Rename the API's with 'list' which uses the term 'stream'.
For example 'at_open_stream' is renamed to 'at_open_list' and
the same applies for other API's which uses 'stream' in it.
Change-Id: I62bed70de3d85cd4890b10e04eba27ae2de1907c
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
The private_key parameter to generate_keys is supposed to be 32 bytes
in size, i.e. an array of 8 uint32_t variables.
Change-Id: Ia891fd68bfd8662983b898084e5a8524b7a9b8e2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adds driven by user params buffer location to be populated by UUID
resolved data. Corresponding handlers responsible for connected and
disconnected states of L2CAP transport channel used by SDP PSM traffic
automatically allocates and unrefs such memory. Data receiving handler
performs buffer fill up.
Jira: ZEP-1112
Change-Id: I8aa97e6e69344dca0f241a4e9097acac75e14a7c
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds two extra checks against invalid length of attribute payload
frame.
Jira: ZEP-1112
Change-Id: I089442a5b9631471f9f394860681f1483e021c43
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Iterates all UUID params list delivered by user. When iteration finish
release SDP client L2CAP transport channel.
Jira: ZEP-1112
Change-Id: I0602e32a5296a05719ad1385b4aff537350b3e7d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This commit introduces a very light-weight and lock-less
scheduling of the Controller's deferred function calls
called the Mayfly.
Earlier work implementation used in the Controller had an
O(n) to schedule a function in a linked list that used IRQ
lock during modification of the linked list in the
Controller's ISR executions.
Mayfly is a compile time configurable matrix of queues
where an execution context-safe queue exists between two
execution context, one being the caller and the second
being the callee. Callee(s) are run in a software interrupt
but can also be run in an OS thread.
There are minor clean ups too in this commit related to
folder structure.
Change-id: I5ff44dcee6679d2f5ce9e8437d98d6c868782f3d
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Enable connection encryption setup in 3 connection
intervals. Peripheral will respond to Encryption Request
with Encryption Response in the same connection interval,
and also, will respond with Start Encryption Response PDU in
the 3rd connection interval, hence completing encryption
setup in 3 connection intervals. Encrypted data would be
transmitted as fast as in 3rd connection interval from the
connection establishment. Maximum CPU time in Radio ISR will
increase if this feature is selected.
Change-id: I16f2863fc2aaed624826505739519d4de1ac44c5
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add Kconfig configuration to select Tx buffer size, this
value will be returned in the HCI LE Read Buffer Size
command response.
This configuration will allow lower Tx RAM usage when
larger PDU sizes are desired in Rx direction only.
Change-Id: I5106a448d78a0754c4b0f6fa61fd5dcacd87a67c
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add Kconfig configuration and conditional compilation of
RSSI measurement during a connection.
Change-id: I5a2f23f76a7cbbd9569d53d31899a472bf39d3ee
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add Kconfig configuration to conditionally enable Data
Length Update procedure support in the Controller.
This will save CPU time, flash and RAM, if this feature is
not desired.
Change-id: I4515c0c7cf9aeb333a289397ae3c9bac04a08e4e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Add additional conditional compilation of code not needed
when LE Ping is disabled in Kconfig.
Change-id: Idab40b1371488e06a6f2009fb553f7655b7b86f3
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Adds initial handling of SDP Service Search Attribute response PDU.
Currently attributes data are not collected. Main focus was done on
proper handling PDU continuation state to be able receive whole
requested SDP record(s) if found for given UUID.
< ACL Data TX: Handle 74 flags 0x00 dlen 24
Channel: 64 len 20 [PSM 1 mode 0] {chan 3}
SDP: Service Search Attribute Request (0x06) tid 1 len 15
Search pattern: [len 5]
Sequence (6) with 3 bytes [8 extra bits] len 5
UUID (3) with 2 bytes [0 extra bits] len 3
OBEX Object Push (0x1105)
Max record count: 65535
Attribute list: [len 7]
Sequence (6) with 5 bytes [8 extra bits] len 7
Unsigned Integer (1) with 4 bytes [0 extra bits] len 5
0x0000ffff
Continuation state: 0
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 74
Count: 1
> ACL Data RX: Handle 74 flags 0x02 dlen 68
Channel: 64 len 64 [PSM 1 mode 0] {chan 3}
SDP: Service Search Attribute Response (0x07) tid 1 len 59
Attribute bytes: 48
Continuation state: 8
cd 91 5a 58 30 00 00 00 ..ZX0...
< HCI Command: Host Number of Completed Packets (0x03|0x0035) plen 5
Num handles: 1
Handle: 74
Count: 1
< ACL Data TX: Handle 74 flags 0x00 dlen 32
Channel: 64 len 28 [PSM 1 mode 0] {chan 3}
SDP: Service Search Attribute Request (0x06) tid 2 len 23
Search pattern: [len 5]
Sequence (6) with 3 bytes [8 extra bits] len 5
UUID (3) with 2 bytes [0 extra bits] len 3
OBEX Object Push (0x1105)
Max record count: 65535
Attribute list: [len 7]
Sequence (6) with 5 bytes [8 extra bits] len 7
Unsigned Integer (1) with 4 bytes [0 extra bits] len 5
0x0000ffff
Continuation state: 8
cd 91 5a 58 30 00 00 00 ..ZX0...
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 74
Count: 1
> ACL Data RX: Handle 74 flags 0x02 dlen 68
Channel: 64 len 64 [PSM 1 mode 0] {chan 3}
SDP: Service Search Attribute Response (0x07) tid 2 len 59
Attribute bytes: 48
Continuation state: 8
cd 91 5a 58 60 00 00 00 ..ZX`...
< HCI Command: Host Number of Completed Packets (0x03|0x0035) plen 5
Num handles: 1
Handle: 74
Count: 1
< ACL Data TX: Handle 74 flags 0x00 dlen 32
Channel: 64 len 28 [PSM 1 mode 0] {chan 3}
SDP: Service Search Attribute Request (0x06) tid 3 len 23
Search pattern: [len 5]
Sequence (6) with 3 bytes [8 extra bits] len 5
UUID (3) with 2 bytes [0 extra bits] len 3
OBEX Object Push (0x1105)
Max record count: 65535
Attribute list: [len 7]
Sequence (6) with 5 bytes [8 extra bits] len 7
Unsigned Integer (1) with 4 bytes [0 extra bits] len 5
0x0000ffff
Continuation state: 8
cd 91 5a 58 60 00 00 00 ..ZX`...
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 74
Count: 1
> ACL Data RX: Handle 74 flags 0x02 dlen 19
Channel: 64 len 15 [PSM 1 mode 0] {chan 3}
SDP: Service Search Attribute Response (0x07) tid 3 len 10
Attribute bytes: 7
Continuation state: 0
Combined attribute bytes: 103
Attribute list: [len 99] {position 0}
Attribute: Service Record Handle (0x0000) [len 2]
0x00010001
Attribute: Service Class ID List (0x0001) [len 2]
UUID (3) with 2 bytes [0 extra bits] len 3
OBEX Object Push (0x1105)
Attribute: Protocol Descriptor List (0x0004) [len 2]
Sequence (6) with 3 bytes [8 extra bits] len 5
UUID (3) with 2 bytes [0 extra bits] len 3
L2CAP (0x0100)
Sequence (6) with 5 bytes [8 extra bits] len 7
UUID (3) with 2 bytes [0 extra bits] len 3
RFCOMM (0x0003)
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x09
Sequence (6) with 3 bytes [8 extra bits] len 5
UUID (3) with 2 bytes [0 extra bits] len 3
OBEX (0x0008)
Attribute: Browse Group List (0x0005) [len 2]
UUID (3) with 2 bytes [0 extra bits] len 3
Public Browse Root (0x1002)
Attribute: Bluetooth Profile Descriptor List (0x0009) [len 2]
Sequence (6) with 6 bytes [8 extra bits] len 8
UUID (3) with 2 bytes [0 extra bits] len 3
OBEX Object Push (0x1105)
Unsigned Integer (1) with 2 bytes [0 extra bits] len 3
0x0100
Attribute: Unknown (0x0100) [len 2]
OBEX Object Push [len 16]
Attribute: Unknown (0x0303) [len 2]
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x01
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x02
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x03
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x04
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x05
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0x06
Unsigned Integer (1) with 1 byte [0 extra bits] len 2
0xff
Jira: ZEP-1112
Change-Id: Ie282782fba6ef06c6826b3e624f83c8f4c94ebbe
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
The following readings were obtained after running the peripheral and
central_hr apps in qemu combined with the controller (hci_uart) on nRF51
and nRF52:
Main Stack 380
Idle Stack: 68
ISR stack: 532
Controller RX Stack: 388
HCI TX Stack: 516
The numbers set in this change provide a safety margin from the ones
measured empirically.
Change-id: Ice7ad7f081502e0ea1accf856a7937c0bf0783b2
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
reserve parameter of bt_l2cap_create_pdu() is incorrectly passed
as timeout.
Change-Id: Ieed293f52c2e98f16f1e43c498140178703236db
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
For consistency with RX_STACK_SIZE and the rest of stack sizes, rename
to use the normal naming scheme.
Change-id: Ib8d484482466fa8d629e6329e07b927abdd6f598
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add Kconfig configuration to conditionally enable LE Ping
feature in the Controller.
This will save CPU time, flash and RAM, if this feature is
not desired.
Change-id: I5fbbdbe8f45ac01c9b0d7b11e002a0d1db4d272e
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
The data pointer and length was not updated before invoking the
write_rsp function therefore providing pointer to the handle.
Change-Id: I5c27ab7a793979dffb8f1f2c68def027c45f2376
Signed-off-by: Louis Caron <louis.caron@intel.com>
This should also have been net_buf_add_mem(). Otherwise the buffer
gets corrupted.
Change-Id: I4687584777f446d398182c3e8c2cde5946987da4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move code that can be executed after radio tx/rx packet ptr
has been assigned in the radio h/w.
Change-id: I9c5a34ee6bb74c1265d7871bcdf93894e3e7b190
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Added code to profile radio ISR execution time and generate
an event, which can be used to populate a vendor HCI event.
This event and associated code is disabled, subsequent
patch will add kconfig to enable it.
Change-id: Ic3fa3e0f4e36829a22a25ffee039949eaae561a7
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Use BT_WARN instead of BT_ASSERT to display unknown rsp in
HCI layer.
Change-id: I63c792468d9c4768f69df73395ee026a03521704
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Peer controllers not supporting LE Ping feature will
respond with unknown response PDU, handle it internally in
the controller rather than exposing it to HCI layer.
Discovered that controller was passing the unknown rsp PDU
to HCI layer when LE Ping was send to Nexus 5.
Unknown response for slave feature request was forwarded to
HCI layer, during that implementation unknown rsp for LE
ping too was getting forwarded to HCI layer.
Change-id: I4396c482e5546d78239cf41d88728de996e48d7d
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
This call was supposed to be net_buf_add_mem().
Change-Id: I5e4a718474905c433533fd1c1d7e8e0b7ff35739
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This helps simplify code that was previously combining net_buf_add()
with memcpy().
Change-Id: If44cf9cd651aba5e544e36567869f147468663eb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
And it's not really a debugging option either, one might want to use it
for the features it brings. Thus moving it out of Kconfig.debug.
Change-Id: Ie1e2d2bcba94ad4b8354d3cc56087227184039b6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's make net stack having its own level of debugging through sys_log.
It replaces NET_DEBUG by NET_LOG_ENABLED, which is then semantically
better: someone wanting to log the errors might want that not only for
debugging.
Along with it, CONFIG_NET_LOG_GLOBAL option is added, in order to enable
all available logging in network stack. It is disabled by default but
might be found useful when warning/errors need to be logged, so it is
then unnecessary to selectively enable by hand all CONFIG_NET_DEBUG_*
options.
It is possible, locally, to override CONFIG_SYS_LOG_NET_LEVEL by setting
the level one want to NET_SYS_LOG_LEVEL. This can be useful on samples
or tests.
Change-Id: I56a8f052340bc3a932229963cc69b39912093b88
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's possible to know from which pool the nbuf comes from so
let's reduce nbuf size by removing its internal type attribute which
becomes then useless.
When a data buffer is not coming from nbuf data buffer pool, let's call
it "EXTERNAL", just to make debugging handling a little simple in the
code.
Change-Id: I6931394c8c4f594137f6380be0a0ba5cea371040
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use the interface function rather than writing directly to the iface
structure. Check for errors in nbuf read.
Change-Id: I75311755c2060b640325962ada28adea597cb914
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Detect non local IPv4 destination addresses earlier and route them via
the gw address. Ensure that the ARP table is populated with the GW
address rather than the final destination address.
Jira: ZEP-1473
Change-Id: I3b628584148b760340ef0fea4da4e8893702c832
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
s/energy_est/estimation when using net_rpl_node_energy_object.
Change-Id: I4b326a0dbbca11d48de0c595dfe843495fe10e04
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's much different than IPv4 where it's possible to find the whole
packet length. Here it has to count also the ipv6 header size by itself.
Jira: ZEP-1422
Change-Id: I84b1602ac75ef81b9ceda7898ca9dedf2e54d633
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
User application can request the information it wants via the generic
net_mgmt() call, following the NET_REQUEST_STATS_* codes.
Change-Id: Ia9e7d318cf11b7bf8bfaf1ad63c8c985be846cc1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will help to track only what's wanted (ipv6, tpc, udp, else...) if
needed to.
Change-Id: I5c2e5e582db629b5d0e1cd98004f693c50f532a4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's change from macros to inlined function to make things nicer.
Change-Id: Ie98e0667613961b03c84ca60bc551d0f473765f6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This file will own more statistics handling in a near future.
Change-Id: Ifaf86852f5c7166e6878b5dc8f4cd4c166dbee90
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It clutters a bit the code with ifdefs but it's quite useful when
debugging.
Change-Id: I4f6899d052921b8ef8a7ec2f6e7df927a1bca2f1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
