Just changes to the west help output; no functional changes expected.
Make option descriptions lowercase to match the argparse module's
conventions. When multiple sentences are required, move them to parser
prolog/epilog or argument group description sections.
Clarify some points that have confused multiple people.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
If we pass --west-flash with no additional argument that was getting
treated the same as if it wasn't passed at all.
Change the check to be based on 'None' to handle the bare --west-flash
case properly.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
classname in the junit report was not being used correctly since the
beginning. We had the targetname in the classname and put all results in
1 single testsuite.
The new output add 1 single testsuite for each platform and simplifies
the classname so that tests of the same classname can be grouped in
output, producing readable reports.
The current output can be seen here:
https://testing.zephyrproject.org/daily_tests/zephyr-v2.2.0-2533-gdbbf834605/report/index.html
This should much better once we have this change in.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In some cases we were not handling return code correctly and evaluating
timeouts as a pass. Report failure correctly.
Fixes#26065
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Move the --erase option to core.py from nrfjprog.py and jlink.py,
where it is currently supported.
Using the RunnerCaps option enforcement mechanism introduced earlier,
enforce that it will only be given to runners that support it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Require all implementations to provide a do_create(), a new
ZephyrBinaryRunner abstract class method, and make create() itself
concrete.
This allows us to enforce common conventions related to individual
runner capabilities as each runner provides to the core via
RunnerCaps.
For now, just enforce that:
- common options related to capabilities are always added, so runners
can't reuse them for different ends
- common options provided for runners which don't support them emit
sensible error messages that should be easy to diagnose and support
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We can just call super() instead of super(MyClassName, self). The
original extra verbosity is likely due to old habits of mine from
Python 2 which are no longer necessary, but got copy/pasted around.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
For iterable areas defined with Z_STRUCT_SECTION_ITERABLE(),
the corresponding output section in the linker script is just
boilerplate. Add macros to make these definitions simpler.
Unfortunately, we have a fair number of iterable sections not
defined with Z_STRUCT_SECTION_ITERABLE(), this patch does not
address this.
The output sections are all named <struct name>_area, update
sanitylib.py with this.
sys_sem with no userspace, and k_lifo/k_fifo are special cases
where different data types that are all equivalent need to be
put in the same iterable area. Add
Z_STRUCT_SECTION_ITERABLE_ALTERNATE() for this special case.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The argparse module, by default, complains about non-defined
arguments. This prevents passing arguments prefixed with '-'
or '--' to the target script (e.g. calling another Python
script using argparse). This changes the misc-flasher script
so that any arguments not recognized by west will be passed
to the target script.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The start_addr attribute of Stm32flashBinaryRunner is an integer. It
must be converted to a string before being concatenated with a colon and
the (already converted to a string) size to erase or write.
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Disables the Debug-Access-Port of the microcontroller after flashing.
If not disabled, the DAP consumes ~1.6mA until the debugger disables it
or a hard power cycle is applied.
The DAP is typically automatically disabled after flashing, but if other
instances of JLink software are running (not connected), it will not be.
The added command resets the value of the CTRL/STAT register of the DAP.
This clears the CSYSPWRUPREQ and CDBGPRWUPREQ bits, leaving the debug
hardware free to power off the appropriate hardware. In no way does it
hinder the ability to later connect to the device for debugging.
This resolves the jlink portion of #26139
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add warning about enabling the options below so that users are
aware that this is a security risk.
- CONFIG_BT_DEBUG_SMP
- CONFIG_BT_DEBUG_KEYS
- CONFIG_BT_OOB_DATA_FIXED
- CONFIG_BT_USE_DEBUG_KEYS
- CONFIG_BT_STORE_DEBUG_KEYS
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
test_testsuite_class.py: Added testcases for load_From_file and
apply_filters functions of Class Testsuite.
conftest.py: Modified class_testsuite fixture to create the
outdir as temporary directory which gets deleted after execution
of testcases.
test_data/sanitycheck.csv: load_from_file function uses this
customized file to load the failed or last run testcases.
test_data/sanitycheck_keyerror.csv: file used by
test_load_from_file function to raise the appropriate error
if there is a keyerror.
scripts/requirements-build-test.txt: added mock & csv python libraries
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
test_testsuite_class.py: Added testcases for add_configurations(),
get_all_testcases(), get_toolchain() and get_platforms() functions
test_data/board_config: board root directory for all board
configurations. This is also to add the platform configurations
in a list which is used for further testing.
conftest.py: Added fixtures for all_testcases_dict (returns a
dictionary of testcases) and platforms_list (returns a list of
all platforms using add_configurations function).
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
Convert the description comment at the top of the file to a
documentation string. That string then maybe viewed with the --help
argument. Also, rework a bit the documentation string: remove usage,
since that is provided by the help message of the argparse module.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
MCMUMGR file system management is discouraged in production, just
adding it to the recommendation list.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Remove Kconfig, linker script, and related bits associated with
CUSTOM_RODATA_LD, CUSTOM_RWDATA_LD, CUSTOM_SECTIONS_LD,
SOC_NOINIT_LD, SOC_RODATA_LD, and SOC_RWDATA_LD options that have been
deprecated since Zephyr 2.2.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert the description comment at the top of the file to a
documentation string. That string then maybe viewed with the --help
argument. Also, rework a bit the documentation string.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
This commit introduces the possibility of adding dependencies between
Zephyr modules to ensure that a Zephyr module on which other modules
depends is processed first.
The dependency chain is ordered using a topological sort.
This allows to add dependencies to a zephyr/module.yml as:
build:
cmake: .
depends:
- fatfs
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
* add the runner script for metaware debugger(mdb).
* mdb is required for SMP case
* mdb also can provides a GUI interface
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Prior to addition of schema validation running sanitycheck
--generate-hw-map would preserve the value of any field in an existing
map that it didn't update. These fields now cause a parsing error.
Add notes as an optional key where information relevant to the board
can be added to provide useful context (such as which serial port
corresponds to the console, or why a non-standard runner is required).
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
probe_id is used as an optional key that overrides id as the source
of board_id when configured to use a runner that is not the default.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
* Tweak west_setup:
- log `west update` to a file to reduce noise in log
- use `west forall` + `git reset` to make sure files are checked out
(this is to handle a possible module cache)
* Output when we start sanity_check. Add a banner for when we run
sanity_check so it's a bit easier to find in console logs
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
test_testinstance.py: Add testcases for check_build_or_run()
create_overlay() and calculate_sizes()
conftest.py: Module for common pytest fixtures
test_data/board_config: Adding test data for board configurations
Signed-off-by: Spoorthy Priya Yerabolu <spoorthy.priya.yerabolu@intel.com>
Now that we are standardizing C99 integer types we can revert the commit
that warned about C99 type usage.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We now have a low-level function z_dynamic_object_create()
which is not a system call and is used for installing
kernel objects that are not supported by k_object_alloc().
Checking for valid object type enumeration values moved
completely to the implementation function.
A few debug messages and comments were improved.
Futexes and sys_mutexes are now properly excluded from
dynamic generation.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Any data structure declaration tagged with __net_socket will end up
in the kernel object table with type K_OBJ_NET_SOCKET. These all
correspond to objects which are associated with socket file
descriptors and can handle the socket vtable API.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Now we can build up lists of data structures matching a list
of particular tags, with __subsystem being just one case.
Relax searches to also look inside C files, since struct
prototypes may be declared there as well.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Certain types of system call validation may need to be pushed
deeper in the implementation and not performed in the verification
function. If such checks are only pertinent when the caller was
from user mode, we need an API to detect this situation.
This is implemented by having thread->syscall_frame be non-NULL
only while a user system call is in progress. The template for the
system call marshalling functions is changed to clear this value
on exit.
A test is added to prove that this works.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add test cases that verify various bits and pieces of the legacy
devicetree macros match the new APIs.
Writing these test cases without giving rise to deprecated macro
warnings which might break people's CI if they build with -Werror
requires turning off the __WARN() generation in
devicetree_legacy_unfixed.h. The entire file is deprecated at this
point and must be explicitly enabled with an opt-in Kconfig option, so
there isn't any harm in doing this.
Nevertheless, take a minimally invasive approach to avoiding __WARN()
generation in gen_legacy_defines.py, to avoid the possibility of
breakage. This code is basically frozen anyway, so hacks like this
won't cause maintainability problems since it isn't being actively
maintained.
Use the new tests as fodder for a migration guide from the old API in
the documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Some updates to the reference page for the "core" APIs, and associated
follow-ups in the guides:
- centralize documentation of chosen zephyr nodes in a non-legacy
file, provide a reference to them from the intro page in the guide
- review doxygen docstrings and correct errors for generic APIs
- add introductory text to each section in the API reference
- add missing hardware-specific pages
Documentation for layers built on top of these is mostly left to future
commits, but I do have a smattering of fixes in the guides that I
noticed while I was doing this.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
In step 4 of find_kobjects, use func debug instead of debug_die
to dump debug info to avoid dump wrong info.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
If a test instance from .yaml file was skipped due to being on
a filtered list then there are no entries about it in the
sanitycheck_report.xml for a given platform. This commit fills
instance.results with skipped test cases also for skipped instances so
those test cases are visible when the full report is generated. Tested
for ./tests/kernel/mem_protect/userspace on nrf52dk_nrf52832 where
userspace.gap_filling is filtered out.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
It is now possible to add a list of fixture a platform supports which is
matched to testcases requesting fixtures to be avaiable to be able to
run.
For example:
- available: true
connected: true
id: 0240000026334e450015400f5e0e000b4eb1000097969900
platform: frdm_k64f
product: DAPLink CMSIS-DAP
runner: pyocd
serial: /dev/ttyACM9
fixtures:
- gpio_loopback
Fixes#24943
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Cleanup fixture processing and allow ztest testcases to support
harness_config with fixture definition.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If environment variables ZEPHYR_BASE or NET_TOOLS_BASE are unset, an
incorrect message is printed saying that "it is set, but it is not a
directory":
$ZEPHYR_BASE is unset
$ZEPHYR_BASE is set, but it is not a directory
$NET_TOOLS_BASE is unset, no net-tools found
$NET_TOOLS_BASE set, but it is not a directory
This patch fixes that issue.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
test_testsuite_class.py: Add testcases for add_testcases function
of testsuite class in sanitycheck.
test_data/testcases/tests & /samples : Testcase root directory
to add all the testcases & to test add_testcases function.
conftest.py: Module for common pytest fixtures, also used for
passing data from one testcase to another.
Note: conftest.py has a class_testsuite fixture where board_root is
defined as the directory which will be added in a separate PR.
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
According to below rule which's from DWARF5 sepc, if the
attribute can't be founded in given DIE, check more entry
associated by DW_AT_abstract_origin.
For the purposes of determining whether a debugging information
entry has a particular attribute (such as DW_AT_name), if
debugging information entry A has a DW_AT_specification or
DW_AT_abstract_origin attribute pointing to another debugging
information entry B, any attributes of B are considered to be
part of A.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
This fix creates class variables SAMPLE_FILENAME & TESTCASE_FILENAME
in Class TestSuite and remove the hardcoded sample.yaml & testcase.yaml
from add_testcases function. This makes testing for sanitylib script
easier so that shippable do not detect the test_data for sanitylib
as actual zephyr testcases.
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
Add cpu time for QEMUHandler because the guest virtual time
in QEMU icount mode isn't host time and it's maintained by
counting guest instructions, we use QEMU process CPU time to
mostly simulate the time of guest OS.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Sometimes QEMU can't handle SIGTERM signal correctly and just
run as normal, in that case kill -9 QEMU process directly and
leave sanitycheck judge the testing result by console output.
For failures caused by other reasons, terminate all releated
processes to avoid CI waits 2 hours and reports timeout.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Add DT_NODE_BY_FIXED_PARTITION_LABEL that given a "label" in any
fixed-partitions map will return the node_id for that partition node.
Add DT_NODE_HAS_FIXED_PARTITION_LABEL that will test if a given
fixed-partitions "label" is valid.
Add DT_FIXED_PARTITION_ID that will return an unique ordinal value for
the partition give a node_id to the partition.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we have a fixed-partition on a flash device that is for example on
a spi controller we will not get a binding match currently. This is
because we expect a match between both the compatible and the fact that
fixed-partition node is a decendant of the spi bus.
To address this we treat fixed-partitions as if they are on no bus.
This has the effect of causing a binding match as well as ensuring that
when we process the fixed-partition node we will do anything special to
it because of the bus it happens to be under (for example SPI CS_GPIO
processing).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Setup node.compats right after we create the Node. This allows access
to the compats information in _bus_node.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Drivers cast the device config_info pointer to a driver-specific
structure. The referenced object is const-qualified; make sure the
cast doesn't inadvertently remove that qualifier.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Catch ImportError whenever a non-standard module import fails from any
runners that do one. Complain at runtime about it if the user actually
needs the runner.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This change enables specific compiler and linker options to be used in
the case that an arch/posix/os.arch.cmake file exists.
Note: os and arch in the above case are evaluations of
CMAKE_HOST_SYSTEM_NAME and CMAKE_HOST_SYSTEM_PROCESSOR.
Otherwise, the existing "generic" compiler and linker flags in
arch/posix/CMakeLists.txt are used.
Additional flags and checks are provided in
arch/posix/Linux.aarch64.cmake.
Added scripts/user_wordsize.py to detect if userspace is 64-bit or
32-bit, which should be consistent with the value of CONFIG_64BIT
for Aarch64 on Linux.
Fixes#24842
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
We don't need sanitycheck's use of EDT to report warnings, we'll get
them from the build system. So the warnings are just duplication and
noise, thus lets always suppress them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Usually, we want to operate only on "available" device
nodes ("available" means "status is okay and a matching binding is
found"), but that's not true in all cases.
Sometimes we want to operate on special nodes without matching
bindings, such as those describing memory.
To handle the distinction, change various additional devicetree APIs
making it clear that they operate only on available device nodes,
adjusting gen_defines and devicetree.h implementation details
accordingly:
- emit macros for all existing nodes in gen_defines.py, regardless
of status or matching binding
- rename DT_NUM_INST to DT_NUM_INST_STATUS_OKAY
- rename DT_NODE_HAS_COMPAT to DT_NODE_HAS_COMPAT_STATUS_OKAY
- rename DT_INST_FOREACH to DT_INST_FOREACH_STATUS_OKAY
- rename DT_ANY_INST_ON_BUS to DT_ANY_INST_ON_BUS_STATUS_OKAY
- rewrite DT_HAS_NODE_STATUS_OKAY in terms of a new DT_NODE_HAS_STATUS
- resurrect DT_HAS_NODE in the form of DT_NODE_EXISTS
- remove DT_COMPAT_ON_BUS as a public API
- use the new default_prop_types edtlib parameter
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Even though it is about to be done for sound technical reasons, a
subsequent patch adding access to all device nodes at the last minute
in the 2.3 release is going to be playing a bit of a fast one on
the Zephyr community, especially users of DT_INST APIs.
In particular, instance numbers are currently allocated only to
enabled nodes, but that will not be true soon: *every* node of a
compatible will be allocated an instance number, even disabled ones.
This is especially unfortunate for drivers and applications that
expect singletons of their compatibles, and use DT_INST(0, ...) to
mean "the one enabled instance of my compatible".
To avoid gratuitous breakage, let's prepare for that by sorting each
edt.compat2nodes sub-list so that enabled instances always come before
disabled ones.
This doesn't break any API guarantees, because there basically *are*
no ordering guarantees, in part precisely to give us the flexibility
to do things like this. And it does help patterns that use instances 0
through N-1, including the important singleton case.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
device_api attribute is not at offset 4 but 8 now as name and
config_info has been directly imported into struct device.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The macro iterates through the list of child nodes and invokes provided
macro for each node.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove semicolon between instance invocations of DT_FOREACH_IMPL_ and
thus DT_INST_FOREACH. This provides more flexibility to the user. This
requires we fixup in tree users to add semicolon where needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Abort if we find tests that are being skipped incorrectly. Tests should
be skipped using ztest_test_skip().
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Originally this only dealt with constant timeouts. Add the ability to
recognize integer parameters and convert them as well.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
These look up tables generalize the compat2enabled map in a way we
will need to make the API more flexible in Zephyr.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Let's get the actual node status, instead of relying on enabled.
Leave enabled in place for gen_legacy_defines.py's sake.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
If a devicetree node doesn't have a matching binding we will at least
populate a common standard set of properties for that node. The list of
standard properties is:
compatible
status
reg
reg-names
label
interrupt
interrupts-extended
interrupt-names
interrupt-controller
This allows us to handle cases like memory nodes that don't have any
compatible property, we can still generate the reg values.
We limit this to known properties as for any other property we can not
fully determine the property type without a binding and thus we can't
ensure the generation for that property is correct or may not change.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit reverts the device tree binding vendor prefix check regular
expression change that was introduced by the following commit:
5b10fac97e
The changed regular expression fails to detect the correctly specified
vendor prefixes in the `vendor-prefixes.txt`.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
While testing sanitycheck classes, found some wrongly initialisized
variables which caused issues, fixed those..
All Test* classes should now be ignored by pytest and should not be
treated as pytest code.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Zephyr uses some defines to provide additional information about the
item being declared. When unrecognized these can confuse the
Coccinelle parser so that it does not apply semantic patches in
situations where they should be applied.
Add a macro file that extends the Coccinelle builtin macro file with
some identifiers that are specific to Zephyr.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When files were added, matching did not work and we were counting added
files twice. Use sets to make sure we have a unique list of files.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Linux uses for_each in macros that produce loops; Zephyr uses
FOR_EACH. Update the corresponding checks to match Zephyr's spelling.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This takes the linux diffs between
a8c964eacb21288b2dbfa9d80cee5968a3b8fb21 and
16fbf79b0f83bc752cee8589279f1ebfe57b3b6e and applies them to the
Zephyr copy. Three changes did not apply cleanly:
* linux added a comment to the line that enables C99 comments;
Zephyr disallows them.
* linux uses vendor-prefixes.yaml; zephyr uses the older .txt file
* manual addition of colon in a check before BRACKET_SPACE error
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Some API that takes timeouts represented by integral milliseconds
recommended using the K_NO_WAIT and K_FOREVER constants, which are no
longer integers. This script replaces the incorrect arguments with
the corresponding legacy integral value.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
OSX compatibility added bossac runner.
Linux behvaiour is unchanged.
Window is now explicity mentioned as incompatible
Signed-off-by: Brendon Le Comte <brendon.lecomte@gmail.com>