The net_dhcpv4_stop() function stops the event listener for any IF_UP
events previously. In case multiple interfaces are used and optionally
being switched over, it could result in disabling dhcp unintentionally.
The callback is initialized at the init function and added/removed in
the start/stop function based on the interface list being empty
or not. (first added, last removed)
The event handler checks if the interface is in the list before acting
on it.
Signed-off-by: Vincent van der Locht <vincent@vlotech.nl>
In case "net_dhcpv4_stop(..) is called when the interface is
in NET_DHCPV4_RENEWING state, the address is not removed.
When deleting the address in the NET_DHCPV4_RENEWING state
means the status is always equal to the moment before _start
is called.
Signed-off-by: Vincent van der Locht <vincent@vlotech.nl>
Remove network specific default and max log level setting
and start to use the zephyr logging values for those.
Remove LOG_MODULE_REGISTER() from net_core.h and place the
calls into .c files. This is done in order to avoid weird
compiler errors in some cases and to make the code look similar
as other subsystems.
Fixes#11343Fixes#11659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
1. Created new shell module: shell_help.
2. Simplified command handlers with new shell print macros.
3. Removed help functions from command handlers.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removed printing command help from help handler. It is now
realized by the shell engine. This change saves a lot of flash
but still allows to print help in command handler with function
shell_help_print.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removing help "options" from shell API.
Currently SHELL_OPT macro is not used by users. What is more
commit: a89690d10f ignores possible options created in
command handler by the user. As a result they are not printed
in help message.
Second, currntly implemented "options" in command handlers options are
implemented without SHELL_OPT macro.
And last but not least this change will allow to implement
help handler in a way that user will not need to think about calling
functions printing help in a command handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
USB CDC ACM is a serial driver like another. Therefore select both
SERIAL_HAS_DRIVER and SERIAL_SUPPORT_INTERRUPT. This allows one to
enable the console driver without having to enable another serial
driver.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The CDC ACM driver has to emulate the TX and RX interrupts from the USB
ones. However it does not correctly emulate them as "TX buffer empty"
and "RX buffer not empty" interrupts.
For "TX buffer empty" interrupt:
- Reading the interrupt status should not clear the interrupt
- Enabling the interrupt should fire an interrupt if the TX buffer is
empty
- An interrupt should be triggered when the USB device get configured
For "RX buffer not empty" interrupt:
- Reading the interrupt status should not clear the interrupt
- Enabling the interrupt should fire an interrupt if the RX buffer is
not empty
This make the a console on the USB CDC ACM port usable for the shell
and the logs.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix issue caused by 3fc497ac9a
This change removes `rtt` and `systemview` from header includes
as these are already placed in the path.
Also `SEGGER_SYSVIEW_ConfDefaults.h` header included from
`SEGGER_SYSVIEW_Int.h` is placed higher to make sure `INLINE`
definition is properly visible.
Signed-off-by: Pawel Dunaj <pawel.dunaj@nordicsemi.no>
Shell log backends were initialized from shell context. After
lowering logger thread priority order has been flipped. That
revealed a bug where shell logger backend was enabled before
backend ID's has been assigned during logger initialization.
ID assignment is moved to log backend enabling function making
it independent of order of initialization.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
No need to store/reset/recompute the chksums, only compute it again and
if it's not 0: drop the packet.
RFC 1071:
"To check a checksum, the 1's complement sum is computed over the
same set of octets, including the checksum field. If the result
is all 1 bits (-0 in 1's complement arithmetic), the check succeeds."
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
IPv4, ICMPv4/6, UDP, TCP: all checksums are meant to be one's complement
on a calculated sum. Thus return one's complement already from the right
place instead of applying it in each and every place where
net_calc_chksum is called.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Removed kconfig option for setting shell thread priority and fix
it to K_LOWEST_APPLICATION_THREAD_PRIO.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Improved reception in the backend and replaced thread
with periodic timer as thread was used only to
periodically poll RTT data availability and using timer
is more RAM-wise efficient.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Idle rate functionality has been implemented for HID USB class.
Bassed on Device Class Definition for Human Interface Devices 1.11.
Tested with USB3CV and host with idle rate.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
HID class now defaults to universal request callbacks in case they
are not provided by the application. This applies to following,
class-specific requests: Get_Report, Set_Report, Get_Idle, Set_Idle,
Get_Protocol and Set_Protocol.
Tested with USB3CV.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Allow logging subsystem to send the logging messages to outside
system. This backend implements RFC 5424 (syslog protocol) and
RFC 5426 (syslog over UDP).
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Rephrase some help messages to decrease flash usage.
Deactivate shell history feature for test test_netusb_rndis
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Resize command requires shell to be working on UART interrupt
driven API. This will be now enabled by default when shell serial
backend is selected. Recently this feature was accidentally turned
off in PR #11556.
k_sleep(1) has been replaced with k_busy_wait(1000) to avoid
hanging in command handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Shell used to require adding commands and subcommands in alphabetical
order to ensure correct autocompletion and printing options with the
<Tab> key.
Commit: bd3a4e5fe5 implemented correct
options printing with the <Tab> key for not sorted commands.
This PR allows to partially autocomplete not sorted commands.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Add missed out helper functions to update the errors.tx and error.rx
in the stats structure.
Signed-off-by: Fadhel Habeeb <fadhel@zilogic.com>
Signed-off-by: Nirav Parmar <niravparmar@zilogic.com>
Signed-off-by: Vijay Kumar B <vijaykumar@zilogic.com>
Timestamp function and pool for log_strdup were initialized
in log thread initialization while they should be initialized
in log_core_init() which is performed earliest possible. Log
API was using uninitialized data when called before log thread
was started.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
gPTP subsystem was calling pow(x,y) function with X and Y being
constants; these are replaced with the pre-computed values.
Signed-off-by: Andrei Laperie <andrei.laperie@intel.com>
1. Clarify message telling that the actual packet length fed by the
driver differs from what specified in IPv4 header, and that leads to
drop.
2. Debug log any dropped packets in general.
These changes come from the experience of developing a networking
driver, where figuring out why packets get dropped may require
quite a head-scratching.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Extended backend interface to allow notifying backend
that log messages has been dropped due to insufficient
internal buffer size. Notification contains number of
log messages dropped since last notification. It
is optional for a backend to implement handler.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
If USE_SEGGER_RTT option was enabled then LOG_BACKEND_RTT was
enabled by default. In case shell RTT was also used then both
write to RTT. Updated Kconfig to prevent such situation.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Explicitly track the connection update related ticker stop
and start to avoid asserting due to ticker update being done
at the same time for compensating the clock drift.
The compensation related ticker update failure in this case
can be safely ignored as new anchor point is used anyway
at the instant of the connection update.
Fixes#8796
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If we receive extra data at the end of the IP message, then
discard that data and accept the packet.
Fixes#11649
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Such sent flag is in a union in net_pkt, shared with a gptp flag.
Tweaking it when the family is not AF_INET or AF_INET6 will generate
corrupted gptp packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of redoing what Ethernet L2 already does, let just create the
gptp message without any Ethenet header. Which one will be done as
sending phase by Ethernet L2 relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As for Ethernet, up to ieee802154 L2's send to actually sent the packet.
It's currently unoptimized as 6lo compression, 15.4 fragmentation and so
on will reallocate net_buf etc... but it's the first step towards
removing ll reserve space and more.
Applying changes to Openthread L2 as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now instead of such path:
net_if_send_data -> L2's send -> net_if tx_queue -> net_if_tx -> driver
net_if's send
It will be:
net_if_send_data -> net_if tx_queue -> net_if_tx -> L2's send -> driver
net_if's send
Only Ethernet is adapted, but 15.4 and bt will follow up.
All Ethernet drivers are made compatible with that new scheme also.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that sending is done at last time, in one pass, no need to go
through net_if_send_data here.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
