Use the new API where relevant. Only sam_gmac is left aside for now.
This simplifies a lot the code as the caller should only care about
allocating net_pkt and its buffer once, and thus will not need to mess
with "frags" etc...
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is the easiest piece to change using the new API, and can be used
as showing how this API can be used.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This API is meant to work with pre-allocated net_pkt.
It assumes net_pkt's buffer cursor is at the right position where to
create the UDP header. Once done, the cursor will be placed right after
the newly created UDP header.
Finalizing assumes the same.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This API is meant to work with pre-allocated net_pkt.
It assumes net_pkt's buffer cursor is at the right position where to
create the IPv4 header. Once done, the cursor will be placed right
after the newly created IPv4 header.
Finalizing assumes the same.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These ones would support linearizing non-contiguous area, however
requiring a bit more complex type as an "accessor".
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adding a cursor into net_pkt. This is used to read/write data in a much
simpler way, for pre-allocated buffers in net_pkt. This avoids API users
to deal with net_buf below directly.
However, to be used - as for the new allocators - it will require deep
net stack core and API changes.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These struct net_pkt allocators will give the possibility to allocate at
once the net_pkt and the buffer associated with, taking care of the
header space and MTU relevantly.
This enables to use the variable length allocator from net_buf. However,
it is not yet the default and is set as experimental.
As it is provided in parallel to existing allocators, it has to keep a
slab per-direction and thus a pointer in net_pkt, as well as appdata,
appdatalen etc... Resulting in "bloating" net_pkt. This will be solved
when, finally, former allocators will be removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The net-app API is removed. Users should use the BSD socket API
for application development.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Previously, the net_app layer handled DNS support as a part of
network initialization. With the move to BSD-socket APIs,
we need to add support for DNS to the LwM2M library.
Signed-off-by: Michael Scott <mike@foundries.io>
This commit resets the firmware status to IDLE after a bad
download attempt. Previously, the firmware object would stay
in an odd state and any further attempts to download firmware
would return an error.
Signed-off-by: Michael Scott <mike@foundries.io>
We can save some resources by removing the periodic service thread
and replacing it by queuing the services to the work queue.
Before (reel_board using BT + DTLS)
Memory region Used Size Region Size %age Used
FLASH: 289464 B 1 MB 27.61%
SRAM: 75620 B 256 KB 28.85%
IDT_LIST: 136 B 2 KB 6.64%
After
Memory region Used Size Region Size %age Used
FLASH: 289576 B 1 MB 27.62%
SRAM: 74596 B 256 KB 28.46%
IDT_LIST: 136 B 2 KB 6.64%
Signed-off-by: Michael Scott <mike@foundries.io>
Now that the security data can be loaded into and used from the
security / server objects, we can add support for LwM2M bootstrap.
This is a mode where initially a connection can be made to a server
which can update several LwM2M (including security and server
data) and then trigger a "bootstrap complete". Once this happens
the client will start it's connection process over but now with
the new information.
Signed-off-by: Michael Scott <mike@foundries.io>
In order to support bootstrap mode, we need to store server data
in the security / server objects. Once the connection to the
bootstrap server is made, it will clear these objects and add
new server connection data.
Signed-off-by: Michael Scott <mike@foundries.io>
For bootstrap support, we need to store connection credentials
in the security object. This way the client can start a connection
at index 0 and after bootstrapping, move to the next connection.
Let's add the needed fields and a config item to set the key length.
Signed-off-by: Michael Scott <mike@foundries.io>
Update the parsing functions for JSON used by the JSON data
formatter and enable it in the LwM2M engine.
Signed-off-by: Michael Scott <mike@foundries.io>
The JSON formatter is currently not enabled for incoming WRITE
operations. To update the code in the formatter and not litter
the input context with extra data, let's allow formatters to
store their own user data.
Signed-off-by: Michael Scott <mike@foundries.io>
net_app contexts save the remote address and we use this during
observe notifications and pending handling. If we move to another
network layer such as sockets, then the remote address becomes
harder to reference. Let's save it as a part of the client
context.
Signed-off-by: Michael Scott <mike@foundries.io>
As part of the migration from net_app APIs to socket APIs, let's
stop referencing the net_pkt fragments throughout the LwM2M library.
Establish a msg_data flat buffer inside lwm2m_message and use that
instead.
NOTE: As a part of this change we remove the COAP_NET_PKT setting.
The COAP library reverts to COAP_SOCK behavior.
This doesn't mean we use sockets in LwM2M (yet), it only means we
use the socket-compatible COAP library which parses flat buffers
instead of net_pkt fragments.
Signed-off-by: Michael Scott <mike@foundries.io>
Currently, this will select the needed configs for LwM2M and net_pkt.
During the migration to socket APIs, the net_pkt selections will change
to socket-based selects.
Signed-off-by: Michael Scott <mike@foundries.io>
Fixed spelling mistake in shell's Kconfig file.
Updated description in SHELL_CMD_BUFF_SIZE description.
In shell.c: removed obsolete empty line, added empty line
at the end of file.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This commit updates the README and sample.yaml in order to signal
that this demo works flawlessly on the nRF51 platform.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
If the net_context functions are accessed from preemptive priority,
then we need to protect various internal resources.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We get the following warning when buiding with gcc8:
error: 'packed' attribute ignored for type 'u32_t *'
{aka 'unsigned int *'} [-Werror=attributes]
Use UNALIGNED_GET() to access the data since we don't know the
alignment.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The original SNTP client library was designed for the net-app API, for
which it makes sense to have a callback function, which is called
asynchronously when an answer is received.
For the socket based interface, the callback is called just before
sntp_request() returns. It gets the status and the epoch_time in
parameter, however the status is already returned by sntp_request(). It
therefore make sense to replace the callback function by a pointer to
epoch_time.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There are no longer per-partition initialization functions.
Instead, we iterate over all of them at boot to set up the
derived k_mem_partitions properly.
Some ARC-specific hacks that should never have been applied
have been removed from the userspace test.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Log backends (marked as autostart) are initialized late. By default
in logger thread which has the lowest priority. If log_panic() occurs
earlier no logs is printed because there is no backend enabled.
This patch fixes it by adding log_init() call to log_panic(). Log_init()
can be called multiple times.
This patch ensures that logs are printed if early panic occurs if
backend is configured to auto-start. This is not the case if shell
is acting as log backend.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
RTT log backend was locking in panic if host absense was not yet
detected (early panic). It is fixed by adding detection of host
absense while pending on data being read by the host.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added display text management to shell_fprintf function.
Now it can be used from diffrent threads with not risk that
displayed lines will overlay.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Removed foreground command functionality from shell source files.
Removed associated example.
Removed enter/exit command functions from the Bluetooth example
Updated project config files.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
After receiving FIN, the TCP stack will send a FIN and start
a timer to track the reception of the associated ACK. In case this
ACK is never received then the context will be released
without calling the associated received callback which leads to
upper layers not being informed that the connection was closed.
This issue was observed when using sockets, the effect is
that in this case the socket would never be closed and stay
in limbo forever.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
The relationship between lwm2m_engine_context and lwm2m_message
has always been a tenuous one. Let's merge the 2 structures
into lwm2m_message and remove all of the extra stack variables.
This change increases SRAM usage slightly due to the
addition of the context structures to the multiple lwm2m_messages.
However, the way lwm2m_engine_context was being used off the stack
was probably creating hard to debug issues in the longterm.
Also, having all of the structures in 1 place makes sharing them
much easier later.
Signed-off-by: Michael Scott <mike@foundries.io>
Reported by Github user himanshujha199640 using coccinelle:
subsys/net/lib/lwm2m/lwm2m_obj_device.c:172:5-16:
WARNING: Unsigned expression compared with zero.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/11135
Signed-off-by: Michael Scott <mike@foundries.io>
CONFIG_NET_CONTEXT_NET_PKT_POOL is used by Zephyr's TCP stack as
a way of keeping the original packet data when compression and
other l2 specific actions make the data unusable for retries.
LwM2M uses UDP and this option was never used.
Signed-off-by: Michael Scott <mike@foundries.io>
As networking libraries and protocols are moving to socket
based implementation, reworked SNTP client library to use sockets.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Commit 41f86c3db2 ("nvs: fix warnings in logger") wrongly changed the
"%d" into "%x" while it was only supposed to suppress the warning.
This patch switches back the format string to "%x".
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Function char_replace is only used in shell_ops.c file.
Added keyword static to function definition and removed
declaration from shell_ops.h
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Meta keys are active when they are enabled and when shell echo is set
to on.
Updated meta keys description in shell's Kconfig file.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Extended native posix backend to support new backend API for
'in place' mode.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added functions for processing log string and hexdump. Details
are passed as function parameters and not as log_msg. Those
functions can be used when logger works in synchronous mode
and log messages are not created.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
