Commit graph

8 commits

Author SHA1 Message Date
Marc Herbert debade9121 tests: make find_package(Zephyr...) REQUIRED
... because it is (required).

This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.

In this particular case, REQUIRED turns this harmless looking log
statement:

-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
  Cannot specify sources for target "app" which is not built by
  this project.

... into this louder, clearer, faster and (last but not least) final
error:

CMake Error at CMakeLists.txt:5 (find_package):
  Could not find a package configuration file provided by "Zephyr" with
  any of the following names:

    ZephyrConfig.cmake
    zephyr-config.cmake

  Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
  "Zephyr_DIR" to a directory containing one of the above files.  If
  "Zephyr" provides a separate development package or SDK, be sure it
  has been installed.

-- Configuring incomplete, errors occurred!

Signed-off-by: Marc Herbert <marc.herbert@intel.com>
2020-05-29 10:47:25 +02:00
Torsten Rasmussen 407b49b35c cmake: use find_package to locate Zephyr
Using find_package to locate Zephyr.

Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.

Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.

It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.

Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
2020-03-27 16:23:46 +01:00
Stephanos Ioannidis 2d7460482d headers: Refactor kernel and arch headers.
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.

The refactoring strategy used in this commit is detailed in the issue

This commit introduces the following major changes:

1. Establish a clear boundary between private and public headers by
  removing "kernel/include" and "arch/*/include" from the global
  include paths. Ideally, only kernel/ and arch/*/ source files should
  reference the headers in these directories. If these headers must be
  used by a component, these include paths shall be manually added to
  the CMakeLists.txt file of the component. This is intended to
  discourage applications from including private kernel and arch
  headers either knowingly and unknowingly.

  - kernel/include/ (PRIVATE)
    This directory contains the private headers that provide private
   kernel definitions which should not be visible outside the kernel
   and arch source code. All public kernel definitions must be added
   to an appropriate header located under include/.

  - arch/*/include/ (PRIVATE)
    This directory contains the private headers that provide private
   architecture-specific definitions which should not be visible
   outside the arch and kernel source code. All public architecture-
   specific definitions must be added to an appropriate header located
   under include/arch/*/.

  - include/ AND include/sys/ (PUBLIC)
    This directory contains the public headers that provide public
   kernel definitions which can be referenced by both kernel and
   application code.

  - include/arch/*/ (PUBLIC)
    This directory contains the public headers that provide public
   architecture-specific definitions which can be referenced by both
   kernel and application code.

2. Split arch_interface.h into "kernel-to-arch interface" and "public
  arch interface" divisions.

  - kernel/include/kernel_arch_interface.h
    * provides private "kernel-to-arch interface" definition.
    * includes arch/*/include/kernel_arch_func.h to ensure that the
     interface function implementations are always available.
    * includes sys/arch_interface.h so that public arch interface
     definitions are automatically included when including this file.

  - arch/*/include/kernel_arch_func.h
    * provides architecture-specific "kernel-to-arch interface"
     implementation.
    * only the functions that will be used in kernel and arch source
     files are defined here.

  - include/sys/arch_interface.h
    * provides "public arch interface" definition.
    * includes include/arch/arch_inlines.h to ensure that the
     architecture-specific public inline interface function
     implementations are always available.

  - include/arch/arch_inlines.h
    * includes architecture-specific arch_inlines.h in
     include/arch/*/arch_inline.h.

  - include/arch/*/arch_inline.h
    * provides architecture-specific "public arch interface" inline
     function implementation.
    * supersedes include/sys/arch_inline.h.

3. Refactor kernel and the existing architecture implementations.

  - Remove circular dependency of kernel and arch headers. The
   following general rules should be observed:

    * Never include any private headers from public headers
    * Never include kernel_internal.h in kernel_arch_data.h
    * Always include kernel_arch_data.h from kernel_arch_func.h
    * Never include kernel.h from kernel_struct.h either directly or
     indirectly. Only add the kernel structures that must be referenced
     from public arch headers in this file.

  - Relocate syscall_handler.h to include/ so it can be used in the
   public code. This is necessary because many user-mode public codes
   reference the functions defined in this header.

  - Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
   necessary to provide architecture-specific thread definition for
   'struct k_thread' in kernel.h.

  - Remove any private header dependencies from public headers using
   the following methods:

    * If dependency is not required, simply omit
    * If dependency is required,
      - Relocate a portion of the required dependencies from the
       private header to an appropriate public header OR
      - Relocate the required private header to make it public.

This commit supersedes #20047, addresses #19666, and fixes #3056.

Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
2019-11-06 16:07:32 -08:00
Anas Nashif 3ae52624ff license: cleanup: add SPDX Apache-2.0 license identifier
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier.  Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.

By default all files without license information are under the default
license of Zephyr, which is Apache version 2.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2019-04-07 08:45:22 -04:00
Anas Nashif 5060ca6a30 cmake: increase minimal required version to 3.13.1
Move to latest cmake version with many bug fixes and enhancements.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2019-01-03 11:51:29 -05:00
Reto Schneider 7eabab2f5d samples, tests: Use semi-accurate project names
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.

This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.

Signed-off-by: Reto Schneider <code@reto-schneider.ch>
2018-10-27 21:31:25 -04:00
Sebastian Bøe 55ee53ce91 cmake: Prepend 'cmake_minimum_required()' into 'app' build scripts
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.

Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.

To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.

This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.

The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.

Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
2018-08-15 04:06:50 -07:00
Anas Nashif eeae0eeffb tests: kernel: put all thread tests on one level
Remove unnecessary deep hierarchy and put all tests on one level.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-05-26 09:16:42 -04:00
Renamed from tests/kernel/threads/lifecycle/thread_init/CMakeLists.txt (Browse further)