This will be used for both 32-bit and 64-bit mode.
This header gets pulled in by x86's arch/cpu.h, so put
it in include/arch/x86/.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit adds a possibility to activate duplicates filtering
during direct loading.
JIRA: NCSDK-3017
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
This commit adds a possibility to activate duplicates filtering
during direct loading.
JIRA: NCSDK-3017
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
A few settings module variables were not initialized before used.
Normally these variable are initialized in the back-end
initialization call which couldn't be done in affected unit tests.
This path initialize these variable via assignments in test code.
fixes#19722
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
On 64-bit targets, the minimum possible mempool block size is not 8
but 16. With a max block size of 32, the mempool allocator cannot
split it into 4 sub-blocks, reducing the available memory allocations
to that original 32-byte block only.
To get the same allocation patterns and test behavior whether it is
built for a 32-bit or 64-bit architecture, let's define BLK_SIZE_MIN
and BLK_SIZE_MAX in terms of _MPOOL_MINBLK instead of literal values.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Documentation for k_pipe_block_put() says:
This routine writes the data contained in a memory block to pipe.
Once all of the data in the block has been written to the pipe,
it will free the memory block.
Therefore it is wrong to free the memory block within the test code.
When the mempool allocator is instrumented to detect double-free
instances, this case is signaled right away.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Re-run with updated script to convert integer literal delay arguments
to k_thread_create and K_THREAD_DEFINE to use the standard timeout
macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Re-run with updated script to convert integer literal delay arguments to
k_sleep to use the standard timeout macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Re-run with updated script to convert integer literal delay arguments to
k_mbox_data_block_get to use the standard timeout macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Added test suite which performs sanity check on instances with
fixed-top feature enabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added tests which verifies that:
- driver will detect when absolute alarm is set too late.
- short relative alarm is supported
- canceled alarm is not triggering user callback
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Implemented latest extensions to the counter API related to
detection of alarms being set too late and short relative alarms.
Implementation could not be realized on nrfx_rtc driver thus
driver has been reimplemented based on nrf_rtc hal.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Just housekeeping around the casting between void * arguments to
thread functions and integer types.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
And set qemu_x86_long board to build with CONFIG_SMP=y by default.
Apparently two benchmark tests - latency_measure and sys_kernel -
do not work with the SMP scheduler, so those tests are disabled.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Stops leaking very long source paths in build directories; makes them
deterministic.
Besides satisfying a CMake requirement, the new empty_file.c provide a
clue that the actual test code is not in the directory of the test case.
See https://github.com/zephyrproject-rtos/hal_nordic/pull/6 and
https://gitlab.kitware.com/cmake/cmake/issues/19475 for more details.
- Test with a simple:
sanitycheck -T $ZEPHYR_BASE/tests/subsys/settings/functional/
- Before:
CMakeFiles
├── app.dir
│ ├── HOME
│ │ └── JOHN
│ │ └── zephyrproject
│ │ └── zephyr
│ │ └── tests
│ │ └── subsys
│ │ └── settings
│ │ └── functional
│ │ └── src
│ │ └── settings_basic_test.c.obj
- After:
func_test_bindir/
├── CMakeFiles
│ └── settings_func_test.dir
│ └── settings_basic_test.c.obj
│
├── libsettings_func_test.a
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This was a very early test and got bitrotten inside a esp32-only
whitelist. Make it run generically.
SMP must be forced off by the test (it's commonly a platform default).
Add a build-time failure when the configuration is single-CPU, for
clarity.
Filter the test likewise so it runs on all supported systems.
Also, the key argument to the CPU startup function is vestigial and
the test was being too strict by requiring it to be non-zero.
Finally, the qemu command line needs to predicate the "-smp" argument
on CONFIG_MP_NUM_CPUS and not just CONFIG_SMP so we have an extra CPU
to test against.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This test was written very early. Spinlocks are required for SMP
implementation. They couldn't be tested in terms of it, so the test
used the low level MP API instead. But of course that breaks if SMP
is actually working and the CPU is already started.
No need for that now. Just spawn a thread like any other, and filter
the test to run only on SMP systems.
Fixes#19319
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Executing the ARM thread swap test with NO_OPTIMIZATIONS
option set, leads to Idle thread stack overflow in certain
platforms. We increase the size of the Idle thread stack to
address this.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This patch is a preparatory step in enabling the MMU in
long mode; no steps are taken to implement long mode support.
We introduce struct x86_page_tables, which represents the
top-level data structure for page tables:
- For 32-bit, this will contain a four-entry page directory
pointer table (PDPT)
- For 64-bit, this will (eventually) contain a page map level 4
table (PML4)
In either case, this pointer value is what gets programmed into
CR3 to activate a set of page tables. There are extra bits in
CR3 to set for long mode, we'll get around to that later.
This abstraction will allow us to use the same APIs that work
with page tables in either mode, rather than hard-coding that
the top level data structure is a PDPT.
z_x86_mmu_validate() has been re-written to make it easier to
add another level of paging for long mode, to support 2MB
PDPT entries, and correctly validate regions which span PDPTE
entries.
Some MMU-related APIs moved out of 32-bit x86's arch.h into
mmustructs.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Test for bbc_microbit was failing due to RAM usage. Reduced main
stack size and turned off temperature algorithm to fit.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added test suite for clock control driver. It covers latest API update
for starting clock asynchronously and getting status.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit adds new k_work_poll interface. It allows to
submit given work to a workqueue automatically when one of the
watched pollable objects changes its state.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The test creates two network interfaces, but does not set MAC
address of one of them correctly (MAC address is all zeros).
This is not good and the issue fixed in commit 9468cb6eb1
could have been revealed earlier.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Update the .yaml file of the test suite, so it enables
building and running the test for Cortex-M Baseline
architecture. Update the test README accordingly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Some fixes to the ARM Thread Swap test:
- replace a mempcy with memset (this did not have an
effect, as we basically wanted to randomize the
callee-saved registers)
- fix two inline comments so they correspond to the
z_assert_ expressions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We rework the arm_thread_swap test, so it can build
and run for Cortex-M Basline architecture (Cortex-M0,
Cortex-M0+, and Cortex-M23). In most cases, this rework
involved re-implementing the code blocks for storing
and loading the callee-saved registers to and from
memory. In addition, we skip the verification of
BASEPRI, and replace it with verifying PRIMASK.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This patch re-namespaces global variables and functions
that are used only within the arch/arm/ code to be
prefixed with z_arm_.
Some instances of CamelCase have been corrected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Use the int_literal_to_timeout Coccinelle script to convert literal
integer arguments for kernel API timeout parameters to the standard
timeout value representations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This test requires more than 32 static priorities by default, and
doesn't run with the multiq scheduler without a special configuration.
That used to be specified per-platform, but got moved to a separate
test case a while back.
This broke non-default platforms like qemu_cortex_m3 which use
SCHED_MULTIQ as their default backend. Put a filter in place instead
of going back to per-platform changes.
Fixes#19437
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Remove duplicate "tdata.timestamp" update in duration_expire; this
value is already updated by k_uptime_delta.
Besides simply removing duplicate value update, this commit also
addresses the intermittent assertion failure that is caused by
updating "tdata.timestamp" at a later time than the actual execution
of the k_uptime_delta function.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
We filter out the following kernel tests
- tickless_concept
- timer_api
from the set of tests running on QEMU Cortex-M0 platform,
as the tests consistently fail on QEMU. In addition, we
add a workaround for kernel/interrupt test, so it can
successfully execute on QEMU Cortex-M0.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Replaced net_bytes_from_str in hostname_get test by a new function that
converts the unique part of the hostname in a byte array.
net_bytes_from_str can not be used as it assumes that the string input
is of the format "xx:xx:xx:xx:xx:xx" where as the unique part of the
hostname is a MAC address string without colons. If net_bytes_from_str
is used this could result in buffer overrun on the input string.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Application board.overlay files tend to be paired with
boards/board.conf files that extend the functionality of a board.
Move the overlay files to the same location as the config files that
they work with.
A few overlay files that are paired with a prj_board.conf file in the
application root directory are left in place.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Increased TX/RX buffer size by one in pipe test to prevent buffer
overrun.
Some test will transfer one byte more then the number of bytes
supported by the pipe, in case the buffer size is the same as the
size of the pipe this will result in a buffer overrun.
Tools such as address sanitizer would detect this overrun and fail the
test.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Move tinycrypt related header into test and make those tests only build
on native_posix. The tests are unit tests, ie. testing tinycrypt
functionality only without any dependency on the underlying system.
Long term we should move those to be true unit tests and create
functional and integration tests that use tinycrypt in the context of
Zephyr and for real use-cases.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Disable the CONFIG_TEST_LOGGING_DEFAULTS Kconfig option which forces
immedate logging, since that is not compatible with Bluetooth and its
tests.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
