforms and that it does not re-appear in the
future.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Previous implementation was buggy, destroying
resources with pending thread and race conditions.
New version tests basic functionality with 2
threads and basic synchronization.
Signed-off-by: Juan Manuel Torres Palma <j.m.torrespalma@gmail.com>
Add testcases for following scenario
Test to check alert_recv(timeout) against the following cases
1. The current task times out while waiting for the event.
2. There is already an event waiting (signalled from a task).
3. The current task must wait on the event until it is signalled
from either another task or an ISR
Test to check alert_recv(K_FOREVER) against the following cases:
1. There is already an event waiting (signalled from a task and ISR).
2. The current task must wait on the event until it is signalled
from either another task or an ISR
Test to checks that the event handler is set up properly when
alert_event_handler_set() is called. It shows that event handlers
are tied to the specified event and that the return value from the
handler affects whether the event wakes a task waiting upon that
event
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
With upcoming ICs that are not in the nRF5x family, rename the flash
driver and all its dependencies from nrf5 to nrf.
Should also fix the issue introduced by f49150cab6 which broke the
assignment of the flash device due to a partial rename.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add k_fifo kernel object timeout scenario tests like basic
k_fifo API tests with timeouts and tests which involve other
threads to get/put items from/into k_fifo with timeouts.
This test is inspired from test_stack legacy test from
Zephyr v1.7.0 release.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add k_fifo kernel object usage scenario tests between thread
to thread and thread to ISR.
This test is inspired from test_fifo legacy test from
Zephyr v1.7.0 release.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Network packet cannot be NULL so no need to check its value.
Coverity-CID: 183063
Fixes#6669
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to verify that the configuration is proper if we are
compiling the driver for unit test and not going to ever run
the test.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support for MSG_PEEK flag in recv and recvfrom.
This flag is needed when using non-zephyr embedded applications with
Zephyr's socket API.
Signed-off-by: Stig Bjørlykke <stig.bjorlykke@nordicsemi.no>
Upcoming Nordic ICs that share many of the peripherals and architecture
with the currently supported nRF5x ones are no longer part of the nRF5
family. In order to accomodate that, rename the SoC family from nrf5 to
nrf, so that it can contain all of the members of the wider Nordic
family.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Previously qemu_x86 was the only device to run this test in
userspace. With this patch, the pipe testcases can now
run on any device which has userspace enabed.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
The following are the test cases added for pipe.
1. Test pipe APIs on single data element.
2. Test pipe APIs on multiple data elements.
3. Test pipe APIs with forever wait.
4. Test pipe APIs with timeout.
5. Test pipe APIs on an empty pipe.
6. Test pipe get API with forever timeout.
7. Test pipe get API with limited timeout.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
A new Kconfig to help test the userspace mode. Needed for devices
which have userspace capabilities but are not enabled by default.
This kconfig enables the userspace for the devices which have
CONFIG_ARCH_HAS_USERSPACE enabled.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
The test verifies the API functionality of _thread_essential_clear(),
_thread_essential_set() and _is_thread_essential()
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
This is a component of address space layout randomization that we can
implement even though we have a physical address space.
Support for upward-growing stacks omitted for now, it's not done
currently on any of our current or planned architectures.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
With recent master, this sample started to overflow ROM area of
arduino_101, which has 144K of it:
Memory region Used Size Region Size %age Used
ROM: 149420 B 144 KB 101.33%
RAM: 26228 B 52 KB 49.26%
IDT_LIST: 564 B 2 KB 27.54%
MMU_LIST: 0 GB 1 KB 0.00%
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
SRAM size is very small and so we cant fit the test-suite inside.
Hence disabling the execution on boards with very small RAM region.
Example: quark_d2000 & nucleo f030
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Added new test cases to increase the impact of the test cases.
The following are the brief description of the testcases:
1. Incorrect receiver address.
2. Incorrect transmit address.
3. Mbox_get timeout occurs when not able to retrive a msg.
4. Discard a msg by passing an invalid pool id.
5. Msg id mismatch between the receiver and transmitter.
6. Copy tx buffer to a new block in the pool.
7. Copy a big tx buffer to a block in the pool but no block
can fit it.
8. Dispose a msg as soon as it is read.
9. Free tx pool when we read the msg.
10. A Asynchronous put unblocks a waiting get.
11. A Asynchronous put sends a wrong address to a waiting get.
12. Multiple Asynchronous put populates the msg_q and mbox_get
retrives it.
13. Multiple waiting mbox_get and each put unblocks it one at a time.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Modified the testcase for comparing the successive random
numbers generated by sys_rand32_get(). Also, added new configs
for verifying different sources of random number generation.
Signed-off-by: Praful Swarnakar <praful.swarnakar@intel.com>
We don't currently build on qemu_xtensa because completion is missing.
Seems like we have some dependency issue.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
