The node_rx buffer for the connect ind buffer is being reused to send
connection complete event, make sure all data is backed up before
reusing the buffer.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The privacy state variables rl_idx and rpa_gen was not initialized
properly, which results in connection failing to be established.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix that removes magic numbers from the code that
leaded to the error codes that was hard to explain.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
The "select" command has been implemented, which allows user to
narrow down the command tree.
This implementation differs from the "select" command available
in the legacy shell. In a new implementation, if the selected
command has a handler and if the user has not entered the
registered subcommand, the shell will call the handler of selected
command and pass the text as arguments.
This may be useful, for example, if someone wants to use the
shell as an interface to a modem that supports AT commands.
Instead of each time you write e.g:
at at+command1
at at+command2
at at+command3
user can execute following commands:
select at
at+command1
at+command2
at+command3
where:
at - root command for passing at commands to the modem
at+commandX - at command passed to the modem.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The 32bits one can hold up to about 50 days, this is more than enough
knowing that ARP request timeout is 2 seconds.
So reducing the request start time to 32bits.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Do not always print general help for ping cmd. Only if user supplies
'-h' or '--help' command, print information about the parameters.
After this the generated HTML documentation looks better for the
ping command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Documentation moved to the right place.
The argument name of the macro is aligned between the macros.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
OpenThread uses CONFIG_OT_PLAT_FLASH_PAGES_COUNT to calculate the # of
pages at the end of flash to use for storing OpenThread settings.
This calculation has an off-by-one error which sets the offset for
the storage area as 1 page of flash too low.
For example, on nRF52840:
- default setting for CONFIG_OT_PLAT_FLASH_PAGES_COUNT is 4
- flash size is 1MB (0x100000)
- flash page size is 4096 (0x1000)
- expected offset is 0xfc000
Using the current logic we get an offset of: 0xfb000
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16339
Signed-off-by: Michael Scott <mike@foundries.io>
If the system sets its clock frequency at runtime, this is
stored in a variable that can't be directly read by user
mode. For this case only, add a system call to fetch its
value and modify the definition of
sys_clock_hw_cycles_per_sec() to use it.
Since this is now a system call, store in a temporary variable
inside z_ms_to_ticks(). The syscall overhead only applies
when called from user mode, other contexts are completely
inlined.
Added stub syscall header for mocking framework, to get rid
of inclusion errors.
Fixes: #16238
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Code refactored to allow calling of a proprietary rx demux function.
This will enable implementation of proprietary protocols and
functionality that is not yet public, while keeping a common zephyr
code base.
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
Fixes USB3CV Tool tests. One case is enabling endpoints with Set
Interface after Set Configuration. In this case we report warning and
continue without returning error.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This patch fixes following bug:
After first GC operation the 1st sector had become scratch
and the 2nd sector had became write sector. After that NVS
was initialize (via reboot) again - it recognized the 1st
sector as write sector and 2nd as undone GC destination sector,
therefore it cleared 2nd sector and re-run GC, which implied data loss.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
A conditional block to save a directed advertising report flag was
present three times. Remove two of the blocks.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Drop packet if it has broadcast destination MAC address but the IPv4
destination address is not multicast or broadcast address.
See RFC 1122 ch 3.3.6 for details.
Fixes#16276
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_if_ipv4_select_src_addr() should return global address
in the interface if nothing else is being found.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Let's filter out on a state parameter.
There is no impact as this function is not used anywhere yet.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If we receive a multicast ICMPv4 packet, then send the reply back
with correct source address and not with multicast address.
Fixes#16257
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Put the symbols that depend on DISK_ACCESS_{RAM,FLASH,SDHC} directly
after the symbol they depend on, so that they end up in an implicit
indented menu. That makes it easier to see which symbols are related.
It also indirectly makes all symbols children of DISK_ACCESS. To save a
menu level, turn DISK_ACCESS into a 'menuconfig' symbol and put it in
the top-level menu. Change its prompt from "Enable Disk Interface" to
"Disk Interface", to be consistent with e.g. "Logging".
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add an event handler for HCI vendor-specific events with the
event code BT_HCI_EVT_VENDOR.
A vendor defined callback can be registered to be called when
vendor-Specific events are received in the stack. The callback can then
decode and handle the event; if not the stack will decode and handle
the event.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Make sure we are able to receive UDP packets with broadcast
destination address. If CONFIG_NET_IPV4_ACCEPT_ZERO_BROADCAST
is set, then check here also non-standard broadcast address
that is described in RFC 1122 chapter 3.3.6.
Fixes#11617
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
From POSIX.1-2017:
The getsockname() function shall retrieve the locally-bound name of the
specified socket, store this address in the sockaddr structure pointed
to by the address argument, and store the length of this address in the
object pointed to by the address_len argument.
The address_len argument points to a socklen_t object which on input
specifies the length of the supplied sockaddr structure, and on output
specifies the length of the stored address. If the actual length of the
address is greater than the length of the supplied sockaddr structure,
the stored address shall be truncated.
If the socket has not been bound to a local name, the value stored in
the object pointed to by address is unspecified.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
When using the procedure Read By Type the response may contain multiple
instances so it needs to be parsed properly. When dealing with long
values only the beggining will be read, for the remaining bytes the
application should issue another bt_gatt_read with offset so Read Blob
procedure is used as recommended by the spec:
BLUETOOTH CORE SPECIFICATION Version 5.1 | Vol 3, Part F page 2312:
The Read Blob Request would be used to read the remaining octets of a
long attribute value.
Fixes#16107
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If host is NULL and ai_flags are AI_PASSIVE in a call to
getaddrinfo(), need to return "any" address.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
- Make the 'C++ Standard' choice depend on CPLUSPLUS, so that it only
shows up when C++ support is enabled.
Also check that CPLUSPLUS is enabled before checking the standard in
the top-level CMakeLists.txt, to avoid triggering an assert.
- The 'C++ Options' menu now contains just CPLUSPLUS and its indented
children. Remove one menu level by removing the menu and turning
CPLUSPLUS into a 'menuconfig' symbol. Also change the prompt from
"Enable C++ support for the application" to just "C++ support for the
application", to make it consistent with e.g. "Logging".
- Factor out the common CPLUSPLUS dependency with an 'if CPLUSPLUS'.
- Order symbol properties more consistently with other Kconfig files,
with the prompt at the top, etc.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The 'Console' menu contains just 'config CONSOLE_SUBSYS' and its
indented children.
Remove one menu level by removing the 'Console' menu and turning
CONSOLE_SUBSYS into a 'menuconfig' symbol.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This menu contains just the IMG_MANAGER symbol and its children. Remove
one menu level by making IMG_MANAGER a top-level 'menuconfig' symbol
instead.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
When compiling the kernel with CONFIG_SYS_CLOCK_TICKS_PER_SEC=0,
the CONFIG_SYS_CLOCK_EXISTS internal variable is unset.
This completely disables timer handling in the kernel, but a couple of
spots missed the required conditional compilation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Port fix for #14044 from legacy LL to split LL.
The master is using unknown rsp to terminate slave side initiated
procedures that has collided with the encryption procedure initiated by
the master.
We need to handle an unknown response that is sent in unencrypted during
the encryption procedure, even though we have already set up to receive
encrypted packets.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove comment stating that UNKNOWN_RSP during encryption procedure
is a workaround.
The core spec mandates that connections should not be dropped if
receiving this control packet during encryption procedure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use the new math_extras functions instead of calling builtins directly.
Change a few local variables to size_t after checking that all uses of
the variable actually expects a size_t.
Signed-off-by: Jakob Olesen <jolesen@fb.com>
This is a pure refactoring of the k32src_wait function. It used the
following rules when refactoring:
Don't use the preprocessor when unprocessed C language suffices.
Don't undefine macro's.
Avoid global variables when possible.
Use consistent names for similiar things (hf_clock, lf_clock).
Signed-off-by: Alexander Svensen <alsv@nordicsemi.no>
Fix broken master role RSSI measurement. Since the original
contribution clean up into Zephyr, the radio shorts that was
set for measuring the RSSI for master role has been broken,
as it was cleared by the radio switching code further in the
Tx ISR.
Signed-off-by: Alexander Svensen <alsv@nordicsemi.no>
We replied to an ARP request that has the same Sender Hardware Address
than that of ours. Such an ARP request must be discarded, no reply
should be sent and translation table should not be updated.
Fixes#16110
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If a packet is received with Ethernet source address different
from ARP's sender hardware address field, then DUT must use the
latter address in response packets.
Fixes#16098
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
