If the device does not support wifi offloading, then return -ENOTSUP
so that wifi support can be enabled for testing purposes even if
the actual device does not have wifi support. This is happens for
example in qemu which does not support wifi offloading.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that we define and declare the _net_app_register() and
_net_app_unregister() functions properly if net_app logging level
is set to debug.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Convert the monitor protocol to a proper logger backend. This also
means that our log.h headerfile gets greatly simplified.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that log processing happens in a separate thread, the
BT_STACK_EXTRA macro is not needed (since there's no significant
overhead), and therefore the BT_STACK macros become unnecessary as
well.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use irq_lock (same way as bt_hex does it) and increase the number of
static buffers to reduce the risk of reuse before a buffer gets
processed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
1. Changed return value of function: shell_cmd_precheck from bool to
int. Now it returns:
0 when argument count is correct and help print is not requested
1 when help was requested and printed
-EINVAL on wrong arguments count
This change simply shell_cmd_precheck usege in command handlers.
2. Unified all commands in shell_cmd.c file.
3. Fixed a bug where help was not printed on wrong argument count.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This shell command was tied to bluetooth and the bluetooth shell and
also had messages all related to nordic ICs.
Make it generic and put it under drivers/flash/ so it can be included by
anyone and independently of bluetooth.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add 2 new flags to control the output of newlines by the logger output
module. By default the logger adds both CR and LF, and with these 2 new
flags it is now possible to request LF only or no newlines at all.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Mkae sure that variable pointed by params is valid when passing it
as function argument.
Fixes#10587
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Typo when calculating new value for local_time_n.low, the calculation
was just a constant expression and the value was not modified.
Coverity-CID: 188759
Fixes#10568
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The connection index was printed incorrectly in debug print.
Coverity-CID: 188742
Coverity-CID: 188753
Fixes#10583#10574
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add an API for force suspending the devices. This API can be
called during unexpected system shutdown/poweroff scenarios
to safely turnoff the devices.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
This patch fixes the compile error when CONFIG_NET_PKT_LOG_LEVEL
is LOG_LEVEL_DBG.
> subsys/net/ip/net_shell.c: In function ‘context_info’:
> subsys/net/ip/net_shell.c:2893:106: error: ‘struct net_buf_pool’
> has no member named ‘avail_count’
> subsys/net/ip/net_shell.c:2893:125: error: ‘struct net_buf_pool’
> has no member named ‘name’
In struct net_buf_pool, 'avail_count' and 'name' are depends on
CONFIG_NET_BUF_POOL_USAGE.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Check for NULL IPv6 addr values from net_if_ipv6_get_ll() in rpl.c
If NULL, print out an error statement stating that no proper IPv6
address was found
Coverity-CID: 188169
Fixes#10094.
Signed-off-by: Satya Bhattacharya <satyacube@gmail.com>
Improve the error feedback when calling bt_le_adv_start and inputting
too much data in the advertisement.
Error feedback before:
Bluetooth initialized
Advertising failed to start (err -22)
Error feedback after:
Bluetooth initialized
[bt] [ERR] set_ad: Advertising data does not fit in buffer
Advertising failed to start (err -22)
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This flag is an indication to the timer driver that the OS doesn't
care about rollover conditions of the tick count while idling, so the
system doesn't need to wake up once per counter flip[1]. Obviously in
that circumstance values returned from k_uptime_get_32() are going to
be wrong, so the implementation had an assert to check for misuse.
But no one understood that from the docs, so the only place these APIs
were used in practice were as "guards" around code that needed to call
k_uptime_get_32(), even though that's 100% wrong per docs!
Clarify the docs. Remove the incorrect guards. Change the flag to
initialize to true so that uptime isn't broken-by-default in tickless
mode. Also move the implemenations of the functions out of the
header, as there's no good reason for these to need to be inlined.
[1] Which can be significant. A 100MHz ARM using the 24 bit SysTick
counter rolls over at about 6 Hz, and if it had to come out of
idle at that rate it would be a significant power issue that would
swamp the gains from tickless. Obviously systems with slow
counters like nRF or 64 bit ones like RISC-V or x86's TSC aren't
as affected.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This was only used in a few places just to indirect the already
perfectly valid SYS_CLOCK_TICKS_PER_SEC value. There's no reason for
these to ever have been kconfig units, and in fact the distinction
appears to have introduced a hidden/untested bug in the power
subsystem (the two variables were used interchangably, but they were
defined in reciprocal units!).
Just use "ticks" as our time unit pervasively, and clarify the docs to
explain that.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add monochrome character framebuffer for monochrome
graphic dot matrix displays and electrophoretic displays.
These displays are mostly monochrome and can only display
black and some other color, for example white. Typically,
a byte controls 8 pixels, arranged vertically or horizontally
depending on the controller or settings.
The API is not suitable to display graphics, the purpose is
to display text or symbols. It is possible to use several fonts.
A font can also consist of graphic symbols only and thus,
for example, enable the realization of a menu.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Add option to disable legacy pairing and only use secure connection.
If legacy pairing was requested pairing will be denied with status
insufficient authenticated
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added implementation to avoid retransmitting NACK-ed Tx PDU,
to save on current consumption in retrying to transmit in
case peer device has no free buffer to receive the PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
To allow the BLE stack to be used both in the real nRF platforms
and simulated ones, change the used macros in the code to the
COMPATIBLE ones.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Fix broken master role RSSI measurement. Since the original
contribution clean up into Zephyr, the radio shorts that was
set for measuring the RSSI for master role has been broken,
as it was cleared by the radio switching code further in the
Tx ISR.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Recently, the wifi net offload driver has been asserting
as init_iface() was checking for api->send != NULL, even in
the case of NET_OFFLOAD
This patch suggests a fix to handle the NET_OFFLOAD case.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Fix connection failed to be established regression
introduced by the commit 350c569aba ("Bluetooth:
controller: Avoid offseting to lldata").
As the Rx-ed PDU buffer is re-used to construct the
connection complete message towards HCI, the fields in the
Rx-ed PDU need to be backup for future use in the control
path. Here the channel selection bit is backup now.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move ECM functionality from netusb to function_ecm making defines not
needed in many cases.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fix Connection Parameter Request Procedure implementation
to respond with sent interval_min and interval_max so that
certain peer devices dont reject the response as Invalid LL
Parameters.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
