Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add timer label for this test suite, so it is included
in sanity check runs with -t timer.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
After the Qemu Cortex-M0 timer driver rework, we may
enable the test-suite that had been (always) excluded
from running on this platform.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The converted target value for remaining ticks was increased by one to
match original code, which used a one-sided test. The current test is
two-sided, so that increment is already present in the allowed 1 tick
error for boards with no slew, and incorporating it into the absolute
error can cause the test to fail.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When millisecond/tick conversion is not exact tick delta's are
dependent on the initial tick value. In those cases exact comparisons
need to also allow an adjacent value.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When HFCLK has a slew making it faster than LFCLK the busy wait can
expire before the timer fires.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Reduce the duration of the timer test so that it will fire before the
busywait elapses even in the worst case of slew between the tick and
busy-wait clocks.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This test sets a timer using one clock, waits using a second clock,
then sees whether the remaining time is the expected value. When the
two clocks are skewed the comparison requires a threshold. Provide a
means to estimate the maximum expected error.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Adjusting the input value to allow round to nearest can cause an
overflow which invalidates the expectation that the 32-bit result is
the low 32 bits of the 64-bit result. If the adjustment overflows do
the full-precision conversion and truncate in the caller.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
When the timer frequency is not a multiple of 1000 converting between
ticks and milliseconds introduces error. Avoid propagating the error
by converting divided values rather than dividing converted values.
Also compensate for observed rate differences between the busywait
clock and the timeout clock.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
A fast timer clock can advance before or after the remaining time
until an event is captured. Verify the expected relationship between
current and remaining time holds for at least one captured current
time.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When one millisecond is not an integral number of ticks measuring
durations between tick events will sometimes be less than expected to
correct for error that was accumulated between other events. Allow
for that in the duration and period comparisons.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit fixes the assertion in test_timer_remaining() that checks
whether the remaining ticks on a timer is less than or equal to half of
the timer duration after a busy wait of that time. If the timer
duration corresponds to an odd number of ticks, 1 should be added to
the upper bound given k_timer_remaining_ticks() returns
<ticks til next deadline> - <elapsed ticks>,
and <elapsed ticks> is truncated to closest integer tick count.
For example, if
dur_ticks = 3277
<ticks til next deadline> = 3277
<elapsed ticks> = 1638.5 rounded to 1638
rem_ticks would be 1639, which is 1 greater than dur_ticks/2.
Fixes#25331
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The test of the absolute timeout feature was a simple whitebox test
that inspected the generated ticks field of different constructors for
identity. But it wasn't simple enough, because it was doing a
ticks->ms->ticks conversion (at compile time, sigh) on the input data,
which is obviously lossy on platforms where ticks are shorter than
milliseconds by non-integral factors.
Fix to do the conversion in just one direction.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This test sets a timer, busy waits for half the duration, and then
checks the remaining time is correct. And it correctly does all its
math in tick precision and aligns to a timer interrupt to eliminate
aliasing due to the tick stride.
But it's waiting using k_busy_wait(), not a timer: "half the duration"
in MICROSECONDS (for k_busy_wait()) is not necessarily representable
as an integer number of TICKS on all platforms. Because k_busy_wait()
always rounds up, we need one extra tick of buffer on those platforms.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add support for "absolute" timeouts, which are expressed relative to
system uptime instead of deltas from current time. These allow for
more race-resistant code to be written by allowing application code to
do a single timeout computation, once, and then reuse the timeout
value even if the thread wakes up and needs to suspend again later.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Kernel timeouts have always been a 32 bit integer despite the
existence of generation macros, and existing code has been
inconsistent about using them. Upcoming commits are going to make the
timeout arguments opaque, so fix things up to be rigorously correct.
Changes include:
+ Adding a K_TIMEOUT_EQ() macro for code that needs to compare timeout
values for equality (e.g. with K_FOREVER or K_NO_WAIT).
+ Adding a k_msleep() synonym for k_sleep() which can continue to take
integral arguments as k_sleep() moves away to timeout arguments.
+ Pervasively using the K_MSEC(), K_SECONDS(), et. al. macros to
generate timeout arguments.
+ Removing the usage of K_NO_WAIT as the final argument to
K_THREAD_DEFINE(). This is just a count of milliseconds and we need
to use a zero.
This patch include no logic changes and should not affect generated
code at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
'build_only' directive may not be justified here and
prevent to see issue when running the test.
Similarly to non tickless version exclude qemu_x86_coverage
and qemu_cortex_m0 platforms.
It was actually tested failed on qemu_cortex_m0, no error
reported on qemu_x86_coverage, but removed to be safe on that side
as well.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
timer_api requires TEST_USERSPACE activation which is missing
in tickless configuration of the test.
Enable flag in prj_tickless.cnf
Fixes#20904
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The new conversion API has a ton of generated utilities. Test it via
enumerating each one of them and throwing a selection of both
hand-picked and random numbers at it. Works by using slightly
different math to compute the expected result and assuming that we
don't have symmetric bugs in both.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Use the int_literal_to_timeout Coccinelle script to convert literal
integer arguments for kernel API timeout parameters to the standard
timeout value representations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Remove duplicate "tdata.timestamp" update in duration_expire; this
value is already updated by k_uptime_delta.
Besides simply removing duplicate value update, this commit also
addresses the intermittent assertion failure that is caused by
updating "tdata.timestamp" at a later time than the actual execution
of the k_uptime_delta function.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
We filter out the following kernel tests
- tickless_concept
- timer_api
from the set of tests running on QEMU Cortex-M0 platform,
as the tests consistently fail on QEMU. In addition, we
add a workaround for kernel/interrupt test, so it can
successfully execute on QEMU Cortex-M0.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Disabling SMP mode for certain tests was a one-release thing, done to
avoid having to triage every test independently (MANY are not
SMP-safe), and with the knowledge that it was probably hiding bugs in
the kernel.
Turn it on pervasively. Tests are treated with a combination of
flagging specific cases as "1cpu" where we have short-running tests
that can be independently run in an otherwise SMP environment, and via
setting CONFIG_MP_NUM_CPUS=1 where that's not possible (which still
runs the full SMP kernel config, but with only one CPU available).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The test_timer_periodicity waits for first timer expiration
in order to extract timer firing time. The wait is performed
using k_timer_status_sync() API call, which blocks thread
until timer expiration. However if the timer expired before
call the this function, it will return immediately, triggering
test failure.
This commit adds the second call to the k_timer_status_sync()
to ensure that the following part of the test will be executed
as soon as possible after timer expiration.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
- Delete CONFIG_TEST_USERSPACE=n no-ops because it's the default
since commit 7b1ee5cf13
- Some tests have a "userspace" tag pretending to TEST_USERSPACE but
don't and vice versa: fix missing or spurious "userspace" tags in
testcase.yaml files.
Tests have a _spurious_ "userspace" tag when they PASS this command
cause none should pass:
./scripts/sanitycheck --tag=userspace -p qemu_x86 \
--extra-args=CONFIG_TEST_USERSPACE=n \
--extra-args=CONFIG_USERSPACE=n | tee userspace.log
All tests run by this command must either fail to build or fail to run
with some userspace related error. Shortcut to look at all test
failures:
zephyr_failure_logs() {
awk '/see.*log/ {print $2}' "$@"
}
Tests _missing_ "userspace" tag FAIL to either build or to run with some
userspace related error when running this:
./scripts/sanitycheck --exclude=userspace -p qemu_x86 \
--extra-args=CONFIG_TEST_USERSPACE=n \
--extra-args=CONFIG_USERSPACE=n | tee excludeuserspace.log
Note the detection methods above are not 100% perfect because some
flexible tests like tests/kernel/queue/src/main.c evade them with #ifdef
CONFIG_USERSPACE smarts. Considering they never break, it is purely the
test author's decision to include or not such flexible tests in the
"userspace" subset.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This commit changes the timer_api test in order to take under account
fact that timeouts used in the test might not be aligned to tick
boundary.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The 14 individual cases that use these four config files are now
passing reliably when SMP is enabled, after the "Mark sleeping threads
suspended" scheduler fix. Turn it back on.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Removing the build_only option for tickless broke CI (for reasons
unrelated to the new tests I added in the prior commit).
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
In some circumstances (e.g., a tickless kernel), k_timer_remaining_get()
would not account for time passed that didn't involve clock interrupts.
This adds a simple fix for that, and adds a test case. In addition, the
return value of k_timer_remaining_get() is clamped at 0 in the case of
overdue timers and the API description is adjusted to reflect this.
Fixes: #13353
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
(Chunk 3 of 3 - this patch was split across pull requests to address
CI build time limitations)
Zephyr has always been a uniprocessor system, and its kernel tests are
rife with assumptions and outright dependence on single-CPU operation
(for example: "low priority threads will never run until this high
priority thread blocks" -- not true if there's another processor to
run it!)
About 1/3 of our tests fail right now on x86_64 when dual processor
operation is made default. Most of those can probably be recovered on
a case-by-case basis with simple changes (and a few of them might
represent real bugs in SMP!), but for now let's make sure the full
test suite passes by turning the second CPU off. There's still plenty
of SMP coverage in the remaining cases.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The test_timer_periodicity test is racy and subject to initial state
bugs. The operation of that test is to:
1. Start a timer with a known period
2. Take the current time with k_uptime_get()
3. Wait for the timer to fire with k_timer_status_sync()
4. Check that the current time minus start time is the period
But that's wrong, because a tick expiring between any of the first
three steps is going to skew the math (i.e. the timer will have
started on a different tick than the "start time").
And taking an interrupt lock around the process can't fix the issue,
because in the tickless world we live in k_uptime_get() is actually a
realtime quanity based on a hardware counter and doesn't rely on
interrupt delivery.
Instead, use another timer object to synchronize the test start to a
driver tick, ensuring that even if the race is unfixable the initial
conditions are always correct.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Qemu doesn't like tickless. By default[1] it tries to be realtime as
vied by the host CPU -- presenting read values from hardware cycle
counters and interrupt timings at the appropriate real world clock
times according to whatever the simulated counter frequency is. But
when the host system is loaded, there is always the problem that the
qemu process might not see physical CPU time for large chunks of time
(i.e. a host OS scheduling quantum -- generally about the same size as
guest ticks!) leading to lost cycles.
When those timer interrupts are delivered by the emulated hardware at
fixed frequencies without software intervention, that's not so bad:
the work the guest has to do after the interrupt generally happens
synchronously (because the qemu process has just started running) and
nothing notices the dropout.
But with tickless, the interrupts need to be explicitly programmed by
guest software! That means the driver needs to be sure it's going to
get some real CPU time within some small fraction of a Zephyr tick of
the right time, otherwise the computations get wonky.
The end result is that qemu tends to work with tickless well on an
unloaded/idle run, but not in situations (like sanitycheck) where it
needs to content with other processes for host CPU.
So, add a flag that drivers can use to "fake" tickless behavior when
run under qemu (only), and enable it (only!) for the small handful of
tests that are having trouble.
[1] There is an -icount feature to implement proper cycle counting at
the expense of real-world-time correspondence. Maybe someday we might
get it to work for us.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Added test to cover the case where the app can start the timer
even before the previous one is expired. In this case the timer
will start with latest settings or params.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add test case description and doxygen groups for tracebility.
Add references to APIs being tested in timer component.
Signed-off-by: Praful Swarnakar <praful.swarnakar@intel.com>
