Have SHELL_BACKEND_RTT depend on USE_SEGGER_RTT instead of selecting it,
to fix some selects of USE_SEGGER_RTT with unsatisfied dependencies.
USE_SEGGER_RTT was being forced on without checking HAS_SEGGER_RTT.
This means configuration files now have to enable both USE_SEGGER_RTT
and SHELL_BACKEND_RTT to enable SHELL_BACKEND_RTT. At least
samples/subsys/shell/shell_module/prj_minimal_rtt.conf does.
(The original version of this commit added a dependency on
HAS_SEGGER_RTT to SHELL_BACKEND_RTT instead, but Krzysztof Chruscinski
suggested depending on USE_SEGGER_RTT instead.)
Footnote: 'depends on' conditions get propagated to properties, so this
change is the same as adding '... if USE_SEGGER_RTT' to all properties
(and the prompt).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
As mDNS requests set DNS id to 0, we cannot use it to match
the DNS response packet. In order to allow this functionality,
create a hash from query name and type, and use that together
with DNS id to match request and response.
Fixes#21914
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A neighbor solicitation packet for an address that is not ours should
not cause the sender to be added to the neighbor cache. See RFC 4861
section 7.2.3.
Add the neighbor to the cache when we have decided to respond to the
NS packet.
Fixes#21869.
Signed-off-by: Jonas Norling <jonas.norling@greeneggs.se>
Use the same code when parsing source link-layer address option for
both RA and NS packets. It looked like handle_ns_neighbor() could
actually read too much data into lladdr.addr when handling 8-byte
addresses (802.15.4).
Signed-off-by: Jonas Norling <jonas.norling@greeneggs.se>
ELM FatFS implementation supports LFN, enabled via ffconf.h
configuration file. Additionally, code page (character set),
max file name length, and memory mode (LFN working buffer location)
are configurable options closely related to LFN.
Without LFN filenames are restricted to 8.3 filename format.
Add kconfig options to expose following FatFS configurations:
enable LFN, specify max filename length, specify code page
(character set), specify LFN working buffer location.
Signed-off-by: Audun Korneliussen <audun.korneliussen@nordicsemi.no>
Fix assert in net_buf triggered on att encrypt change event.
ASSERTION FAIL [net_buf_simple_headroom(buf) >= len] @
ZEPHYR_BASE/subsys/net/buf.c:881
This happens because when the att request was allocated, it was not
properly initialized and req->retrying was left as true.
This caused the att encrypt change handling to assume an att request
needed to be resent, starting resending with an invalid request and
request buffer.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fixes some selects with unsatisfied dependencies. FLASH_SHELL depends on
FLASH_PAGE_LAYOUT, but only FLASH_SHELL is selected. The select was
introduced in commit 3aa2a1c6db ("flash: make flash shell generic").
Spoke to Johan Hedberg. The BT_SHELL code does not depend on
FLASH_SHELL. He didn't think people would assume that BT_SHELL by itself
enables the FLASH_SHELL commands either.
Just remove the select.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Zephyr aims to enable supporting of multiple SW defined
BLE LL. There is a complex hierarchy of defines in the
CMake files controlling the compilation units that part of
the final library. Adding another SW LL implementation
from a different SoC provider will make the main controller
CMake file unmaintable.
As such, split the into vendor-specific CMake files for
easier additions.
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Change adds missing Kconfig dependency.
The CONFIG_BT_CTLR_FILTER is used only for SW Link Layers.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
CONSOLE_GETCHAR and CONSOLE_GETLINE select CONSOLE_HANDLER and
UART_CONSOLE_DEBUG_SERVER_HOOKS, which depend on UART_CONSOLE, but
UART_CONSOLE is n for some boards, giving a select with unsatisfied
dependencies and a warning. Triggers in CI.
Looking at the code, CONSOLE_{GETCHAR,GETLINE} also depend on
UART_CONSOLE there. Add a 'depends on UART_CONSOLE' to the 'choice' that
contains them.
Maybe the samples/subsys/console/{echo,getchar}/ samples shouldn't be
run on some boards that they're currently run on, but there's still the
issue that CONSOLE_{GETCHAR,GETLINE} shouldn't be shown in menuconfig
when they don't apply.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Make ioctl handlers of `ZFD_IOCTL_POLL_PREPARE` and
`ZFD_IOCTL_POLL_UPDATE` return an error code instead of setting errno
variable.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A memory corruption could happen in `uncompress_IPHC_header` function,
when data was moved to make place in the net buffer for the uncompressed
IPv6/UDP header.
The size of data being moved should only contain the original data size,
not incremented by the amount of space needed to expand the header,
which was already added to the net buffer size. In result, the `memmove`
operation could exceed the allocated net buffer and cause memory
corruption.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
NFFS is removed as it has serious bugs (by design) which haven't
been resolved since extended range of time.
One of most serious issues bunch were described here:
https://github.com/apache/mynewt-nffs/issues/10
Since lack of support NFFS upsterem it doesn't make sense to keep
it in zephyr.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Function cpu_stats_get_ns from CPU stats module returns
invalid time, because of unnecessary conversion into u32_t.
Higher bits of time value are removed during this conversion.
All time values are u64_t, so there is no need to convert anything.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
Refactor use of #ifdef to IS_ENABLED() pattern for handling cancellation
of outgoing connection attempt. Reduce the amount of indentation by
combining outer if-statements.
Move handling of canceled create connection into a helper function.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix advertiser requested to use the identity address while privacy
feature is enabled will change to using RPA address when advertise is
resumed or when RPA timeout occurred.
RPA timeout does not need to run when advertiser is using identity.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add shell command for advertise with identity option to have the
possibility to temporarily disable privacy feature in the advertise from
the shell.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Handle initiator role when RPA timeout expires. For direct connect
establishment procedure we make sure the RPA is refreshed when starting
initiator and limit the timeout to the RPA timeout.
For auto establishment procedure we cancel the initiator and restart it
again in the connection complete event that is generated when canceling
an initiator.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Handle starting of advertiser and scanner or initiator when advertiser
is using a different identity than the default identity to generate the
random resolvable address in the controller.
We need to handle this only for the privacy case because the random
address is set in the RPA timeout handler and not from the API.
When privacy is disabled we can return error code from the LE Set Random
Address HCI command instead.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix RPA timeout handling when the scanner is active. An active scanner
must be restarted at RPA timeout otherwise the Set Random Address
command will fail.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor the handling of sending the LE Create Connection command and
for whitelist and direct initiator to use the same host state flag
and common handling of the privacy address.
Also simplify the way we check if the procedure has already been started
when application tries to start it again.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Handle a possible race condition in the host connection state.
Set the conn state of the connection object before command is sent. This
is in case the calling function is not scheduled again before the
connection complete event arrives. In this case find_pending_conn will
not find the connection object.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Starting a background scanner for auto-connection is an API that is only
available when whitelist API is not enabled.
There is currently no way to set this bit when the whitelist API is
enabled so there is not any issues with the current code, but it is
still not correct.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When receiving a connection complete event but no connection object are
available in the host something strange has happened. In this case
the controller might have a connection that cannot be controlled by the
application. It would then be sensible to disconnect this connection in
the controller.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add sample demonstrating the integration of CANopenNode in Zephyr to
support the CANopen protocol.
This fixes#15278.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add support for CANopen LED indicators according to the CAN in
Automation (CiA) 303-3 specification.
This fixes#15278.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add support for storing the CANopen object dictionary to non-volatile
storage.
This fixes#15278.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add a Zephyr driver and abstraction layer for use by the 3rd party
CANopenNode module.
CANopenNode depends on the CO_driver.h file for platform-specific type
definitions, locking primitives, and CAN bus driver API.
This fixes#15278.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
If no other route is found, the network interface prefixes are
evaluated. If a matching interface is found, the packet is sent out on
this interface.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
The address family of the received packet must be set, before routing
it. E.g. the ethernet driver would drop the packet if this is not
done.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Add function that returns remaining time until next keep alive message
shall be sent. Such function could be used for instance as a source
for `poll` timeout.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
generated_dts_board.h is pretty redundant and confusing as a name. Call
it devicetree.h instead.
dts.h would be another option, but DTS stands for "devicetree source"
and is the source code format, so it's a bit confusing too.
The replacement was done by grepping for 'generated_dts_board' and
'GENERATED_DTS_BOARD'.
Two build diagram and input-output SVG files were updated as well, along
with misc. documentation.
hal_ti, mcuboot, and ci-tools updates are included too, in the west.yml
update.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Moving struct definitions into header file and adding API to
allow accessing data-structures from lll context
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
HAS_SEGGER_RTT is assigned by various Nordic boards, but assignments
have no effect on promptless symbols. This symbol is enabled through
being select'ed by SOC_SERIES_NRF52X.
Holyiot, nRF52833-PCA10100, nRF52840-PCA10056, and nRF52-PCA10040 only
assign HAS_SEGGER_RTT without assigning USE_SEGGER_RTT. They probably
meant to enable USE_SEGGER_RTT, so do that instead.
Also add a help text to HAS_SEGGER_RTT and a warning re. HAS_SEGGER_RTT
vs. USE_SEGGER_RTT to the documentation.
Flagged by https://github.com/zephyrproject-rtos/zephyr/pull/20742.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix unable to select the Zephyr Vendor-Specific HCI commands support in
host-only build. Set VS HCI support as default on if it is known that
the controller supports it. Otherwise set it to off, this means that
VS HCI support will be default off in host-only builds.
Fixes: #21996
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The transition from LISTEN to SYN_SENT nullifies the th,
guard on th being NULL in SYN_SENT.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In case the final ACK for the connection establishment arrives
out of order, evaluate the sequence number in SYN_RECEIVED,
so the data packet isn't false identified as a final ACK.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to simplify the evaluation of the incoming data,
add len and evaluate the data for the incoming packet once.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Create a new connection only for the SYN packet,
otherwise pass a packet into existing connection.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
The initial logic with this check is too restrictive,
do not bail-out on unconsumed flags.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
