A HID application can no longer write to the default
interrupt IN endpoint because the addresses are assigned
dynamically. Add hid_int_ep_write() function and leave
it to the hid-core to call the usb_write() with the correct
endpoint address.
fixes: #8424
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This fixes invalid assert condition.
As stated in Bluetooth Core v5.0 Vol 3 Part F
3.4.4.1 Read By Type Request &&
3.4.4.9 Read by Group Type Request
"The starting handle shall be less than or equal to the
ending handle."
3.4.3.1 Find Information Request &&
3.4.3.3 Find By Type Value Request
"Only attributes with attribute handles between and
including the Starting Handle parameter and the Ending
Handle parameter that match the requested attribute type
and the attribute value that have sufficient permissions
to allow reading will be returned."
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Adapt functions for new composite interface.
Assign bInterfaceNumber and similar variables of a Interface
default values, these should be valid values for non-composite
configuration. For the case of the composite configuration,
these variables must be set by the interface configuration
function (interface_config) accordingly.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This patch reworks composite device support. It allows the
functions to be modular and the user to combine its own
functions with the USB functions of the Zephyr OS.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Introduce function to configure interface descriptor at runtime.
It is simple to leave the corresponding function to configure the
interface descriptor and fix bInterfaceNumber and iInterface values,
for example.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Add the routine to validate endpoint address and update the endpoint
descriptors and usb_ep_cfg_data at runtime.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This patch changes all class functions so that the endpoint
address will be retrieved from the usb_ep_cfg_data at runtime.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This patch moves the descriptor parts to related class
and function drivers and extends the usb_fix_descriptor
function so that the wTotalLength and bNumInterfaces
are corrected before enumeration.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This patch simplifies the handling of the string descriptors.
It introduces common macro for all string descriptors to
calculate the length of the bString.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The ARRAY_SIZE() utility macro will actually test the parameter types,
and ensure that it is only called with arrays, and not arrays decayed
to pointers.
Changes were performed with a simple Coccinelle script.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Invalid configurations should be detected during configuration instead
of during compilation whenever possible.
This patch replaces a BUILD_ASSERT on CONFIG_SYSTEM_WORKQUEUE_PRIORITY
with what is intended to be an equivalent Kconfig restriction.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Remove include guards in internal files; it is an agreed
convention to not have include guards in internal header
files in Bluetooth subsystem.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The Kconfig option HID_INTERRUPT_EP_MPS does not have a prompt entry,
so it is not configurable in practice. Fix that.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Introduce a quirks field to the HCI driver struct, which can be used
to create exceptions in host behavior for non-standard or unusual
controller behavior. An initial quirk is added to prevent the host
from sending the HCI_Reset command (in which case the controller is
responsible for performing the reset).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is the simplest & cleanest way to make these APIs available for
drivers. We already have a public hci.h header file, so using it seems
most natural.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
'default false' should have been 'default n', though they happen to have
the same effect here, due to undefined Kconfig symbols ('false')
evaluating to 'n' in a boolean sense.
Kconfig bool symbols implicitly default to 'n', so remove the default
rather than fixing it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Invalid configurations should be detected during configuration instead
of during compilation whenever possible.
This patch replaces a BUILD_ASSERT on CONFIG_NET_BUF_USER_DATA_SIZE
with what is intended to be an equivalent Kconfig restriction.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Currently, we add TCP options only to SYN+ACK reply to peer's SYN
(i.e. passive open). For consistency, add them also when we send
SYN ourselves (active open). In both cases, we add just MSS option
currently.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Ethernet header is always filled in the first fragment of a packet,
so passing it as a separate function paramter is supefluous.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
There's an apparent typo in testing net_buf headroom. Also, after
adding VLAN header support, its size should be used too.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
There was no proper support to timeout an ARP requests which meant
that trying to resolve non-existent IP address left network packet
pending on ARP cache.
Fixes#8019
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Recent commits which made the choice of attribute to pass to
bt_gatt_notify() more flexible contained some unfortunate bugs in
handling the attributes and their values. In particular, both calls to
gatt_notify() would in certain circumstances pass the wrong handle
value. This should now be fixed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For debugging purposes it is useful to know which interface
the dropped packet was received.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The 'source' of subsys/net/ip/Kconfig in subsys/net/Kconfig is already
within an 'if NETWORKING' block, so the NETWORKING dependency in
subsys/net/ip/Kconfig is redundant.
Remove the redundant dependency.
This gets rid of a bunch of 'NETWORKING && NETWORKING' dependencies in
the auto-generated Kconfig docs.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
According to the Bluetooth Specification v5.0, Direct Test
Mode shall use maximum Tx power.
Fixed by adding nRF5x Radio HAL interfaces to get supported
maximum Tx power for SoC selected, and DTM testing sets the
Radio peripheral to use maximum Tx power.
Fixes#7243
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Initially, there was support only for buffered input, and adhoc var
names used. Later, buffered output support was added, with variables
consistently using "tx_" prefix. Now, rename the original RX path
to use symmetric "rx_" prefix.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Because per-interface statistics rely on interface pointer stored in a
net_pkt, it should not be unreferenced before stats are updated.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Functions for per-interface statistics collection used a pointer to a
packet that could've been deallocated in the net_conn callback function.
In result, application could crash when interface related to the packet
was referenced. To fix that, packet interface is stored earlier, so it
can be used instead for statistics collection.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The IP stack drops any TCP segment which doesn't fit into our
receive window. However, we still must accept Zero Window Probe
segments, which are segments, usually with data length of 1, which
a peer sends to us after we stayed with zero window for some time.
In this case, we need to repeat an ACK with the old ack number.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Use transfer API for ACL out transfers. No extra buffer is requested,
directly use the net buf and update its len on transfer completion.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Bluetooth net buffers have 1-byte reserve, which can be used by HCI bus
driver (uart, spi...) to set packet type (H4).
This fixes assert when building hci_usb with CONFIG_NET_BUF_SIMPLE_LOG.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Calling bt_send from IRQ context is not safe, at least in HCI SPI case.
In the same way as hci_core, create a thread for TX.
This fixes hci_usb sample for 96b_carbon board.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Catch interface up/down events so that we can renew the
address if interface goes down and is then restored.
Fixes#7553
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add net_eth_carrier_on() and net_eth_carrier_off() functions that
can be called by ethernet device driver when it detects that carrier
is lost or found.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It's rather confusing to not see current TCP state in any way (it
makes distinguishing different TCP contexts very hard). And nobody
can know/remember that it's printed with CONFIG_NET_DEBUG_TCP
defined. So, just make it be printed always (initially I thought
about printing just numeric value if CONFIG_NET_DEBUG_TCP isn't
defined, but why, if we can print symbolic name easily).
Also, add a hint that defining CONFIG_NET_DEBUG_TCP will still
print even more info (like unacked pkt list) - similarly to
similar helpful hints we have in other parts of net shell.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Let's set it by default when allocating net_pkt. A macro will avoid
ifdefs as well
CONFIG_NET_TX_DEFAULT_PRIORITY is always defined.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Introduce a custom HCI driver for the native POSIX port, which opens a
HCI User Channel socket to the Linux kernel to gain access to a local
Bluetooth controller.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With updates to bt_gatt_notify and bt_gatt_indicate it is now possible
to pass the Characteristic attribute instead of its value which makes
the code able to verify if attribute properties are set correctly.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since BT_GATT_CHARACTERISTIC now expands to 2 attributes it may be
confusing to use bt_gatt_indicate as that expects the Value attribute to
be given which is no longer visible, so this enables the user to use
the Characteristic attribute in addition to its value.
Fixes#8231
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since BT_GATT_CHARACTERISTIC now expands to 2 attributes it may be
confusing to use bt_gatt_notify as that expects the Value attribute to
be given which is no longer visible, so this enables the user to use
the Characteristic attribute in addition to its value.
Fixes#8231
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When disabling an ethernet interface, only its cache entries need to be
cleared up and not the whole cache. This is meaninful in case there is
2+ ethernet interface instances.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
