When storing an updated hardware list remove the serial property value
from entries that are not connected, to reduce confusion about exactly
what ttyACM0 is connected to.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Confirm to the user what devices were found and where they are before
starting a long run that might not have found everything it was supposed
to test.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Boards like mimxrt1060_evk are recognized by the scanner through their
USB device which has an ID, but in some cases the board may be
programmed using an external J-Link probe. Support this by adding a
probe_id key that can be added to the yaml dictionary to override the
use of id for this purpose.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add manufacturer and product identifiers to produce board information
for SiLabs and NXP hardware when using --generate-hardware-map.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit fixes the issue, that --enable-coverage alone did not create
coverage information. It also required to give --coverage-platform.
Now the fallback for coverage-platform to platform works as documented
also for enable-coverage, not only for coverage option.
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
The discard report is now generated for every run as
sanity-out/sanitycheck_discard.csv, the option --discard-report was
dropped.
Fixes#20804
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The interprocessor communication can be based on shared memory.
Allow to declare this memory as with a generic name derived from
chosen declaration.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
This command needs access to DT configuration, but can no longer
access it through BuildConfiguration since
9da1d41a12.
Import edtlib and use that instead.
Fix up some other error handling and output issues while we're here to
make the script's behavior easier to inspect and debug.
Fixes: #20545
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add support for boards that utilize the TI XDS110 like the CC3220SF,
CC3235SF, CC1352R1 and CC26x2R1 LaunchXL boards. The XDS110 can expose
multiple serial endpoints one for the uart device, but another for a
trace buffer. We assume that endpoint 0 will be the UART device.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add setting runner type to jlink for 'J-Link' and openocd for
'STM32 STLink' when generating the hardware map.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This makes the misc-flasher runner usable by passing the build
directory to the underlying tool.
Fixes: #20658
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit relocates the QEMU-specific code that currently resides in
ProjectBuilder.run to QEMUHandler.handle, in order to align with what
other handlers are doing.
For more details, refer to the PR #20573.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The current QEMUHandler implementation in sanitycheck does not check
for the process exit code and reports "PASS" even when either the QEMU
executable cannot be launched or exited immediately due to an error
(e.g. unsupported machine type, missing file, ...).
This commit adds QEMU process exit code check and error reporting when
the exit code is a non-zero value.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Python 3.5 and earlier do not preserve dictionary insertion order when
iterating over dictionaries, and do not give the same order between
runs. This broke the dtlib and edtlib test suites and made the output
jump around randomly between runs. It also made device INST_<n> numbers
non-deterministic, which broke some code on Python 3.5 (though
hardcoding device instance numbers in the code might be a bit shaky).
Fix it by using collections.OrderedDict instead of plain dict wherever
order matters. This makes the output identical on all supported Python
versions. It also allows testdtlib.py and testedtlib.py to run in CI,
which uses Python 3.5.
Fixes: #20571
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
edtlib is a library, and modifying yaml.(C)Loader directly interferes
with any binding loading in edtlib clients. To avoid that, add a custom
loader for bindings.
Internally, PyYAML does this, which is why defining a separate class
works:
@classmethod
def add_constructor(cls, tag, constructor):
if not 'yaml_constructors' in cls.__dict__:
cls.yaml_constructors = cls.yaml_constructors.copy()
cls.yaml_constructors[tag] = constructor
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
commit 0df4a53107 changed the behavior of
how openocd commands are passed to openocd. We used to add -c to each
command, now the commands are being added without -c causing an error.
This adds "-c" to all commands instead of just passing a list.
Also fixes#20449.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit extends the nrfjprog.py runner script so it adds
support for nRF53. In the wake of the changes done in the
runner script, we extend the testing done in test_nrfjprog.py,
adding the required coverage for the nRF53.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add API for accessing Electrically Erasable Programmable Read-Only
Memory (EEPROM) devices.
EEPROMs have an erase block size of 1 byte, a long lifetime, and allows
overwriting data on byte-by-byte access.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Update Kconfiglib, menuconfig, and guiconfig to upstream revision
faa1d21998, mostly to get this commit in:
Add public helpers for generating "<name> (defined at ...)" strings
Have Symbol/Choice.name_and_loc return strings like
"MY_SYM (defined at foo:1, bar:2)"
"<choice> (defined at foo:4)"
I've added a function like that in at least four different scripts
now, so that's probably a sign that it's a worthwhile helper.
Clean up the tests/Klocation tests a bit while adding tests.
Use the new helper to simplify kconfig.py a bit. Also clean it up a bit
by removing some unused stuff.
Some other minor improvements are included as well, e.g. to make
menuconfig/guiconfig give more helpful errors on invalid arguments.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add a cleaned-up version of a script I used to find a bunch of unused
symbols and some other Kconfig issues. It's set up to be run directly,
with few environment dependencies.
West is required, because the checks need to see Kconfig files and
source code from all modules.
Checks so far:
- Symbols that can never be anything but n/empty
- Symbols that look unused
- menuconfig symbols with empty menus
- Symbols only defined in Kconfig.defconfig files
See the help strings for the command-line flags for more information.
Some of these checks could probably be checked in CI later, though the
always-n and unused-symbol checks are a bit heuristic and might need a
lot of whitelisting.
Another reason I want to get this in is to have a clean standalone
reference for how to set up the environment for parsing the Kconfig
files. It's gotten trickier over time.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Turns
edt.required_by(node)
edt.depends_on(node)
into
node.required_by
node.depends_on
which might be a bit more readable.
One drawback is that @property hides that there's some slight overhead
in accessing them, but I suspect it won't be meaningful. Caching could
be added if it ever turns out to be.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Some boards require specific sequences of commands to run which aren't
generally useful for other boards. Add a catch-all runner to handle
these cases.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
(pinctrl-<index> is documented in
Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt in
Linux.)
Add a new Node.pin_states property, derived from any pinctrl-<index>
properties on the node. Node.pin_states holds a list of PinState
objects, where each PinState represents a single pinctrl-<index>
property.
For example, Node.pin_states will have two elements for the 'device'
node below:
device {
pinctrl-0 = <&state_0>;
pinctrl-1 = <&state_1 &state_2>;
pinctrl-names = "default", "sleep";
};
pincontroller {
state_0: state_0 {
...
};
state_1: state_1 {
...
};
state_2: state_2 {
...
};
};
Each PinState holds the list of configurations nodes in
PinState.conf_nodes. For the node above, node.pin_states[1].conf_nodes
will contain the pincontroller/state_1 and pincontroller/state_2 nodes,
for example.
The new functionality isn't used by gen_defines.py yet, so this change
is a no-op in itself, except it adds some error checking for
pinctrl-<index> properties.
If needed, support for #pinctrl-cells and 'pinmux' (not the same thing
as the 'pinmux' properties in Zephyr I think) could be added separately
later. Not sure what belongs in edtlib.py there yet.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Let the user specify these arguments as many times as they want:
--cmd-pre-init
--cmd-pre-load
--cmd-post-verify
This makes it a bit easier to handle scripts that need to do a few
things in a row depending on conditions.
Handle --cmd-pre-init and the port arguments properly in the debug
related targets.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
I'd like to support nRF boards in a more generic way, so make it
optional. We can clean up the STM32 files later if there's a lot of
overlap in their .cfg files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
None of the splitting logic is needed if 64-bit return
values or parameters fit inside a register.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We need to pass system call args using a register-width
data type and not hard-code this to u32_t.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit fixes an issue in windows where zephyr_modules.txt contains
a \ as path separator.
This causes issues later when using the path generated by
zephyr_module.txt are used as variables in CMake on windows.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
If we don't have a DTS (like nrf52_bsim) we shouldn't try and create an
EDT, but we still need to call expr_parser.parse to filter testcases.
So move the os.path.exists(dts_path) around the creation of the EDT.
Fixes: #20371
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we have something like dma-names we should ended up generating
something like:
DT_ST_STM32_I2S_40015000_RX_DMAS_CONTROLLER_1
This isn't quite what we expect. We should instead get:
DT_ST_STM32_I2S_40015000_RX_DMAS_CONTROLLER
DT_ST_STM32_I2S_40015000_DMAS_CONTROLLER_1
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
nrf52_bsim does not generate any DTS data to be processed by
sanitycheck, skip filtering if we have no dts data.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Device tree nodes have a dependency on their parents, as well as other
nodes. To ensure driver instances are initialized in the proper we
need to identify these dependencies and construct a total order on
nodes that ensures no node is initialized before something it depends
on.
Add a Graph class that calculates a partial order on nodes, taking
into account the potential for cycles in the dependency graph.
When generating devicetree value headers calculate the dependency
graph and document the order and dependencies in the derived files.
In the future these dependencies may be expressed in binding data.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
environment is passed to execution thread and should be available
regardless of SAN being enabled or not.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
