Remove CONFIG_MP_NUM_CPU=1 from test cases of msgq.
For CONFIG_MP_NUM_CPU > 1, start a thread with K_NO_WAIT to get
message from message queue will run immediately on another cpu and
cause message peek failure if there is no message in queue, so put
messages in msgq before start that thread.
Signed-off-by: Meng xianglin <xianglinx.meng@intel.com>
These five tests (mbox_api, mheap_api_concept, msgq_api, pipe_api and
queue) all had test cases where they needed a mem_pool allocation to
FAIL. And they are all written to assume the behavior of the original
allocator and not the more general k_heap code, which actually
succeeds in a bunch of these cases.
* Even a very small heap saves enough metadata memory for the very
small minimum block size, and this can be re-used as an allocation.
So you can't assume a small heap is full.
* Calculating the number of blocks based on "num_blocks * max size /
minimum size" and allocating them does not fill the heap, because
the conservative metadata reservation leaves some space left over.
So these have all been modified to "fill" a heap by iteratively
allocating until failure.
Also, this fixes a benign overrun bug in mbox. The test code would
insert a "big" message by reading past the end of the small message
buffer. This didn't fail because it happened to be part of an array
of messages and the other ones defined contained the memory read. But
still.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Kernel timeouts have always been a 32 bit integer despite the
existence of generation macros, and existing code has been
inconsistent about using them. Upcoming commits are going to make the
timeout arguments opaque, so fix things up to be rigorously correct.
Changes include:
+ Adding a K_TIMEOUT_EQ() macro for code that needs to compare timeout
values for equality (e.g. with K_FOREVER or K_NO_WAIT).
+ Adding a k_msleep() synonym for k_sleep() which can continue to take
integral arguments as k_sleep() moves away to timeout arguments.
+ Pervasively using the K_MSEC(), K_SECONDS(), et. al. macros to
generate timeout arguments.
+ Removing the usage of K_NO_WAIT as the final argument to
K_THREAD_DEFINE(). This is just a count of milliseconds and we need
to use a zero.
This patch include no logic changes and should not affect generated
code at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The requests are somewhat larger on 64-bit since we
are allocating structs with pointer members. Increase
these to a larger multiple of the minimum block size.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Re-run with updated script to convert integer literal delay arguments
to k_thread_create and K_THREAD_DEFINE to use the standard timeout
macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Disabling SMP mode for certain tests was a one-release thing, done to
avoid having to triage every test independently (MANY are not
SMP-safe), and with the knowledge that it was probably hiding bugs in
the kernel.
Turn it on pervasively. Tests are treated with a combination of
flagging specific cases as "1cpu" where we have short-running tests
that can be independently run in an otherwise SMP environment, and via
setting CONFIG_MP_NUM_CPUS=1 where that's not possible (which still
runs the full SMP kernel config, but with only one CPU available).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This is testing size_mul_overflow() in z_impl_k_msgq_alloc_init() so
make sure OVERFLOW_SIZE_MSG is large enough even on 64-bit targets.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This was never a long-term solution, more of a gross hack
to get test cases working until we could figure out a good
end-to-end solution for memory domains that generated
appropriate linker sections. Now that we have this with
the app shared memory feature, and have converted all tests
to remove it, delete this feature.
To date all userspace APIs have been tagged as 'experimental'
which sidesteps deprecation policies.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
CONFIG_APPLICATION_MEMORY was a stopgap feature that is
being removed from the kernel. Convert tests and samples
to use the application shared memory feature instead,
in most cases using the domain set up by ztest.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These tests need to use stack size as a function of
CONFIG_TEST_EXTRA_STACKSIZE. These test will fail when
CONFIG_COVERAGE is enabled.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
With the new implementation we do not need a NULL terminated list
of kobjects. Therefore the list will only contain valid entries
of kobjects.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This test is intended to validate k_msgq_alloc_init()
and k_msgq_cleanup(), when CONFIG_USERSPACE is not defined.
Also added test to validate k_msgq_get() api, if any thread is
pending to write in message queue.
Signed-off-by: Ajay Kishore <ajay.kishore@intel.com>
User mode can't be trusted to provide a memory buffer to
k_msgq_init(). Introduce k_msgq_alloc_init() which allocates
the buffer out of the calling thread's resource pool and expose
that as a system call instead.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Group tests under 'Zephyr Tests' and only document the actual tests.
Create cross references to APIs being tested where applicable.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For posix layer implementation of message queue, we need to fetch
basic attributes of message queue. Currently this routine is not
present in Zephyr. So adding this routing into message queue.
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Unnecessary k_thread_abort() removed from test_msgq_purge_when_put.
A single global msgq object is now shared instead of being declared
on thread stacks, except for an ISR test case which has had its
semaphore renamed.
Moved k_sem_init() call from msgq_thread() to test_msgq_thread()
to fix a race condition.
userspace tag added to testcase.yaml.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Arguments are not needed and in some cases are being set as unused in
the same function. The test_main function is called from ztest main
routine without any arguments.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Test whichever had Camel case defined for functions and variables have
been replaced.
Following warnings have been fixed in test cases as well.
- line over 80 characters
- Macros with flow control statements should be avoided
- Macros with complex values should be enclosed in parentheses
- break quoted strings at a space character
- do not add new typedefs
- Comparisons should place the constant on the right
side of the test
- suspect code indent for conditional statements
- Missing a blank line after declarations
- macros should not use a trailing semicolon
- Macros with multiple statements should be
enclosed in a do - while loop
- do not use C99 // comments
JIRA: ZEP-2249
Signed-off-by: Punit Vara <punit.vara@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I6c676bc6c5e850a8725785554cd535e32067f33e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
ztest has a number of assert style macros and used a baseline assert()
that varies from the system definition of assert() so lets rename
everything as zassert to be clear.
Change-Id: I7f176b3bae94d1045054d665be8b5bda947e5bb0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
"ret" returned from k_msgq_put() should be checked.
Coverity-CID: 160084
Change-Id: I192db3a67ab9489e8338f6636d4c2a6935e98d74
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
the commit cover basic message queue api testing across contexts
and some typical scenario
Change-Id: I82bb0c6a5df9d4436f5a98f78d1ad989e32282c8
Signed-off-by: jing wang <jing.j.wang@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
