Update menuconfig (and Kconfiglib, just to sync) to upstream revision
7e0b9f7ae1, to get these commits in:
menuconfig: Improve space/enter behavior slightly
Space toggles value is possible, and enters menus otherwise. Enter
works the other way around.
Make this explicit in the code, which also fixes some corner cases,
like space doing nothing on a y-selected menuconfig symbol.
-------------------------------------------------------------------
menuconfig: Fix display issue for unsatisfied-deps selected symbol
with children
A symbol with unsatisfied direct dependencies can end up with visible
children in an implicit submenu if it is selected (though that
generates a warning), so the optimization in _shown_nodes() isn't
safe, and causes the child nodes to not be shown outside show-all
mode.
Just remove the optimization. Trying things out some more,
everything's plenty fast enough anyway.
Checking the direct dependencies of the parent instead would be safe.
The menu path now says "(Top)" instead of "(top menu)" too, which is a
bit more compact. Make the same change in genrest.py.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This changes the declaration of fixed channels to be statically defined
with use of BT_L2CAP_CHANNEL_DEFINE since fixed channels are never
unregistered.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Adds a new argument to the jlink runner to reset the device after
loading code to flash. This fixes a problem with the lpcxpresso54114
board where it was necessary to manually reset the board to get new code
to start running after the 'ninja flash' command. This new argument is
optional and false by default because there are some cases were we must
not reset after load, such as when we load the application into ITCM on
imx rt devices.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Commit 88fb8bacfb ("scripts: improve west build's board handling")
lets us specify the board with a build.board config or BOARD
environment variable.
However, under some conditions, e.g. if the use has
build.pristine=auto and build.board=some_board, the following fails a
check_force call:
west build samples/hello_world
west build samples/philosophers
The problem is that the check_force wasn't made aware of the other
places a board can come from. Fix that.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Execute the test binary from the output directory instead of directory
where sanitycheck was started.
This will ensure that any artifact created with a relative path by the
test binary will be placed in the output directory instead of creating
the artifact in the directory where sanitycheck was executed and prevent
any possible conflicts.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
If we have something like:
#address-cells = <1>;
#size-cells = <0>;
intc: ioapic@fec00000 {
compatible = "intel,ioapic";
reg = <0xfec00000 0x100000>;
};
We should generate:
DT_INTEL_IOAPIC_FEC00000_BASE_ADDRESS_0
DT_INTEL_IOAPIC_FEC00000_BASE_ADDRESS_1
Instead we generated:
DT_INTEL_IOAPIC_FEC00000_BASE_ADDRESS
DT_INTEL_IOAPIC_FEC00000_BASE_ADDRESS_1
This was due to logic deciding if '_0' should be used not taking into
account #address-cells & #size-cells correctly.
Fixes: #16296
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
import linux-v5.1:Documentation/devicetree/bindings/vendor-prefixes.txt
Use vendor-prefixes.txt to check vendor prefixes
used in compatible strings and property names.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
on non-XIP system, SRAM is the default region, and relocated .data
section and .bss section of SRAM shouldn't be inserted between
_image_rom_start and _image_rom_end, because the memory region between
_image_rom_start and _image_rom_end will construct the mpu ro region.
Also for the newly added memory region on non-XIP system, the
relocated .text secition and .rodata section should also be mpu aligned.
Fixes: #16090.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
We generated some alias defines for children of a bus in which we had a
path alias for the bus node. We never used these defines, we don't
recommend they get used (child of busses should use instance defines)
and they were only generated in small handful of cases (for dts that had
path aliases to the bus node - i2c or spi).
Remove this as effectively dead code.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When Zephyr crashes immediately QEMU reports an error immediately. This
is immediately reported by "make run". Then sanitycheck points the user
at the output of "make run". However the error message(s) are in QEMU's
output which is in a different .log file.
To address this situation point the error message at handler.log
instead of run.log if and only if handler.log is not empty.
To reproduce here's an artificial but very simple crash:
sanitycheck --extra-args=CONFIG_TEST_USERSPACE=n \
-p qemu_x86 -T tests/kernel/mem_protect/stackprot/
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Add specific enum generation support related to usb 'maximum-speed'
property. This will generate a define with _ENUM with the integer
value of the enum as its ordered in the YAML. The assumption right
now is that there's a matching enum in the code.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Allows specifying the 'overlap' argument in IntelHex::merge().
This is identical to the --overlap argument in hexmerge.py, which
is bundled with IntelHex.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Let's not mess with CommandContextError here, as the APIs have gotten
messed around a bit in various versions. Just use log.die() as that
will work with current and future west versions, and is clearer anyway.
Fixes west 247.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Add a completion command that dumps the contents of a shell
completion file present in the zephyr repository.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This file was previously located in the west repository, under scripts/.
Since it now includes knowledge about specific behavior ef zephyr
extension commands, we move it here after overhauling it completely.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix issue where sanitycheck wrongly assumed tests inside ZEPHYR_BASE
to be outside ZEPHYR_BASE and dropped the prefix in their name. This
happened when:
- ZEPHYR_BASE contains symbolic link(s), and
- relative --testcase-root argument(s) are passed
To generate unique names, TestCase.get_unique(testcase_root) first
checks whether "testcase_root" starts with ZEPHYR_BASE. Either may or
may not include symbolic links so both must be canonicalized before
comparison. While fixing this method, replace explicit forward slash
"/" and string replace with os.path.relpath() and make a couple other
simplifications and minor pydoc fixes.
Add new canonical_zephyr_base = os.path.realpath(ZEPHYR_BASE) constant
and corresponding comments and guidelines.
The most visible effect of this mismatch was sanitycheck dropping the
--testcase-root prefix from the unique name of tests inside
ZEPHYR_BASE. This means some test names could be not unique anymore
and silently overwrite each other's results, example:
bash# cd zephyr_dir_with_symlink; export ZEPHYR_BASE=$(pwd)
./scripts/sanitycheck -T samples/portability/cmsis_rtos_v1 \
-T samples/portability/cmsis_rtos_v2
The more systematic and practical consequence (and how I actually
found this) was test outputs landing in unexpected locations.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Allow a device tree node to be child on one bus and parent on another
bus (e.g. an I2C slave device with multiple sub-devices).
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
gpio-map is a property of "nexus node", defined in dts v0.3.
It allows to describe a pin connector so it can be referenced
through phandles and hence used in expansion device nodes like a
shield header (typically implemented through overlays).
This change implements gpio controller resolution through these maps.
Few assumptions were taken in order to simplify the implementation.
These assumptions bring some limitations to the use of gpio-map
but my understanding is that this should still allow to cover most
use cases.
Assumptions:
-gpio-size is the same for all gpio-controllers referenced in a map
-optional properties gpio-map-mask and gpio-map-pass-thru are
supposed to be omitted
The understanding of this last assumption is that flags provided in
the expansion device node will overwrite the connector flags.
In a latter stage, when need happen, these limitations can be
revisited to unlock fully fledged gpio-map usage.
Fixes#15637
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
When run as "west -v build", make sure that the underlying build tool
is run in verbose mode as well (if the generator is known to support
it, which is the case for Unix Makefiles and Ninja based generators).
The per-generator hacks here are needed to support CMake 3.13. If we
move to CMake 3.14 or later, we can just run "cmake --build BUILD -v"
and be done with it.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Making a clean slate for a pylint test in CI.
'_' is a common name for non-problematic unused variables in Python.
pylint knows not to flag it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The west build --help output no longer fits in a single page. Move
details and examples into the documentation, so the -h output doesn't
require scrolling around.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Analogously to the Make options with the same names, these print the
commands which would have run without running them.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Adjust them so "west build -v" prints ZEPHYR_BASE and any CMake
commands, but none of the other more esoteric bits of information.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This can be used to override the default CMake generator
permanently. Its values are the same as those acceptable to cmake's -G
option.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
- Respect the BOARD environment setting.
- Don't require --force if the board can't be figured out: it might be
set in CMakeLists.txt, for example. Instead, downgrade to a warning
which can be disabled with "west config build.board_warn false".
- Add a build.board configuration option used as a final BOARD fallback
after CACHED_BOARD (in the CMake cache), --board (command line), and
BOARD (environment).
- Keep the config docs up to date.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
- This script didn't get fixed when cmake.py was renamed zcmake, so it
won't run; fix that.
- Change the default format string to '{name}' to keep things simple
- Flake8 lint
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Adds a new argument to the openocd runner to optionally specify the
config file. Updates the rv32m1_vega board to use different openocd
config files for the ri5cy and zero-riscy cores.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Notably fix the wrong comment I added in commit 6f011c95c4: when
testing with QEmu sanitycheck does _not_ spawn QEmu; it relies on "make
run" instead.
Searching the code for "Spawning" now cycles directly to all the places
starting processes and threads.
- Sample -v -v verbose output (lines wrapped for commit message check)
Spawning QEMUHandler Thread for \
qemu_x86/samples/hello_world/sample.helloworld 'make run'
- native_posix example:
Spawning process /home/.../sanity-out/native_posix/\
/samples/hello_world/sample.helloworld/zephyr/zephyr.exe
Spawning BinaryHandler Thread for native_posix/\
samples/hello_world/sample.helloworld
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Since west's main.py relies on the args tuple with the returncode
and the cmd, create the CalledProcessError using the correct
positional args.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a new "boards" command that is able to list all the boards in the
upstream tree. There is currently no support for out-of-tree boards.
The command executes cmake to use the built-in CMake script,
boards.cmake, to list the boards, and then stores the information
retrieved and allows the user to present it in a user-definable format.
Fixes https://github.com/zephyrproject-rtos/west/issues/53
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Move the existing CMake and build functionality from the west repository
to zephyr. The rationale behind this move is that it's very tightly
coupled with the Zephyr build system and is only used by the extension
commands implemented in the zephyr tree.
If additional extension commands in third-party repos want to use the
functionality they can add $ZEPHYR_BASE/scripts/west_commands to the
Python system path.
The implmentations in the west repo will be deprecated.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
On some systems where you don't have access to `PATH` and you can't
set the `ENV{PATH}` variable. You need to be able to pass the path
to the west executable down to the python script so it is better
for it to be set explicitly than assuming that it exsists as a
part of the PATH/executables in the shell being called.
Signed-off-by: Sigvart M. Hovland <sigvart.hovland@nordicsemi.no>
Adds a check in the jlink runner to look for the jlink executables and
print a more useful error message if they are not found.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This reintroduces support for static service in the form of a new API,
BT_GATT_SERVICE_DEFINE, and changes the internal services (GAP/GATT)
to be defined as const as they are never register/unregistered.
Internal service needed to be renamed in order to keep the same order
as before since the section elements are sorted by name.
The result is the following (make ram_report):
before:
gatt.c 572 0.66%
cf_cfg 32 0.04%
db 8 0.01%
db_hash 16 0.02%
db_hash_work 32 0.04%
gap_attrs 180 0.21%
gap_svc 12 0.01%
gatt_attrs 160 0.18%
gatt_sc 80 0.09%
gatt_svc 12 0.01%
sc_ccc_cfg 32 0.04%
subscriptions 8 0.01%
after:
gatt.c 210 0.24%
cf_cfg 32 0.04%
db 8 0.01%
db_hash 16 0.02%
db_hash_work 32 0.04%
gatt_sc 80 0.09%
last_static_handle 2 0.00%
sc_ccc_cfg 32 0.04%
subscriptions 8 0.01%
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The function error expects only one parameter. The excpetion handler in
scan_path was calling this function with multiple parameters instead of
formatting the string.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Fixes: #15664
This commit improve error messaging in case `west` list fails.
Previously any error messages and stack trace reported by `west` will
was thrown away by zephyr_module.py.
Now the error, as well as any stack traces, printed by `west` will be
re-printed to the user.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
