This test is breaking CI, we need a fix first before we go and enable
tests.
This reverts commit dc39a9adcf.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a build variant of the posix tests with newlib enabled. Since the
interation of posix is greatly related to the libc we should have these
tests build with and without newlib support.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- differentiating actual "fragment" to buffer element from a net_pkt
- instead of copying data (and thus allocating buffer) let's just take
the fragment buffer and put it into result packet.
- fixing compilation issue in relevant test
It's more efficient that way, as we use already allocated fragment
buffer instead of reallocating/deallocating after each fragment
reception.
A possible optimization would be to calculate the actual size + header
difference if only the actual size is close to the target size.
It would avoid to get a dry run of the header decompression for each
fragment received. The difficulty being in finding the sweet spot when
it is relevant to calculate the header difference.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is an integral part of userspace and cannot be used
on its own. Fold into the main userspace configuration.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Test was failing on nios2 with:
../app/libapp.a(test_stack_contexts.c.obj): in function `tstack_pop':
/home/galak/git/zephyr/tests/kernel/stack/stack_api/src/test_stack_contexts.c:31:
warning: unable to reach (null) (at 0x004002f4) from the global pointer
(at 0x004082fc) because the offset (-32776) is out of the allowed range,
-32678 to 32767
Fixes#13595
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit fixes a test in kernel/mem_protect/userspace,
which was attempting to read from an address that was not
necessarily within the image memory range, causing faults
in ARM TrustZone-enabled builds.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For now we are disabling support for POSIX lib on native posix arch. We
need to cleanup and support POSIX lib cleanly for hardware targets.
Once that is working properly we can look to support the feature on
native posix arch.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move test related code and the testsuite away from tests/ and make it a
proper subsystem.
The way tests were integrate in the tree was not obvious and actual
tests were intermixed with the testsuite code.
This will allow us to have trees with the testcode and without the
samples by just remove the folders tests/ and samples, needed for
isolating actual code from test/sample code.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In order to follow the naming from Linux, change the name of
can_msg to zcan_frame, and can_msg_filter to zcan_filter.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that can_copy_*() functions work as expected.
These functions are used by SocketCAN support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
settings_line_len_calc() calculates only setting record
payload size, not record layout in flash size.
this patch remove inadequate test for this function.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added test for check whether value lenght is properly
stored for unaligned settings record size.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
For improved precision of high speed PWMs, the new
function will allow you to specify period and pulse
at the nanosecond resolution.
Signed-off-by: Nicholas Lowell <nlowell@lexmark.com>
Fix array overrun issue by limiting the array
index to the maximum possible string length.
Coverity CID: 190624
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Macros are replaced by C++ friendly versions:
- SHELL_CREATE_STATIC_SUBCMD_SET by SHELL_STATIC_SUBCMD_SET_CREATE
- SHELL_CREATE_DYNAMIC_CMD by SHELL_DYNAMIC_CMD_CREATE
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
It is planned to deprecate SHELL_CREATE_STATIC_SUBCMD_SET macro
which is replaced by SHELL_STATIC_SUBCMD_SET_CREATE.
Additionally, removed irrelevant comments about alphabetical
ordering which is no longer needed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit disables system-level power management in the device power
management test as it is not used.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Some of power states used numerical suffix while otthers not.
This commit adds proper suffix to all power state names.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
f
This commit simplifies OS <-> Application interface controlling power
management. In the previous approach application-based PM required
overriding sys_suspend() and sys_resume() functions. As these functions
actually implemented power state change, in such case application
basically had to provide own implementation of all PM-related stuff,
which was not portable and hard to maintain.
This commit changes this scheme: The sys_suspend() and sys_resume()
are now system functions while the application could either use
built-in power management policies or provide its own. All details
of power mode switching are now handled by the OS.
Also, this commit cleans up the Kconfig options related to system-level
power management grouping them under common CONFIG_SYS_PM_ prefix.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Since malloc takes a size_t, we should use 0x7fffffff as the max size
(ie what the larget unsigned int) would normall be. Newer newlib's have
a check that will fail building since 0xf0000000 exceeds the size.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This app was supposed to have userspace disabled, but it kept on being
forced on by CONFIG_TEST_USERSPACE (which in turn gets enabled by
CONFIG_TEST).
Also lower the shell stack size since stack analysis shows over 700
bytes being unused.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Change connection parameters and channel map after connection is
established. Test encrypted connection also with split stack. Tighten
pass/fail criteria.
Signed-off-by: Wolfgang Puffitsch <wopu@oticon.com>
We weren't testing whether stack overflows in user mode
were correctly reported.
A more aggressive stack overflow logic is enabled if
HW-based stack overflow detection is enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Upon hard/soft irq or exception entry/exit, handle transitions
off or onto the trampoline stack, which is the only stack that
can be used on the kernel side when the shadow page table
is active. We swap page tables when on this stack.
Adjustments to page tables are now as follows:
- Any adjustments for stack memory access now are always done
to the user page tables
- Any adjustments for memory domains are now always done to
the user page tables
- With KPTI, resetting a page now clears the present bit
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Tests were failing because:
1. `alarm_cnt` was not reset before the test.
2. one test was failing because it was expecting that setting
`top_value` for channel_alarm is too high value but in fact
it is accepted and `top_value+1` is too much.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Now that the stack uses the new API from net_pkt for pulling, no need
to keep the legacy one around.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy net_pkt_clone function has been removed, the new
function can be renamed accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that the stack uses the new API from net_pkt for copying, no need
to keep the legacy one around.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy net_pkt_clone function has been removed, the new
function can be renamed accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And remove the parameter "full" as there is no "ll reserve" distinction
anymore. The parameter was unused since the ll reserve concept removal.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
